Kenmore Elite Washer Parts
Genuine Lg part
By: Lg
Part Number: 4681EA2001T
The Drain Pump and Motor is an original LG (OEM) replacement part for LG made washing machines that is responsible for removing water from the washer at the end of the wash cycle. The pump forces water out through the drain hose so that clothing comes out free of excess water, making the drying process faster.
Symptoms of a failing Drain Pump Motor include:
- Water not draining out of the washing machine
- Noisy or unusual sounds coming from the pump area during the drain cycle
- The washing machine stopping mid-cycle
Causes of a bad Drain Pump Motor can range from obstructions in the pump or hose, which can strain or damage the motor, to wear and tear from regular use leading to motor failure. Electrical issues can also affect the motor's performance, preventing it from operating correctly.
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Lg washer not draining odd sounding pump noise Tom K. • Blaine , WA • September 07, 2014
It was fairly obvious that the washer drainer motor had failed, water was not draining, filter was clean (bottom lower left panel door, have a pail ready!) and drain line was not blocked.
Someone had provided great advice on the Appliance Parts Pro's site about replacing the drain motor from the bottom. Great suggestion! Easy to do, although be prepared for more water to drain from the washing machine onto the floor after you lay it over.
I carefully lowered the machine onto it's back,...
Read more
More
$55.44
- Compare At:
-
$65.97
- You Save:
-
$10.53
Genuine Lg part
By: Lg
Part Number: 5220FR2006H
The Water Inlet Valve Assembly is an OEM replacement part for LG washing machines, designed to control the flow of water into the laundry tub. This part is responsible for opening and closing to allow water into the wash drum at the appropriate times during the wash cycle, providing the correct water level and temperature.
Causes of a bad Water Inlet Valve Assembly can include mineral deposits blocking the valve, electrical failure preventing the valve from opening or closing properly, or physical damage to the valve mechanism itself.
Symptoms of a bad Water Inlet Valve Assembly include:
- Inadequate filling of the washer drum
- Water entering the drum when the washer is off
- Unusual noises during the fill cycle
- Water that is too hot or too cold, indicating a failure in valve operation that controls temperature
This OEM LG part can also be used on Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
-
Shuts off too soon
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Lg wm2487hwm laundry machine had cold water overflowing and intermittent cold water operation on lg Bruce S. • Van Nuys , CA • December 13, 2015
Replaced the cold water valve unit (has 4 ports and 1 inlet) which is very straight forward;
requires : 1 phillips screwdriver ~#2
1 needlenose plier, medium size
1 channel lock plier, medium size
1 marker pen
1 - cold water valve assembly # AP4445613
1 - hot water valve assembly #AP4441935
1 - water level pressure switch #AP4440713
an old towel or two for absorbing small amounts of water
a cellphone / camera for making sure you have the...
Read more
More
$48.44
- Compare At:
-
$59.79
- You Save:
-
$11.35
Genuine Lg part
By: Lg
Part Number: 4036ER2004A
The Tub Seal Gasket is an OEM part for LG washing machines. It creates a tight seal between the inner and outer tubs during the wash cycle, preventing leaks and containing water. The gasket helps prevent water from escaping the tub.
Causes of a bad gasket can include wear and tear from repeated use over time, exposure to cleaning chemicals or extreme temperatures, or damage from handling heavy loads.
Symptoms of a bad gasket include:
- Water leaking from the outer tub during operation
- Excessive moisture in areas surrounding the washer
- The tub making creaking or grinding noises
- Decreased washing or spinning performance
This OEM LG part can also be used on Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: EBF49827801
The Washer Door Lock Switch is an OEM part for LG washing machines. This critical safety feature locks the washer door during operation to prevent it from being opened, which ensures safety and proper functioning. The door lock switch also communicates with the washer's control system to indicate that the door is securely closed and the machine can begin its cycle.
Symptoms of a bad Washer Door Lock Switch include:
- The washing machine refusing to start, despite the door appearing to be closed.
- The door failing to lock properly, or the lock releasing prematurely during a cycle.
- Error messages on the washer's display related to door closure issues.
Causes of a bad door lock switch can include mechanical failures such as worn or damaged locking mechanisms, electrical issues like faulty wiring or failed solenoids, or alignment problems that prevent the door from engaging the switch properly.
