Kitchenaid Baffle Parts

Note: This part is a kit of 3 baffles. For 1 baffle, order part# WP8182233. For baffle mounting screw, order part# WPY706189.

The Front Load Washer Drum Baffle Kit is an OEM part for Whirlpool washing machines. This kit includes the drum baffles, which are responsible for lifting and moving clothes within the drum during the wash cycle. This ensures that clothes are thoroughly cleaned by enhancing the tumbling action.

Causes of a bad drum baffle can include wear and tear over time, accidental damage from foreign objects left in the wash, or repeated exposure to heavy loads. These factors can lead to the baffles becoming loose or broken, reducing their effectiveness.

Symptoms of a bad drum baffle include:

• Clothes not tumbling properly
• Excessive noise during the wash cycle
• Visible damage or looseness in the baffles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Includes 3 baffles. For single baffle only use part number WP8182233. The mounting screw is part number WPY706189.

Note: This part is 1 baffle. For a kit of 3 baffles, order part# 285976. For baffle screw, order part# WPY706189.

The Front Load Washer Drum Baffle is an OEM part for Whirlpool front-loading washing machines. This component plays a crucial role in directing water flow and distributing it evenly throughout the wash drum during the washing cycle.

Over time, the drum baffle can become worn or damaged due to the constant exposure to water, detergents, and the repeated impact of clothes during the wash cycles. This can lead to inefficient water distribution, reduced cleaning performance, and increased noise levels.

Symptoms of a bad drum baffle include:

• Uneven or incomplete cleaning of clothes
• Tangling or balling up of clothes during the wash cycle
• Excessive vibrations or loud noises during the wash cycle
• Water leaks or improper drainage

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Drum Baffle is an OEM replacement part designed for Whirlpool dryers. The baffle, located inside the drum, helps lift and tumble clothes during the drying cycle, ensuring even and efficient drying. It agitates the clothing, allowing air to circulate freely and preventing tangling.

Note: This is the tall baffle.

Over time, the drum baffle can become loose or damaged due to frequent use and contact with clothing or objects left in pockets. Physical wear or repeated impacts might cause it to crack, detach, or warp, reducing its ability to tumble clothes properly.

Symptoms of a faulty Drum Baffle include:

• Clothes not drying evenly or efficiently
• Unusual noises coming from the drum, such as rattling or banging
• Loose or detached baffle within the drum

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Short baffle

Replacement drum baffle that lifts and tumbles clothes inside the dryer for more even drying and helps prevent garments from snagging. Restores proper drum agitation to reduce noise and improve drying performance. What it does:

• Lifts and separates clothes as the drum turns to promote even heat exposure and drying.
• Helps keep items from bunching or wrapping around the drum, which can cause uneven drying.
• Reduces rattling, thumping, or scraping noises tied to a loose or damaged lifter.
• Protects fabrics from snagging or rubbing against the drum surface.

• Disconnect power to the appliance before beginning service to avoid shock or injury.
• Access may require removing the dryer front panel or drum.
• Keep fasteners and mounting tabs aligned during reassembly to ensure the baffle seats correctly.

This drum baffle restores proper tumbling by lifting and separating laundry as the dryer drum rotates. It helps improve drying performance and reduces garment bunching. What it does:

• Lifts and tumbles clothes so air flows more evenly through the load
• Helps prevent garments from clumping or wrapping around the drum
• Can reduce rubbing, thumping, or scraping noises caused by a loose or damaged lifter
• Restores consistent drum contact and improves drying efficiency

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires opening the dryer cabinet or front panel; small tools may be needed
• Align the baffle with factory mounting holes and secure with existing fasteners; use correct screws if replacements are required
• Inspect and replace worn drum or support parts as needed for reliable operation

This burner baffle directs heat and flame away from sensitive components to help maintain even cooking and protect the range's internal parts. It's a direct-replacement trim piece used on compatible gas ranges and cooktops. What it does:

• Shields and redirects burner flame to reduce hot spots and protect nearby components
• Helps maintain more consistent surface temperatures during use
• Prevents flame impingement on adjacent parts that can cause discoloration or premature wear
• Supports proper burner operation by holding components in correct alignment

• One burner baffle

• Disconnect power and shut off the gas supply before starting work; allow all components to cool
• Basic hand tools are typically required; handle the baffle carefully to avoid bending or scratching
• Verify correct fit and orientation from the parts diagram before final reassembly

This heat deflector routes hot air inside the dryer cabinet to ensure proper airflow and heating performance. It helps maintain even drying and prevents hot spots that can reduce drying efficiency. What it does:

• Directs and channels heated air to the drum and exhaust pathways
• Helps maintain even drying and consistent heat distribution
• Can prevent localized overheating or restricted airflow when damaged
• Commonly replaced when dryer has uneven drying or internal airflow obstructions

• Disconnect power (unplug electric or shut off gas and unplug) before starting any repair
• Typically mounted with screws; basic hand tools (screwdriver/socket) are usually required
• Inspect surrounding seals and ducts for damage while replacing the deflector
• Handle carefully—edges may be sharp and panels can be fragile