Kenmore / Sears Refrigerator Support Parts

The Crisper Drawer Cover Support is an OEM part for LG refrigerators. This support piece holds the crisper drawer cover in place, providing stability and ensuring that the drawer functions correctly. It helps to maintain the integrity of the crisper drawer structure, allowing for smooth opening and closing while keeping fruits and vegetables fresh.

Over time, the crisper drawer cover support can become damaged due to regular use, heavy loading, or accidental impact. If the support breaks or wears out, it can lead to misalignment or difficulty in operating the crisper drawer.

Symptoms of a bad crisper drawer cover support include:

• The crisper drawer cover not staying in place
•  Difficulty opening or closing the crisper drawer
• The drawer feeling loose or unstable
• Cracks or visible damage to the support piece

This OEM LG part is also compatible with Sears/Kenmore models.

This door closer plate is a hinge component that helps your refrigerator door swing closed and seal properly. Replacing a worn plate restores smooth door action and supports a reliable seal to help maintain interior temperatures.

• Guides the hinge/cam for self-closing action and a consistent door stop
• Helps the door close fully and stay shut to protect the gasket seal
• Common symptoms include clicking/grinding at the hinge, door drifting open, or misalignment
• A weak seal from incomplete closing can contribute to frost or condensation

• Unplug the refrigerator; turn off the water supply
• Remove items from the door and support the door to prevent strain on the hinge
• Remove hinge cover and fasteners, separate the hinge as directed by your manual, and replace the closer plate; align with the mating cam
• Reassemble, level/align the door, and verify smooth closing and gasket contact

This dispenser lever holder is the mounting bracket behind the refrigerator's dispenser paddle. It supports and aligns the lever and switch so water or ice dispenses reliably when the paddle is pressed.

• Holds and guides the dispenser lever and actuator switch inside the dispenser housing
• Provides a secure pivot point for smooth paddle movement
• Helps ensure consistent activation of water and ice dispensing
• Damage can cause a loose or stuck paddle, intermittent dispensing, or no dispense

• Disconnect power and shut off the water supply before servicing
• Remove the dispenser panel/escutcheon to access the lever assembly; note part orientation
• Transfer the lever, switch, and return spring to the new holder and secure with the original fasteners
• Restore power/water and test dispensing before reinstalling trim

Front plate restores the appliance's front-facing cabinet, protecting internal components and improving appearance. It replaces cracked, dented or worn front trim so the appliance looks finished and covers internal parts. What it does:

• Covers and protects internal components behind the appliance's front cabinet.
• Restores cosmetic appearance when the existing front is dented, cracked, or scratched.
• Helps maintain proper fit and alignment of adjacent trim and access points.
• Reduces exposure of internal components to dust and incidental contact.

• Always disconnect power (and water, if applicable) before beginning work.
• Removal typically requires removing fasteners, clips or adjacent trim panels—keep track of all screws.
• Handle carefully; edges may be sharp and panels can be awkward to position alone.

This baffle plate secures internal panels and helps position or shield components for proper airflow and operation. It replaces a worn or damaged bracket to restore stable mounting and reduce vibration or rattling. What it does:

• Secures internal panels or assemblies to prevent movement and noise
• Helps direct or protect airflow paths around internal components
• Reduces rattling, vibration, and intermittent contact caused by loose parts
• Commonly replaced when a panel is cracked, bent, or no longer holds fasteners

• Disconnect power to the appliance before beginning any repairs
• Inspect surrounding fasteners and mounting points; replace any stripped or damaged screws
• Reuse existing hardware only if in good condition; use manufacturer-recommended fasteners when available

The Refrigerator Support Gasket is essential for maintaining the efficiency of your Samsung refrigerator. This genuine OEM part ensures a perfect seal, helping to keep cold air inside and warm air out. By replacing a worn or damaged gasket, you can improve your refrigeratorGÇÖs performance and reduce energy consumption. The support gasket is specifically designed to fit a variety of Samsung refrigerator models, ensuring a seamless and secure installation. Its durable construction provides long-lasting protection against leaks and drafts, enhancing the overall functionality of your appliance. Installing the Refrigerator Support Gasket is straightforward, allowing you to quickly restore your fridgeGÇÖs optimal operation without the need for professional help. Trust this genuine OEM part to deliver reliable performance and extend the life of your Samsung refrigerator, providing you with a better and more efficient cooling experience.

The Refrigerator Door Switch Plate is an essential component for maintaining the functionality of your refrigerator. This genuine OEM part ensures reliable performance by accurately detecting when the refrigerator door is open or closed. Crafted with high-quality materials, it provides durability and long-lasting service. The switch plate is easy to install, allowing you to replace a faulty or damaged part without hassle. By ensuring proper door operation, this part helps maintain the optimal temperature inside your fridge and prevents energy waste. Additionally, it controls the interior lighting, turning it on when the door is open and off when closed, enhancing your user experience. Designed to be compatible with a variety of Samsung refrigerator models, the Refrigerator Door Switch Plate guarantees a secure fit and seamless integration. Whether your original switch plate is worn out or no longer functioning correctly, this genuine OEM part is the perfect solution to restore your refrigeratorGÇÖs efficiency and performance.

The Support Bracket is an OEM part for Whirlpool refrigerators. It is an integral structural component that provides support for internal refrigerator shelves and bins. 

Causes of a bad support bracket can include cracks or fractures from long-term use and vibration, broken mounting points no longer firmly attaching it to the wall, or deformation preventing shelves from sitting correctly.

Symptoms of a bad support bracket include:

• Sagging or collapsed refrigerator shelves  
• Items falling off shelves or bins frequently
• Difficulty removing or replacing shelves smoothly

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tapping plate secures the mullion/vertical trim on a refrigerator, restoring a solid mount and proper door alignment. It replaces a damaged or missing mounting plate to reduce trim movement and help maintain a tight door seal. What it does:

• Provides a screw-ready mounting surface for the refrigerator mullion/trim
• Helps keep the mullion firmly in place to prevent wobble or rattling
• Restores proper mullion alignment that can affect door fit and sealing
• Addresses symptoms like loose or shifting mullion trim and uneven door gaps

• Disconnect power and empty doors as needed before working on the mullion area
• Align plate with the mullion mounting area and secure with appropriate screws
• Use hand tools and wear gloves to protect hands from sharp edges

Includes both right and left hand sides.