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Lid or door won't close
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
E0 code replaced drain pump and circulating motor the door switch assembly was separate issue. Ann M. • Coral Springs , FL • May 09, 2020
Superfast parts delivery. Got packages by the second day. Videos were extremely helpful and well done; we couldn't have done without them although we came across slight differences in our machine and found workarounds. Our machine did not drain the water so I drained the water manually via drain tube at bottom of the machine and checked the filter for blockage. All clear so I read articles on the internet and watched videos and took a chance on replacing the drain pump and circulating motor...
Read more
More
$67.95
- Compare At:
-
$80.18
- You Save:
-
$12.23
Genuine Lg part
By: Lg
Part Number: 4036ER4001B
The Washer Gasket is an OEM replacement part for LG washing machines. It is a flexible seal that lines the opening of the washer tub, creating an airtight barrier to prevent water leaks and ensure proper containment during the wash and spin cycles.
Symptoms of a bad washer gasket include:
- Water leaking from the front of the washing machine
- Excessive moisture or condensation buildup around the gasket area
- Difficulty in properly closing and latching the washer door due to a worn or damaged gasket
Causes of a washer gasket failure can range from general wear and tear over time, to physical damage from being pinched or cracked, to improper installation or alignment issues.
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Lg part
By: Lg
Part Number: MAP61913707
The Tub Bearing is an OEM replacement part for LG washing machines. It is a crucial component that supports the weight of the tub and allows for smooth rotation during the wash and spin cycles.
Causes of a bad tub bearing can include excessive wear over time due to high-speed spinning, damage from overloading or unbalanced loads, or lack of proper lubrication.
Symptoms of a bad tub bearing include:
- Loud grinding or growling noises during the wash or spin cycle
- Excessive vibrations or shaking of the washing machine
- Leaks due to increased stress on the tub and other components
- Difficulty in starting or maintaining the spin cycle
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Lg part
By: Lg
Part Number: AGM73610701
The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.
Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.
Symptoms of a bad Magnetic Door Plunger include:
- The washing machine door not staying closed during cycles.
- The machine failing to start due to a door sensor not detecting closure.
- Random pausing of the machine during operation if the door unlatches.
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken tab on old magnet holder Joel E. • Granite Falls , NC • December 27, 2016
This was a super-easy repair. You have to line up the spring so that it sits on the bumps inside the magnet holder and the door, then you have to line up the tabs on the magnet holder so they will slide into the slots on the door. Then you just push it in. Repair took less than a minute.
Read more
More
$17.75
- Compare At:
-
$21.12
- You Save:
-
$3.37
Genuine Lg part
By: Lg
Part Number: AJU75152601
The Water Inlet Valve is an OEM replacement part specific to LG washing machines. It is an electronic solenoid valve located near the water supply inlet ports that controls the flow of water into the washer tub. The inlet valve precisely regulates water levels during different phases like filling, washing, rinsing, and spinning cycles.
Causes of a bad water inlet valve can include worn or faulty electronic components, mineral buildup obstructing valve movement, or damage to seals and diaphragms.
Symptoms of a bad water inlet valve include:
- Inability to properly fill the washer tub during cycles
- Water leaking or flooding from the valve area
- Erratic water temperature or varying fill levels between loads
- Cycles failing to advance due to inadequate or unregulated water flow
This OEM LG part is also compatible with Sears/Kenmore models.
This part fixes the following symptoms
-
Will not fill with water
-
Shuts off too soon
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
LG washing machine would not shut off cold water during rinse cycle Richard W. • Denton , TX • May 22, 2018
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and...
Read more
More
$146.73
- Compare At:
-
$173.14
- You Save:
-
$26.41
Genuine Lg part
By: Lg
Part Number: 383EER3001J
The Washing Machine Shock Absorber Kit is an OEM part for LG washing machines. This kit includes a shock absorber designed to reduce vibrations and absorb shocks during the wash cycle, providing stability and minimizing excessive movement.
Over time, the shock absorbers can wear out due to regular use, exposure to heavy or unbalanced loads, or damage from impact. These factors can lead to reduced effectiveness of the shock absorbers, causing increased vibrations and noise.
