Parts for Echo PE-201: Carburetor-Rb-K70a (Pe-200) Parts

This O-ring is used with Echo and Shindaiwa small gasoline powered engines. These engines are used to power a number of yard and landscaping tools, including grass trimmers, edgers, blowers, power vacuums, pole saws, and chippers. The O-ring forms a seal between the carburetor and the cylinder so that no outside air gets into the cylinder. While the O-ring is made of a durable form of rubber, the constant heating and cooling of the manifold, plus the pressure generated in the combustion chamber eventually wear on the ring. A rough running engine may be a sign of a damaged O-ring. If the air filter is clean and the gasoline is new, it's a good bet that the O-ring is no longer forming a perfect seal and must be replaced. The O-ring sits behind the carburetor against the cylinder manifold. In order to replace it, the user must remove the air filter cover and filter, as well as the carburetor. Because this repair is somewhat involved, the user may decide to replace carburetor gaskets and the air filter and pre filter at the same time. Remember to use a replacement ring like this one, that is OEM certified to be identical to the factory original.

This high speed needle valve is used in various types of lawn and garden equipment. It is a standard piece of hardware that may be used for different purposes based on the model of the unit that a user owns. In many cases, the high-speed needle valve fits into the carburetor block and helps the equipment run at top performance. In some cases, the high-speed needle valve will become damaged and need to be replaced. The needle valve is part of the float valve along with the float and seat. The needle sits inside of the seat and when it is forced in, it prevents fuel from going into the float bowl. The valve should be open when the carburetor is dry and closed when the fuel chamber is filled. When replacing this component, basic tools and work gloves will be needed.This high speed needle valve is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The needle valve is created to be compatible with string trimmers, hedge trimmers, leaf blowers, edgers, and pole pruners manufactured by Echo and Shindaiwa.

This part is a replacement retainer screw used on outdoor power equipment. While the retainer screw is small, it is an important component that is used to keep the primer bu cover and air purge body assembly attached to the carburetor.A replacement retainer screw may be needed if the operator finds that the primer bu cover and air purge body assembly has become detached from the carburetor. The operator may notice that the screw is missing. Since it is small, it's easy to lose it if it becomes loose. Make sure to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine Echo part and is an OEM part sourced directly from the manufacturer and it is sold individually. This replacement retainer screw is used on a variety of outdoor power equipment machines manufactured by Echo and Shindaiwa, including blowers/vacuums, pole saws, edgers, grass trimmers, and hedge trimmers.