Kenmore Elite Blower Wheel Or Fan Blade
Genuine Lg part
By: Lg
Part Number: 5901JA1012B
The Condenser Fan Blade is an OEM replacement part for LG refrigerators. The condenser fan motor blade is located on the condenser fan motor which is usually located on or near the compressor at the back of the refrigerator. This part is responsible for circulating air over the condenser coils. This helps to remove heat from the condenser and evaporate water in the defrost drain pan.
Causes of blade failure can include normal wear over extended runtime, accumulated dirt and dust impeding airflow, or physical impact damage.
Symptoms of a faulty condenser fan blade include:
- Refrigerator fails to properly cool and maintain temperatures
- Condenser unit runs excessively as heat fails to dispel
- Abnormal noises such as grinding or squealing emanate from the condenser area
This OEM LG part is also compatible with some Sears/Kenmore model refrigerators.
Do-It-Yourself Stories from Customers like You
Error code cf Robert A. • San Jose , CA • June 27, 2016
I bought a new cooling motor and blade and installed it, everything seems to be working fine now, did not take that long to fix, maybe about 30 minutes, the longest part was trying to get the old fan off the old motor, finally had to cut it off with bolt cutters, I have a 12 year old LG Refrigerator 26930 double door, if you are handy its not that hard. I had to remove a couple parts in front of the motor to get to it, but very easy. Better than buying a new refrigerator...:). I replaced the...
Read more
More
$29.79
- Compare At:
-
$35.75
- You Save:
-
$5.96
Genuine Lg part
By: Lg
Part Number: 5835EL1002A
The Blower Wheel is an OEM part for LG dryers. This part circulates air through the dryer drum and out the exhaust vent, ensuring proper airflow for efficient drying of clothes.
Causes of a bad blower wheel can include accumulation of lint and debris, wear and tear over time, or physical damage due to foreign objects entering the blower housing.
Symptoms of a bad blower wheel include:
- Reduced or no airflow from the exhaust vent
- Unusual noises such as rattling or squealing during the drying cycle
- Clothes taking longer to dry or remaining damp
- Overheating or frequent shutdowns of the dryer
This OEM LG part is also compatible with some Kenmore models.
This part fixes the following symptoms
-
Too hot
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer would start then quit after about 5 seconds. No error codes-timer running nasal burnt smell. Larry T. • Morristown , TN • December 10, 2017
I replaced the dryer motor. I followed the repair video on the Appliance Parts Pro site, with a few modifications to the procedure. I loosened the control panel and flipped it forward to improve access to the wiring connectors. I also loosened the front panel and tipped it forward before disconnecting the door switch as there wasn't enough space to disconnect the switch otherwise. Removal of the blower assembly required the use of penetrating lubricant as the assembly was stuck on the motor...
Read more
More
$88.95
- Compare At:
-
$106.74
- You Save:
-
$17.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 318398302
This replacement fan blade mounts to the appliance's fan motor to move air as designed. Installing a new blade restores proper airflow and helps reduce vibration or noise caused by bent, cracked, or worn fins. What it does
- Attaches to the fan motor shaft to move air through the cavity or across internal components
- Supports even air circulation or cooling performance, depending on model
- Helps resolve issues such as loud scraping/whirring, vibration/wobble, weak airflow, or visible blade damage
What's included
Install notes
- Disconnect power at the breaker and allow the appliance to cool completely before servicing
- Access the fan assembly from the rear panel or inside the oven behind the fan cover (varies by model); wear gloves—edges can be sharp
- Note blade orientation/rotation and securely reinstall using the original fastener(s)
- Hand-spin the blade to ensure clearance and free movement before reassembly and testing
Do-It-Yourself Stories from Customers like You
Oven won't turn on, control board failure convection motor failure Jonathan O. • Lorena , TX • November 12, 2018
Everything was straight forward and easy to repair, I had an appliance tech come out and troubleshoot the repair and watched what he did and asked questions. I then ordered the parts from here and did the repairs myself and saved on having the tech make another trip out.
Read more
More
$33.95
- Compare At:
-
$40.40
- You Save:
-
$6.45
Genuine Lg part
By: Lg
Part Number: 5901JA1013A
This condenser fan assembly circulates air across the condenser coils and compressor to remove heat from the refrigeration system. Replacing a failing fan helps restore efficient cooling performance and protects the compressor from overheating. What it does:
- Draws air through the condenser coils to dissipate heat
- Supports proper system pressures and overall cooling efficiency
- Helps maintain stable temperatures in both compartments
- Common symptoms include the fan not running, loud noise from the rear, warm cabinet temperatures, or a very hot compressor area
What's included:
- Pre-assembled fan motor with blade and mounting bracket
Install notes:
- Disconnect power before servicing; use gloves to protect against sharp edges
- Access the lower rear compartment and remove the back cover to reach the fan
- Note wire positions; move over any reusable grommets or screws and secure the assembly firmly
- The blade spins freely and is oriented to move air across the condenser; clean coils before restoring power
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Popular Kenmore Elite Models