Kitchenaid Range Burner & Related Parts

Burner head that distributes gas evenly across the burner. Replace if cracked, clogged, or corroded to restore proper flame distribution on your gas cooktop.

This LP conversion kit includes the orifice spuds and components needed to convert a natural gas cooktop to liquid propane (LP) gas. The kit replaces the existing burner orifices with ones sized for LP fuel pressure. Use this kit when switching your gas supply type or if you purchased a natural gas unit but need it to run on propane.

This LP conversion kit includes a set of surface burner orifice spuds designed to convert your range from natural gas to liquid propane operation. The orifices regulate the flow of LP gas to each surface burner, ensuring a proper flame size and safe combustion. You need this kit when switching your gas range to propane fuel, such as when moving to a location without a natural gas supply.

Burner head for gas range cooktop. Installs beneath cooking surface to distribute flame evenly. Replace if cracked, clogged, or damaged from wear.

Burner head sits on the base and distributes gas through precision ports for even flame. Replace if cracked, clogged, or corroded for proper ignition.

Replace your gas cooktop burner head if it's clogged, scorched, or worn. This part distributes gas through precision ports for even flame distribution.

Complete burner cap kit for gas cooktops. Sits atop sealed burners to distribute flames evenly. Replace cracked, warped, or discolored caps from heat wear.

This is the base component of a surface burner on a gas or electric range cooktop. It sits on the cooktop and distributes heat evenly for cooking. Replace this burner base if you notice uneven flame patterns, visible damage or warping, or if the burner cap no longer seats properly.

6,000 BTU. Color: Coal matte black. Measures about 2 inches in diameter.

Secures the gas orifice beneath your cooktop and routes gas to the burner head. Replace if cracked, damaged, or missing to restore proper alignment.

Orifice holder mounts beneath the surface burner, securing the orifice spud and directing gas flow. Replace if cracked, damaged, or loose to restore fit.

Controls gas flow and pressure to burners and oven in gas ranges. Replace if leaking, cracked, or damaged to restore safe gas distribution.

This orifice spud meters gas to the burner for a consistent, correctly sized flame. Replace a clogged or damaged spud to restore proper burner output and reliable ignition on your gas cooktop or range.

• Controls and meters gas flow through a calibrated opening to the burner
• Helps ensure proper flame size and color when matched to the correct burner and fuel type
• Common symptoms of a failing or clogged spud: weak or uneven flame, yellow tipping, or delayed ignition
• Damaged threads or a stripped orifice can prevent correct sealing and fuel delivery

• Shut off gas supply and disconnect power; allow the appliance to cool
• Access the orifice holder/manifold for the affected burner; remove the old spud with an appropriate orifice wrench or nut driver
• Start the new spud by hand to avoid cross-threading; tighten snugly—do not overtighten brass threads
• Restore gas and check for leaks with an approved leak-detection solution; verify flame quality and adjust per the service manual

Sits atop the burner head to shape flame and shield from spills. Replace if missing, chipped, or warped to restore proper flame pattern and appearance.

Pressure regulator for gas ranges and cooktops. Mounts to the gas supply line to control flow to burners. Replace if cracked, leaking, or missing.

Replacement burner head for gas cooktops. Distributes gas evenly through flame ports. Replace if damaged, clogged, corroded, or missing to restore burner.