Kenmore / Sears Dishwasher Pump

The Circulation Pump Assembly is an OEM component specifically designed for Bosch dishwashers. It is responsible for circulating water during the wash cycle and helping dishes get properly cleaned. 

Causes of a bad circulation pump assembly can include normal wear and tear, as well as damage from debris getting caught in the pump mechanism over time. 

Symptoms of a bad circulation pump assembly include:

• Inability to circulate water, resulting in poor wash performance  
• Loud noises or vibrations coming from the pump area
• Leaks around or below the pump housing

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours today to restore optimal water circulation for thorough yet gentle cleaning.
 

This replacement impeller fits inside the pump to move water through the appliance's system. A worn or broken impeller can lead to weak circulation, poor cleaning results, or a motor that hums without moving water. What it does:

• Mounts on the pump shaft to push water and create flow/pressure
• Helps deliver spray action and/or discharge flow for proper cycle operation
• Typical symptoms include poor wash performance, little/no water movement, or unusual grinding/rattling from the pump area

• 1 impeller

• Disconnect power and shut off water before servicing
• Access the pump assembly; remove lower panels or the sump as needed
• Clear debris, then install the impeller in the correct orientation, keeping any spacers in order
• Reassemble, restore power/water, and check for leaks and proper operation

The Dishwasher Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing water from the dishwasher at the end of each cycle, ensuring that dishes are properly cleaned and dried.

Causes of a bad drain pump can include wear and tear from regular use, blockages from debris, or electrical malfunctions.  

Symptoms of a bad drain pump include:

• Water not draining from the dishwasher
• Unusual noises during the drain cycle
• Error codes related to drainage issues
• Water pooling at the bottom of the dishwasher

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part is a pump and motor assembly. This component is made for use on dishwashers and is responsible for pumping water through the spray arms during the washing cycle. This part is essential for the operation of the appliance. If there is no water circulation during the dishwashing cycle, then the pump and motor assembly will need to be replaced. The spray arms spin during the washing process and this assembly causes the arms to spin, so if they are not spinning, this will be the correct replacement part. It is advised that the person performing the repair unplug the dishwasher from the electrical outlet or turn off the house circuit breaker for the dishwasher before attempting to replace this part. This particular pump and motor assembly is compatible with dishwashers that are manufactured by the Whirlpool, Kenmore, and Jenn-Air brands. It is sourced directly from the manufacturer and is sold individually.