Kitchenaid Refrigerator Drawer, Shelf, Pan

This replacement rail mounts inside your appliance to support or retain a bin, drawer, rack, or shelf. Replacing a cracked or missing rail restores proper alignment, secure fit, and smooth operation.

• Supports and retains the mating bin, drawer, rack, or shelf in the correct position
• Helps keep components level and aligned to prevent binding, popping off, or spills
• Provides stable guidance or stop points so parts move and seat properly
• Typical symptoms: wobble or sagging, difficulty opening/closing, parts falling out, visible cracks or broken tabs on the rail

• Disconnect power before servicing; remove items from the affected area
• Remove the drawer/bin/rack, then release locking tabs or screws to take out the damaged rail
• Transfer any reusable clips or end caps from the old rail, align, and secure the new rail; test movement before reloading

Replacement crisper pan for refrigerators that provides a flat, removable surface to hold fruits and vegetables and helps contain spills for easier cleaning and storage. What it does

• Holds produce and other refrigerated items securely in the crisper compartment.
• Contains spills and drips to protect the compartment below.
• Helps restore usable storage when the original pan is cracked, broken, or missing.
• Reduces mess and makes drawer cleaning faster.

• Remove all food from the crisper drawer before replacing the pan.
• Slide the old pan out, wipe the compartment clean, then position and slide the new pan into place.
• Most replacements are straightforward and require no tools; if the pan does not seat properly, check the refrigerator's parts diagram.

This track pan replaces the damaged or worn snack/deli drawer pan so food stays contained and organized inside the refrigerator. It restores proper sliding and helps prevent spills and food contamination. What it does:

• Provides a shallow sliding pan for deli, snack or small-item storage
• Supports smooth in-and-out sliding of the drawer and helps keep contents contained
• Replaces cracked, warped, or broken pans that cause sticking or spills
• Helps maintain an organized refrigerator interior and makes cleaning easier

• One track pan

• Disconnect power to the appliance before beginning any work
• Empty and remove the existing drawer and pan before installing the replacement
• Slide the new pan into the same track position until it seats; verify smooth operation
• If the track or mounting hardware is damaged, replace those parts as well.

This cantilever door shelf bin mounts on the refrigerator's inner door rails to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore organized storage and keep items secure and easy to reach.

• Attaches to the door's cantilever mounting rails to support frequently used items
• Allows adjustable placement along the door within designated rail positions
• Helps prevent tipping and spills when opening or closing the door
• Common signs it's time to replace: cracked bin, broken hooks/tabs, won't stay seated, or missing bin

• Remove contents; lift the old bin straight up to disengage from the rails
• Align the new bin's hooks over the door rails and press down until fully seated
• Use only in compatible rail slots; do not force into place
• Handle plastic carefully and avoid overloading initially

This shelf support stud secures a refrigerator shelf or rail to the liner wall, restoring proper support so shelves sit level and stay in place during everyday use.

• Provides a stable mounting point for the shelf/rail in the cabinet wall
• Helps correct a sagging, loose, or uneven shelf
• Replaces a broken, stripped, or missing stud
• Helps prevent shelves from slipping or falling when loaded

• Unplug refrigerator and wear cut-resistant gloves
• Remove the shelf/rail to access the mounting point
• Install the new stud fully seated and aligned before reinstalling the shelf
• Do not overtighten or force; replace any damaged mating parts for a secure fit

Replace a damaged or missing freezer basket to restore organized, easy-access storage in your freezer compartment. This basket keeps items contained and properly positioned to support airflow and make loading and retrieval easier.

• Holds and organizes frozen items within the freezer compartment
• Seats on designated rails or locator tabs for secure, level placement
• Helps maintain airflow around stored packages
• Common symptoms: cracked, bent, or broken basket; won't sit level; or missing

• Empty the freezer area and remove the existing basket
• Align the new basket with the rails or locator tabs and lower into place—do not force
• Usually no tools required
• Wear gloves to protect hands from cold surfaces and sharp edges

The Utility Pan is an OEM part for Whirlpool refrigerators. It is responsible for providing additional storage space in the refrigerator through a sliding drawer.

The utility pan is designed with smooth roller glides to allow for easy and quiet opening and closing of the drawer. It provides a flexible storage solution for taller or bulkier items that may not fit elsewhere in the refrigerator.

Causes of a bad utility pan can include worn glides or rollers resulting in difficult opening/closing, or damage to the assembly components themselves through heavy use over time.

Symptoms of a bad utility pan include:

• The drawer failing to fully close or open
• Items inside tipping over due to uneven motion
• Noise or scraping sounds when operating the drawer
• Physical damage or deformation of the assembly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Restore tidy storage in your refrigerator's deli/pantry drawer with this Pantry Drawer Divider. Replacing a cracked or missing divider keeps foods separated and helps the drawer slide and close properly without contents shifting or tipping.

• Separates and stabilizes items within the deli/pantry drawer for better organization
• Helps prevent contents from sliding and causing the drawer to bind
• Restores proper fit when the original divider is cracked, warped, or missing
• Typical symptoms: divider falls out or won't stay positioned; difficulty keeping foods organized

• Disconnect power to the refrigerator and remove items from the deli/pantry drawer
• Fully extend and lift out the drawer as directed in your user manual
• Align the divider with the molded slots/grooves and press or slide into place until secure
• Reinstall the drawer and verify smooth operation; do not force parts

This replacement freezer bin is a molded plastic drawer that restores organized frozen-food storage in the freezer compartment. It replaces cracked, warped or damaged bins so items slide in and out smoothly and stay contained. What it does:

• Provides a dedicated storage drawer for frozen foods and helps keep the freezer organized.
• Slides on freezer rails or guides to allow easy access to contents.
• Replaces bins that are cracked, chipped, cloudy or no longer hold items securely.
• Helps prevent spills and loose items from collecting on freezer shelves or the floor.

