Kitchenaid Glass Top Or Cook Top

Black

Color: Black

The Cooktop is an OEM part for Whirlpool ranges. It is the glass surface that is used for warming and cooking food. This cooktop features multiple warming zones with varying heat levels to accommodate different types of cooking needs. It has a smooth glass design that is easy to clean.

Causes can be general wear and tear from frequent use. Accidental impacts or stresses from heavy cookware can also damage the cooktop.

Symptoms of a bad cooktop include:

• Zones not heating up properly or uneven heating
• Cracks or breaks in the glass surface
• Dirty burners that leave residue
• Warping or discoloration of the glass over time

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Cooktop is an OEM part for Whirlpool ranges. It provides a flat cooking surface for use with gas or electric burners.  

Symptoms of a bad cooktop include:

• Burners that do not heat or bake properly  
• Visible cracks or chips in the cooktop surface
• Warping or malformation of the cooktop panel
• Areas that cannot be cleaned thoroughly

Causes of a bad cooktop can be regular wear and deterioration over time from constant heat exposure, accidental damage from pans or cookware, or untreated spills.

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Black

This smooth glass cooktop surface replaces a cracked, chipped or worn cooktop to restore a flat, easy-to-clean cooking area and proper support for burners. It returns the cooktop to safe, usable condition. What it does:

• Replaces the damaged glass surface that covers the burner openings and supports cookware
• Restores a smooth, wipe-clean finish for easier cleanup and improved appearance
• Prevents debris from falling into burner areas and helps maintain proper heat contact
• Common symptom: visible cracks, chips, deep scratches, or uneven surface that affect use

• Disconnect power to the range before starting any repair to avoid electrical shock.
• Handle glass carefully — use gloves and eye protection to avoid cuts from sharp edges.
• Installation may require lifting the cooktop into place and securing screws or clips; verify fit before final fastening.

Color: Black

This part is a replacement cooktop. This part can be used to replace a broken or defective cooktop in a variety of range models. The cooktop must be in proper working order to ensure that the user has a stable and safe surface on which to cook and use cookware. If the cooktop is in any way cracked, broken, or faulty, it should be replaced as soon as possible. Always disconnect power from the appliance before starting any work or repairs. It is recommended that work gloves are worn to protect the hands.This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. As an authentic replacement part, this cooktop is suitable for use on ranges that have been manufactured by Whirlpool, Kitchenaid, Maytag, Amana, and some other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This cooktop glass surface is the smooth top replacement that restores a clean, even cooking area and holds burners and controls in place. It helps maintain safe, efficient stove operation and a finished look for the range. What it does

• Provides the finished glass cooking surface that supports burners and control components.
• Restores a sealed, easy-to-clean area for normal cooking use.
• Common replacement for cracked, chipped or heavily scratched tops that affect appearance or function.
• Helps prevent food and spills from reaching internal components when intact.

• Disconnect power (and gas if applicable) to the appliance before starting work.
• Handle the glass carefully—use gloves and eye protection to avoid cuts from edges or broken pieces.
• Installation may require removing burners, controls, and trim; keep screws and small parts organized.

This is a replacement cooktop top assembly that restores the cook surface and burner layout on compatible Whirlpool ranges. It replaces a damaged, cracked, or worn cooktop so you can safely resume normal cooking. What it does:

• Provides the finished cook surface and mounting for burners and controls
• Replaces cracked, warped, or cosmetically damaged cooktop tops
• Restores proper alignment and fit of burners and grates
• Helps eliminate steam or food intrusion from damaged surfaces

• Installation may require removing the range from its cavity and disconnecting power; disconnect electrical supply before servicing
• Handle the top carefully to avoid scratching or chipping; two people may be needed for safe handling
• Use manufacturer-recommended fasteners and follow OEM alignment references
• If replacing gas or electrical components attached to the top, verify seals and connections per OEM instructions

This glass cooktop surface replaces a cracked, chipped or worn cooktop to restore a smooth, easy-to-clean cooking area and proper support for burners and controls. Durable glass gives a finished look and reliable performance. What it does:

• Replaces damaged or broken cooktop glass to restore a safe, flat cooking surface
• Provides a smooth, easy-to-clean surface that resists stains and spills
• Supports burners and control components for proper alignment and operation
• Helps eliminate rattling or uneven cookware contact caused by warped or cracked tops

• One cooktop glass assembly

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle glass carefully; wear cut-resistant gloves and eye protection to prevent injury
• Follow OEM diagram for correct alignment, fastener sequence and seal placement

This is the cooktop top panel that provides the durable surface and mounting area for burners and controls, restoring proper function and appearance to your range. It replaces a cracked, scratched, or damaged cooktop surface so you can use your range safely. What it does:

• Re-establishes a flat, stable surface for burners, grates, and cookware
• Protects internal components from spills and debris
• Helps maintain correct burner alignment and appearance
• Addresses visible damage such as cracks, chips, deep scratches, or warping

• Disconnect power (and gas, if applicable) before starting any repair
• Follow factory service manual instructions for removal and reinstallation to avoid damage
• Use proper support and two-person lifting for large or heavy panels to prevent breakage or injury
• If glass or ceramic, handle with care and replace any damaged mounting hardware or gaskets

This is a glass main cooktop intended for use with stoves. It is the main component associated with holding cookware while meals are heated on the appliance. It is a protective glass cooktop that sits over many internal components of the stove, such as the heating elements. The glass main cooktop can be damaged, cracked, or scratched and require replacement.If there are large scratches, areas of damage, or the glass main cooktop has shattered, it will need to be replaced. Before doing so, the oven will need to be unplugged from the wall socket. A set of tools and work gloves will be needed during the process. The gloves will prevent injuries working with broken glass. To replace the glass main cooktop, open the oven door and unscrew the part from the stove. Take it up and disconnect the interior parts. Install the new part and turn back on power to the appliance.The glass main cooktop is compatible with ranges, stoves, and ovens made by KitchenAid. The part is sold on an individual basis. It is an authentic OEM replacement part that is directly sourced from the manufacturer.

This black cooktop is the top panel of the range. It forms the cooking surface and supports the surface burners, restoring a clean look and secure burner alignment when the original top is chipped, dented, or damaged.

• Serves as the main cooking surface and mounting platform for surface burners and related components
• Helps contain spills and shields internal components from heat and debris
• Corrects issues like warped or dented tops that cause burners to rock or sit unevenly
• Refreshes appearance when enamel is heavily chipped, scratched, or rusted

• Disconnect power and, if applicable, shut off gas supply before servicing
• Remove grates, burner caps, and burner heads; retain all screws and hardware
• Lift off the old top; transfer any brackets, insulation, and screws from the original top as required
• Reassemble carefully; check for leaks on gas models

Replacement cooktop surface assembly that restores the top of the range for safe, even cooking and a finished appearance. Use this part to replace cracked, warped, or cosmetically damaged cooktop tops. What it does:

• Replaces the cooktop surface so burners and grates seat correctly and cookware sits level.
• Protects internal components from spills, debris, and heat exposure.
• Stops visible cracks, chips, or warping that can cause smoke or poor burner contact.
• Restores the appliance's finished look and makes cleaning easier.

• Disconnect power (and shut off gas for gas ranges) before starting any work.
• Remove grates, burners, and knobs as needed; handle the surface carefully to avoid cuts or additional breakage.
• Some installations require two people due to size and weight—use proper lifting techniques.
• Follow the manufacturer's installation instructions.

Replacement cooktop top panel that restores the range's cooking surface and provides a sturdy mounting surface for burners and controls. Ideal when the original top is dented, rusted, cracked, or cosmetically worn. What it does:

• Replaces a damaged or corroded cooktop top to restore appearance and structural support
• Provides the proper mounting surface and alignment for burners, grates, and control components
• Helps eliminate gaps or uneven seating caused by a warped or dented top
• Preserves factory attachment points and finish for a correct fit

• Disconnect power and shut off gas supply before starting any repair
• Remove burner grates, burners, and control assemblies as required to access mounting screws
• Use appropriate hand tools and keep track of screws and brackets; some fasteners may be reused
• Wear gloves and take care handling edges; refer for model-specific instructions