Symptoms of a bad shock absorber kit include:
- Excessive shaking or vibrating during the wash cycle
- Loud banging or thumping noises
- The washer moving or "walking" during operation
- Leaks due to increased stress on the tub and other components
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Lg washer: roaring bearings pump noises not draining properly and clogged hoses Albert W. • Germantown , MD • October 07, 2018
Our 10-year-old LG WM2487HWMA front load washer had gradually developed multiple problems. It sounded like a jet engine during high speed spin, both the drain pump and circulation pumps were noisy, it would not drain properly (water was coming in during spin cycle), no water was spraying out at the top of the door into the drum like it is supposed to when the circulation pump was running. It's amazing we had still been able to wash clothes at all! With the help of the excellent...
Read more
More
$40.78
- Compare At:
-
$48.94
- You Save:
-
$8.16
Genuine Lg part
By: Lg
Part Number: 6501EA1001R
The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.
Symptoms of a bad water level pressure switch:
- Washing machine not filling with water or not stopping when the desired water level is reached
- Excessive water intake, leading to overfilling and potential leaks
- Error codes or indicators related to water level issues
- Washing machine not advancing to the next cycle due to incorrect water level detection
Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.
This OEM LG part is also compatible with Sears/Kenmore washing machine models.
Do-It-Yourself Stories from Customers like You
LG washing machine would not shut off cold water during rinse cycle Richard W. • Denton , TX • May 22, 2018
Conducted research on web, and via direct contact with AppliancePros where a diagnosis of replacing the water inlet valve and cleaning the sensor tube would "most probably" (80%) handle the issue. The remaining uncertainty would reside in the electronic board circuitry. The price of replacing the water inlet valve was half of a local repair call just to diagnose the issue so I decided to have faith in the odds presented to me. The part arrived on time, and using AppliancePros advice and...
Read more
More
$62.95
- Compare At:
-
$74.91
- You Save:
-
$11.96
Genuine Lg part
By: Lg
Part Number: 5215ER2002G
The Drain Hose Assembly is an OEM part for LG washing machines. It is a component designed to transport used water from the washer to the drain. This flexible hose assembly ensures that water flows smoothly out of your washing machine after each cycle, preventing leaks and maintaining the efficiency of your appliance.
Causes for replacement can include wear and tear over time, clogs from lint or small items, kinks that restrict water flow, or damage from moving or improper installation.
Symptoms of a bad Drain Hose Assembly include:
- Water leaking from the back or bottom of the washing machine
- Difficulty draining water out of the washer
- Puddles of water forming around the appliance during or after operation
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drain hose was leaking on my lg washing machine Terry O. • Temecula , CA • June 12, 2014
I found a video, by another parts vendor, that showed in detail how to dismantle and repair the washer. I wouldn't have known how to even get to the problem without that repair video. Dismantling the washer was easy once I knew how, but would have been like a (litteral) Chinese puzzle without the video. Once I had cracked open the machine and identified the problem, the repair was easy.
I ordered from Appliance Parts Pros because they offered next-day delivery of parts. I had the washer back...
Read more
More
$34.54
- Compare At:
-
$41.10
- You Save:
-
$6.56
Genuine Lg part
By: Lg
Part Number: 4738ER1002A
The Tub to Pump Hose is an OEM replacement part for LG top-load washing machines. This hose safely transports water between the wash tub and drain pump. The hose measures 13 inches in length.
Causes of failure relate to constant flexing under water pressure strains that accumulate over years of usage. Excess minerals in hard water areas promote accelerated breakdown of flexible PVC material.
Symptoms of a cracked or leaking tub to pump hose include:
- Water not draining or taking an abnormally long time
- Water continually accumulating inside the machine cabinet
- Error codes related to drainage issues displayed
- Puddles forming near or under the back of the washer
This genuine LG hose is also compatible with select Sears/Kenmore units as well.
Do-It-Yourself Stories from Customers like You
Tear/hole in the pump hose Chris B. • Lynden , WA • January 12, 2017
First and foremost, much thanks to APP for perfect transaction, and incredible price!
The part was shipped quickly, and arrived fast. Immediate Availability of the part was outstanding, and truly saved this Canadian's day! See, in Canada, LG has their own unfair practice of NOT ALLOWING a Canadian citizen to purchase ANY functional parts for any of their appliances or products... furthermore, in order to get the part for any issue, you must pay directly for an LG direct service tech to come at...
