Parts for Echo PE-201: Intake / Exhaust Pe-201 Parts

The wing nut seen here is used for the air filter covers on many different types of handheld outdoor power equipment. Other names for the wing nut include wing bolt and wing stud. This nut has “wings” at the top, which allows the users to turn them by hand to tighten or loosen them. This wing nut is used to secure the air filter cover and air filter to the air cleaner case. The wing nut could need to be replaced for many reasons. It could have damaged threads, or it could have become broken or corroded. The nut could have become lost when the owner was changing out the air filter or replacing the case, as well. Owners will want to get a new wing nut if there are any issues with the one currently on their machine. Whenever working with any type of outdoor equipment and parts, it is a good idea for users to wear gloves to keep their fingers safe. The wing nut is a genuine OEM replacement part that is sold individually. It can be used for tillers, leaf blowers, pole pruners, edgers, string trimmers, and hedge trimmers. The nut is compatible with models from Echo, Shindaiwa, and Little Wonder.

The air filter cover, sometimes called an air cleaner cover, is a replacement part that works on several types of lawn and garden equipment. This part keeps larger debris, which could otherwise damage or quickly clog the filter, from contacting the air filter itself. The cover still provides the clearance needed for air to properly enter the carburetor. The air filter cover often comes into contact with large pieces of debris. In some cases, the debris could cause damage, which would require the cover to be replaced. The cover could also have problems due to normal wear and tear. The replacement of the cover is fast and easy. The authentic OEM air filter cover is sold individually. It works on tillers, string trimmers, leaf blowers, hedge trimmers, pole pruners, and edgers. Brands that are compatible with this air filter cover include Echo and Shindaiwa. Buyers should consult their owner's manual to be sure they are choosing the right cover for their make and model.

This is a genuine OEM replacement choke label sourced directly from the manufacturer. This label is used on many different pieces of outdoor lawn and garden equipment that are outfitted with a choke. The label indicates to the operator the direction to move the choke for a cold start and then the direction to move the choke when it is running or for idle. This is a generic label that does not identify the equipment brand. This makes it usable for any piece of equipment with a choke.Over time, this label can become worn and unreadable. Replacing the label keeps the machine looking newer and also provides instructions for anyone using the equipment for the first time. The choke controls the amount of air going into the carburetor. The label is a self-stick piece that does not require tools to install. Pull the old label off. Clean the area to remove any residual glue. Peel the backing off the sticker and apply to the equipment. This label is sold as an individual unit. It is compatible with blowers, cultivators, edgers, pruners, pumps, reciprocating saws, and other engines with a choke manufactured by Echo, Little Wonder, Shindaiwa, and other companies.

This part is the replacement air filter for the small engine that powers several outdoor tools and equipment. It comes with a black plastic rim measuring 2.5 x 2.5 inches. It prevents dirt and debris from entering the carburetor and engine where they can cause severe damage. This type of air filter has a limited life span. Once it becomes clogged or dirty, it must be replaced rather than cleaned. Cleaning is not a long-term solution and may ultimately result in damage to the engine. A dirty or clogged filter will restrict airflow and affect engine performance. If the filter is damaged, it will have to be replaced as well. In general, air filters must be changed annually for a healthy engine. This part works with different outdoor power tools like the chipper, edger, grass trimmer, hedge trimmer, leaf blower/vacuum, pole saw, pole pruner, shredder, tiller, and water pump. It is compatible with specific products from brands like Echo, Shindaiwa, and Little Wonder. It is an OEM part sourced directly from the manufacturer and is sold individually.

This is a genuine replacement bracket that is designed to fit select lawn and garden equipment engines. The bracket is responsible for helping to secure the air filter inside of the filter cover assembly. This metal bracket screws into place, and is often removed to replace the air filter as a part of routine maintenance. This screw could become damaged or worn over time with regular use, or it could even become lost during maintenance and need to be replaced. Always use a genuine OEM replacement like this bracket, which is manufactured to exact standards by Echo. This part can be used in trimmers and blowers from Echo, Shindaiwa, and Little Wonder. It does not require any tools to replace. Simply remove the cover assembly, take off the old bracket and then screw on the new bracket. Then, replace the cover and the unit will be fixed. This bracket is made of durable metal and sold as an individual unit. It does not include any additional parts or hardware. The air filter will need to be replaced as a part of routine maintenance, which is a good time to inspect the bracket and make sure that it's not showing signs of wear before it is completely broken or lost.

