Kenmore Elite Washer Valve
Genuine Lg part
By: Lg
Part Number: 5220FR2006H
The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines, designed to control the flow of water into the laundry tub. This part is responsible for opening and closing to allow water into the wash drum at the appropriate times during the wash cycle, providing the correct water level and temperature.
Causes of a bad Water Inlet Valve Assembly can include mineral deposits blocking the valve, electrical failure preventing the valve from opening or closing properly, or physical damage to the valve mechanism itself.
Symptoms of a bad Water Inlet Valve Assembly include:
- Inadequate filling of the washer drum
- Water entering the drum when the washer is off
- Unusual noises during the fill cycle
- Water that is too hot or too cold, indicating a failure in valve operation that controls temperature
This OEM LG part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
-
Shuts off too soon
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$33.44
- Compare At:
-
$39.79
- You Save:
-
$6.35
Genuine Lg part
By: Lg
Part Number: AJU75152601
The Water Inlet Valve is an OEM replacement part specific to LG washing machines. It is an electronic solenoid valve located near the water supply inlet ports that controls the flow of water into the washer tub. The inlet valve precisely regulates water levels during different phases like filling, washing, rinsing, and spinning cycles.
Causes of a bad water inlet valve can include worn or faulty electronic components, mineral buildup obstructing valve movement, or damage to seals and diaphragms.
Symptoms of a bad water inlet valve include:
- Inability to properly fill the washer tub during cycles
- Water leaking or flooding from the valve area
- Erratic water temperature or varying fill levels between loads
- Cycles failing to advance due to inadequate or unregulated water flow
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Will not fill with water
-
Shuts off too soon
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
LG washing machine would not shut off cold water during rinse cycle Richard W. • Denton , TX • May 22, 2018
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and...
Read more
More
$146.73
- Compare At:
-
$173.14
- You Save:
-
$26.41
Genuine Lg part
By: Lg
Part Number: 5220FR2008F
The Inlet Valve Assembly is an OEM part for LG washing machines. It controls the flow of water into the washing machine during different cycles, ensuring the correct amount of water enters the tub for optimal washing performance. The assembly includes solenoids that open and close the valve based on signals from the washing machine’s control board.
You should replace this inlet valve assembly if it becomes faulty or damaged. Causes of a bad inlet valve assembly can include mineral buildup from hard water, electrical faults, or wear and tear from regular use. A malfunctioning valve can lead to issues with water flow, affecting the machine’s washing efficiency.
Symptoms of a bad inlet valve assembly include:
- No water entering the washing machine
- Water entering too slowly or at an inconsistent rate
- The washing machine not filling properly
- Water leaks from the valve area
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$118.30
- Compare At:
-
$140.78
- You Save:
-
$22.48
Genuine Lg part
By: Lg
Part Number: 4769ER4001B
The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.
Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism.
Symptoms of a bad Float Assembly include:
- Water overflowing from the washing machine
- Inadequate water levels that affect the washing cycle's effectiveness
- The washing machine failing to start the fill cycle due to a malfunctioning float switch
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
LG front loading washer leaking water. James R. • Pepperell , MA • July 15, 2022
The hot inlet valve was dripping water, replaced it. Water and soap were coming out of the vent pipe. The new Float assembly had a shorter shaft than the old Float Assembly I was replacing. I did install the new Float Assembly and cleaned the vent hose where the float seats and I haven't seen any more water on the floor. Both repairs were made easy by watching your repair videos.
Read more
More
$28.64
- Compare At:
-
$34.08
- You Save:
-
$5.44
Genuine Lg part
By: Lg
Part Number: 5221ER1003A
This three coil solenoid is used for the cold water, bleach dispenser and prewash.
Do-It-Yourself Stories from Customers like You
The valve assembly started leaking so i ended up needing to replace it before too much water got on the inside parts or on the floor! Benjamin M. • Lynchburg , VA • February 12, 2016
1. I unplugged the washer from outlet
2. I turned off the hot and cold water taps going to the washer (both just in case)
3. Draped a towel over back edge of washer and under where hoses coming from water outlets attach to back of washer (to catch any loose water out of the hose or screw nozzle leading to valve assembly, then unscrew (by hand) the cold water hose from back of washer (leave hot water hose alone as not needed).
4. Unscrew valve assembly from washer by two screws on back top of...
Read more
More
$104.04
- Compare At:
-
$114.44
- You Save:
-
$10.40
Genuine Lg part
By: Lg
Part Number: 5220FR2006W
The Hot Water Valve is an OEM part for LG washing machines. It regulates the flow of hot water into the wash tub during the appropriate cycles. The valve allows hot water to enter the wash tub to help wash clothes thoroughly and effectively at warmer temperatures.
Causes of a bad hot water valve include mineral or lime buildup inhibiting proper operation, worn internal components due to age and use, or damage from freezing during winter months.
Symptoms of a bad hot water valve include:
- Only cold water entering the wash tub, even on hot cycles
- Fluctuating hot water temperature during cycles
- Leaks from the hot water valve area
- Inability to select hot water temperature settings
This LG part is also compatible with some Kenmore models.
More
$62.95
- Compare At:
-
$74.91
- You Save:
-
$11.96