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25
Genuine Lg part
By: Lg
Part Number: 4738ER1004B
The Dispenser Hose is an OEM part for LG washing machines. It connects the detergent dispenser to the washer tub, allowing detergent and other cleaning agents to be delivered effectively during the wash cycle.
Causes of a bad dispenser hose can include regular wear and tear, damage from harsh detergents, or physical damage due to kinks, pinches, or impact. Over time, the hose can become brittle, cracked, or clogged, affecting its ability to function properly.
Symptoms of a bad dispenser hose include:
- Leaks or drips from the hose area
- Detergent not dispensing correctly or at all
- Water pooling around the washer
- Visible cracks or splits in the hose
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
It was leaking quite a bit out of the bottom sides and back between the washer and accessory shelf (front loader on top of lg shelf unit) Benjamin M. • Lynchburg , VA • December 12, 2015
****** always make sure the unit is fully unplugged from the power before you do anything with the outside of the unit to work inside of the unit and while you are working inside the unit... Also make sure that you turn the hot and cold water intake valves off and make sure you don't pull too much on the two water intake hoses that lead to your washer because they can leak with too much pressure exerted on either end*******
1. Took top off unit by unscrewing mounting brackets at two similar...
Read more
More
$40.78
- Compare At:
-
$48.53
- You Save:
-
$7.75
Genuine Lg part
By: Lg
Part Number: 5006EA3009B
The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.
You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.
Symptoms of a bad Pulsator Cap include:
- The pulsator becoming loose or dislodged
- Unusual noises during the wash cycle
- Clothes not being cleaned properly
- The washer experiencing imbalance issues
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Was flashing an ( ue ) uneven code Carl A. • Cleveland , OH • March 15, 2016
We had a repair man come and tell us the needed repair at the cost of 70.00
I ordered the parts and saved money.
Read more
More
$44.71
- Compare At:
-
$53.20
- You Save:
-
$8.49
Genuine Lg part
By: Lg
Part Number: MDS47123608
The Gasket is an OEM part for LG washing machines. This gasket forms a seal between the washer door and the drum, preventing water from leaking during the wash cycle. It is crucial for maintaining the efficiency and cleanliness of the washing process by ensuring a tight seal.
You should replace this gasket if it becomes damaged or worn out. Causes of a bad gasket include wear and tear from regular use, exposure to harsh detergents or cleaning chemicals, mold or mildew buildup, or physical damage such as cuts or tears. Keeping the gasket in good condition is essential for preventing leaks and ensuring optimal washer performance.
Symptoms of a bad gasket include:
- Water leaking from the door during the wash cycle
- Visible mold or mildew on the gasket
- Cracks, cuts, or other damage to the gasket
- Difficulty in closing the washer door securely
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
LG front load washer door gasket needed replacement due to mold buildup Howard F. • Port Orange , FL • April 15, 2020
If you have an older model WM8000H_A you MUST pay attention to the type of door gasket (boot seal) that it uses. Every video I could find for replacing the seal on the WM8000HWA involved a different product than what was required for our specific washer. I wound up getting the wrong one by ordering it without help and had to exchange it - after I had the machine taken apart. Thanks to AppliancePartsPros I got the correct seal and front retaining ring the next day.
NOTE! The retaining rings are...
Read more
More
$109.95
- Compare At:
-
$130.84
- You Save:
-
$20.89
Genuine Lg part
By: Lg
Part Number: AEM73732901
The Drain Hose is an OEM part for LG washing machines. This hose is essential for directing used water out of the washing machine and into the household drain system, ensuring efficient water removal after each wash cycle. The hose measures 67.5 inches in length.
Causes of a bad drain hose can include wear and tear from repeated use, blockages from debris or lint, or physical damage such as cracks or splits. A compromised drain hose can lead to water leakage, improper drainage, or even flooding.
Symptoms of a bad Drain Hose include:
- Water not draining properly from the washing machine
- Leaks or puddles of water around the washing machine
- Visible cracks or splits in the hose
- Unusual sounds during the draining process
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Washing machine drain hose leak Kenneth D. • Wimberley , TX • August 21, 2014
My granddaughter removed the old hose and installed the new hose I had ordered.
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Popular Kenmore Elite Washer Models