Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kitchenaid Belt

Best Seller
Kitchenaid Dryer Drum Belt 92-1/4" 4-Rib
Genuine Whirlpool part
By: Whirlpool
Part Number: 341241

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

  • Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
  • Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
  • Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

Problem How the belt solves it
Drum won’t turn Transfers motor rotation to drum
Loud squealing / thumping Replaces stretched or frayed belt
Burning-rubber smell New belt stops slippage & heat build-up
Damp clothes / long cycles Restores correct drum speed & airflow


DIY install — about 15 minutes

  1. Unplug dryer; remove lint screen housing & front panel.
  2. Release belt tension at idler pulley; lift drum slightly to slide old belt off.
  3. Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
  4. Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

This part fixes the following symptoms
  • Heat stays on after drum has stopped
  • Will not tumble
  • Touchpad does not respond
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Broken dryer belt   Bob B. • St Louis , MO • September 12, 2015

Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back... Read more

More
$14.64
Compare At:
$17.42
You Save:
$2.78

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Kitchenaid Whirlpool Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: 661570V

The Drive Belt is an OEM replacement part for Whirlpool dryers. This essential component is responsible for transferring power from the dryer's motor to the drum, allowing it to spin and tumble the clothes during the drying cycle.

Symptoms of needing to replace the drive belt include:

  • The dryer drum not spinning or rotating
  • Loud squeaking or grinding noises during the drying cycle
  • Excessive vibration or shaking from the dryer
  • Clothes taking longer to dry or remaining damp

Causes of a faulty drive belt can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You I had no error code, it is just that when you press start you would hear a click and no actions.   Nicholas M. • Miami , FL • June 12, 2020

It was the day of my birthday June 6th when my wife came to me to tell me that the dryer was not working. Immediately I started to look for a new dryer from Best Buy and the rest. Then I said It would be better if I waited for 4th of July at which time I could find a better deal. This is when I decided to take it apart to see what was wrong. Initially, I thought of the belt that could be broken and I rotated the drum by hand and I heard a noise of the belt at times falling on the drum. I was... Read more

More
$39.29
Compare At:
$47.15
You Save:
$7.86

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Kitchenaid Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10388414

The Drive Belt is an OEM part for Whirlpool front load washing machines. It transmits power from the wash motor to rotate the tub assembly, tumbling clothes during cycles. The belt is designed with deep grooves to securely grip the motor and tub pulleys. It measures 48.22” long uninstalled and will stretch to 51.53” when installed.

Causes of a bad Drive Belt can include cracks developing from repeated flexing during operation or stretching over many years. Debris trapped in the belt path can also wear down the belt prematurely.

Symptoms of a bad belt include:

  • The washing tub failing to spin or agitate clothes
  • Abnormally loud squealing noises from inside the machine
  • The belt slipping off pulleys during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, and select Kenmore front load washers.

This part fixes the following symptoms
  • Burning smell
  • Will not agitate
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Drum not turning   Paul H. • Seattle , WA • December 13, 2019

I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive... Read more

More
$55.95
Compare At:
$66.58
You Save:
$10.63

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Kitchenaid Dryer Belt (Length 79-1/8 Inch)
Genuine Whirlpool part
By: Whirlpool
Part Number: 3394652

The Dryer Belt (length 79-1/8 inches) is an OEM part for Whirlpool dryers. This belt wraps around the drum, the motor pulley, and the idler pulley to enable the drum to rotate during the drying cycle. It ensures that clothes are tumbled and dried evenly. Also available in repair kit AP3109603

Over time, the dryer belt can become worn or snap due to the constant tension and friction it endures. When the belt fails, the drum will no longer spin, and the dryer will be unable to dry clothes effectively.

Symptoms of a bad dryer belt include:

  • The dryer drum not turning
  • A burning smell from the dryer
  • Unusual noises during operation
  • The dryer running but not tumbling clothes

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn heat worked fine   Charles K. • Pittsfield , MA • March 03, 2019

I used the web site to figure out the most likely causes for the drum not turning. I watched the web site's videos to see what I would have to do and thought it wasn't too bad; something a rookie could do. Ordered the parts (belt and idler arm) and followed the directions from the videos. Mostly a bunch of screws/bolts to remove with a couple in difficult places. (my dryer isn't full sized) There were some electrical connections to take apart. As i disassembled it, I took pictures of where... Read more

More
$46.95
Compare At:
$55.40
You Save:
$8.45

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Looking for KitchenAid belt replacement parts? KitchenAid appliances are central to many kitchens, whether you're making breakfast or creating a culinary masterpiece. The KitchenAid belt, a critical component, ensures smooth power transfer within your machine. When wear and tear occur, having durable KitchenAid parts is key to maintaining peak performance.

KitchenAid belt replacement parts are designed specifically for your appliance, ensuring a snug fit and reliable operation. Using OEM (Original Equipment Manufacturer) parts guarantees quality and compatibility, reducing the likelihood of further issues. These precisely engineered belts enable efficient mixing, blending, or grinding, keeping your kitchen running smoothly.

If your appliance needs some care, don't worry. Reliable and high-quality KitchenAid belt replacement parts are readily available, making it easy to restore your kitchen equipment to perfect working order.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store