The intake gasket is designed to act as a seal between the cylinder head and the heat dam. It keeps the engine sealed and protected during use. Not only does this reduce the risk of damage to the engine on various lawn equipment units, but it eliminates potential leaks that could reduce engine power or performance and ensures maximum flow to the engine. Gaskets can become worn or damaged over time with regular use or they can break unexpectedly. This Echo gasket is made from compound material that is durable and designed to withstand the high heat inside of an engine. Use it to replace the gasket in compatible lawn equipment. This gasket is an OEM part that is designed to fit many Echo and Little Wonder lawn and garden equipment engines. There are more than 150 compatible models in total, including blowers, pumps, reciprocating saws, cultivators, edgers, and other saws. Check your user manual for compatibility and to see if there are any special replacement instructions to consider.

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

The insulator acts as a protective cover that secures onto the carburetor to keep it safe from the heat coming off of the engine block. The insulator is made of a durable compound material to offer the best protection possible. Through use, the insulator can crack or become damaged. This will let air get into the engine, creating lean conditions that can cause engine problems as time goes on. If this happens, the insulator will need to be replaced. This can be done by removing the air filter, draining the fuel, and removing the intake assembly. Remove the insulator from the engine before installing the new replacement insulator. Thread the mounting screws through the air cleaner case and bracket, so it fits flush against the case. Reinstall the other components before use. This is a genuine OEM insulator for Echo, Mantis, and Little Wonder trimmers, water pumps, hedge trimmers, tillers, pole saws, and edgers. It is sold as an individual component, and a screwdriver will be needed to make the replacement.

The manufacturers of Echo, Shindaiwa, and Little Wonder tools use this #5 nut at various points in more than 150 gasoline powered tools. Included among them are hedge trimmers, power saws, pruners, grass trimmers, edgers, leaf blowers, and chainsaws. The #5 nut is a lock nut, one that does not need a lock washer to prevent it from coming loose when it is used to bolt one piece of metal to another. Each of these devices has an engine housing and metal superstructures that call for metal parts to be joined together, which is were the #5 nut comes into play. As it is a small piece, and because it is used in so many places and for so many reasons, #5 nuts are often lost. Occasionally they are not tightly fastened after a repair. More often, they are simply set aside and forgotten. For this reason, it is a good idea for users to purchase several of these hardware pieces at a time. Like all our other products, this #5 nut is an OEM genuine replacement part. This means the original manufacturer machined this part or that it was built according the same specifications as the original so as to be a perfect match.

This 5 x 55 hex bolt is designed for many types of lawn and garden equipment. It is generally used to secure the muffler in place. Each bolt is made of durable metal. If the bolt snaps or becomes damaged or corroded, it will need to be replaced. Keeping a defective hex bolt installed can cause the muffler to eventually come loose.A visual inspection of the hex bolt will indicate whether it is working correctly. If it needs to be replaced, a screwdriver will be required. Place the lawn and garden equipment on a flat surface and remove the spark plug wire for safety. The bolts and any other damaged parts can be removed. Use an Allen wrench to add in the new hex bolt.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The 5 x 55 hex bolt is designed to be used with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Shindaiwa, Echo, and Mantis.

A spark arrestor screen, also known as a muffler screen, is a component that prevents flammable debris from reaching the engine. Through regular use, the screen can become worn and require replacement. When the screen becomes clogged, it is possible to try cleaning it. Removing it and holding it with pliers will allow the use of a torch to remove excess debris before reinstallation. When the arrestor screen becomes worn or damaged, it needs to be replaced. This may be apparent if the muffler begins to put out debris. It may also need replacement if the gardening equipment is no longer running at the correct power. The screen is located within the muffler, though it will vary depending on the model. The owner’s manual for your machine will indicate where to find the component. This spark arrestor screen is a genuine OEM replacement part that is not part of an assembly or a kit. It’s made of metal and sold on an individual basis. A screwdriver and pliers will be needed to make the replacement. The part works with hedge trimmers, pole saws, edgers, tillers, water pumps, and chippers by Echo, Little Wonder, and Shindaiwa.