• Remove food from the bin and, for safety, unplug the appliance or shut off power to the unit before starting.
• Slide the old bin out, release any retaining tabs or stops, then set the new bin into the tracks and slide until it seats.
• Do not force the bin; if it does not engage smoothly, inspect rails, stops and retainers for damage and clean as needed.
• Wear gloves to protect hands from sharp edges during removal and installation.

This replacement bracket provides a secure mounting point for a designated component in your appliance. It keeps parts properly supported and aligned, helping the unit operate smoothly without vibration or shifting.

• Supports and anchors a specific part or assembly in the correct position
• Helps prevent vibration, rattling, and premature wear from movement
• Maintains alignment for consistent, reliable operation
• Replace if bent, cracked, or missing; symptoms can include loose components or unusual noise

• Disconnect power; shut off water or gas supply if applicable
• Access the bracket location per your model's service information and note the original orientation
• Transfer any screws, clips, or grommets from the old bracket to the new one
• Tighten fasteners evenly and verify alignment before restoring power

This control lever secures a refrigerator door shelf bin to the door frame so bins stay seated and stable during normal use. Replacing a broken or worn lever restores proper bin retention and reduces rattling or unexpected bin release. What it does

• Holds the door shelf/bin in place so it doesn't fall out when opening or closing the door
• Aligns and retains the bin on the door track for secure storage
• Stops bin-related rattles and noisy door operation caused by a loose or cracked lever
• Common symptom: bin falls out, won't stay seated, or rattles in the door

• One door bin control lever

• Remove food and take the door bin off the door before replacing the lever
• Inspect the bin and mounting area for damage; clean mounting surfaces if needed
• Lever typically snaps into the door mounting point; align and press until it clicks
• Disconnecting power is not required for most door-bin repairs, but follow all safety precautions and your model's service instructions

Door shelf bin control lever that secures and releases the refrigerator door shelf bin so stored items stay in place; replaces a broken or worn lever to restore proper bin latching and alignment. What it does:

• Locks the door shelf bin into the door track so the bin stays seated during normal use.
• Allows controlled removal and reinstallation of the door bin when lifted or tilted.
• Common replacement when the bin won't latch, slides out, or the lever is cracked or damaged.
• Matches OEM fit to restore original bin operation and alignment.

• Remove all items from the door bin before servicing; set the bin on a soft surface to avoid damage.
• Inspect bin track and mounting points for damage before installing the new lever.
• Most installations require only basic hand tools and snapping the lever into the existing mounting point.
• Always unplug the refrigerator or disconnect power when working near electrical components or lights.

This refrigerator crisper pan replaces a damaged or missing produce drawer, restoring smooth operation and organized produce storage. It fits the factory rails beneath the crisper cover to keep fruits and vegetables contained and easy to access. What it does:

• Holds and organizes produce in the fresh food compartment
• Slides on the existing drawer rails under the crisper cover
• Restores function when the original pan is cracked, warped, or missing
• Common symptoms: broken corners, difficulty sliding, or the drawer coming off its tracks

• Empty the old drawer; pull straight out and lift to clear the stops
• Align the new pan with the slides and push in evenly—do not force
• If your model uses reusable trim/inserts on this drawer, transfer them from the original
• Handle any glass shelves and cold plastic carefully to avoid damage

This mounting cup installs in the freezer liner to create a secure attachment point for the ice maker or its bracket. It helps keep the assembly stable and properly aligned so the ice maker mounts firmly and operates reliably. What it does:

• Provides the receiving anchor for the ice maker/bracket mounting screw
• Helps hold the ice maker level and reduces movement or vibration
• A worn, stripped, or missing cup can prevent the screw from tightening
• Common signs include a loose or sagging ice maker, rattling, or difficulty keeping the ice maker aligned

• 1 mounting cup

• Disconnect power and shut off the water supply before servicing
• Remove the ice maker to access the cup location
• Seat the cup fully into the liner opening, then reinstall the bracket/ice maker and mounting screw
• Do not overtighten; verify the ice maker sits level and clears the fill tube

Replacement door bin that restores secure storage inside the refrigerator door for bottles, condiments and small items. Ideal when the original bin is cracked, broken, loose or missing and items slide or fall out. What it does:

• Holds and organizes bottles, condiments and small containers to prevent shifting in the door.
• Replaces a cracked, broken or missing door bin that causes items to fall or roll out.
• Snaps into existing door shelf supports to restore stable storage and organization.
• Conservatively restores normal door storage without replacing the entire door assembly.

• Most installs require no tools: remove contents, lift the damaged bin out and snap the replacement into the door shelf supports.
• Remove food and bottles before replacing to avoid spills.
• Wear gloves when handling broken plastic to avoid cuts.

This replacement freezer bin is the removable drawer that stores frozen food and keeps items organized in the freezer compartment. It restores secure storage and easy access when the original bin is cracked, broken, or missing. What it does:

• Holds and organizes frozen food inside the freezer drawer area.
• Slides in and out on the freezer tracks for convenient loading and access.
• Prevents items from falling into lower compartments when installed correctly.
• Commonly replaced when the bin is cracked, warped, or no longer latches securely.

• Empty the freezer section and remove any ice buildup before installing.
• Align the bin with the tracks and slide it in until it seats; do not force.
• Handle carefully to avoid chipping or cracking the plastic edges.