Kitchenaid Refrigerator Tank Or Reservoir

The Reservoir is a Whirlpool OEM replacement part for Whirlpool side-by-side refrigerators. This assembly does include the filter head. The filter head connects the external filter cartridge to the internal reservoir. The reservoir holds filtered water that is dispensed from the external door dispenser.

Causes can be normal wear to sealing components, cracks in plastic from repeated pressure changes, or mineral buildup affecting water flow.

Symptoms of a problem include:

• Prematurely lit filter change indicators
• Water dispenser flow slowing or stopping over time
• Gradual decline in ice production amounts
• Noticeable sediment or particles in dispensed water

It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Some Kenmore models.

The Water Tank Assembly is an OEM part for Whirlpool refrigerators. This assembly stores and supplies water for the refrigerator's water dispenser and ice maker, ensuring a continuous flow of fresh water.

Causes of a bad water tank assembly can include leaks or cracks due to aging, freezing and thawing cycles, or damage from impacts. Additionally, mineral buildup from hard water can clog the tank and affect its performance.

Symptoms of a bad water tank assembly include:

• Water leaks inside the refrigerator
• Reduced water flow from the dispenser
• Ice maker not producing ice
• Unusual tastes or odors in the water

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Water Reservoir is an OEM part for Whirlpool refrigerators. It stores and chills water before it is dispensed through the refrigerator's water dispenser. This component ensures that you have a steady supply of cold water available directly from your fridge.

Common causes of a bad water reservoir include cracks or leaks from regular use, exposure to extreme temperatures, or blockages from mineral deposits.

Symptoms of a bad water reservoir include:

• Water leaks inside the refrigerator
• The water dispenser not dispensing properly
• Unusual tastes or odors in the water
• Visible cracks or damage to the reservoir

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the refrigerator's water reservoir. It stores a small volume of water inside the fresh-food section so the dispenser delivers a steady, chilled supply. Replace a cracked or blocked tank to stop leaks and restore consistent flow. What it does

• Holds and chills water for the dispenser inside the refrigerator
• Helps maintain consistent dispenser flow and pressure
• Common failure signs include leaks or puddling under the crisper drawers
• May also present as little/no water from the dispenser or sputtering/air in the line

• 1 water reservoir

• Disconnect power and shut off the water supply; depress the dispenser paddle to relieve line pressure
• Access is typically behind crisper drawers or a fresh-food compartment cover, depending on model
• Keep towels handy; disconnect push-to-connect fittings and note tube routing/orientation
• After installation, fully seat tubing, restore water, purge air by dispensing several glasses, and check for leaks

The Reservoir is an OEM part for Whirlpool refrigerators. It is designed to store and dispense water within the refrigerator, typically connecting to the water dispenser and ice maker. This reservoir ensures a consistent supply of water, facilitating the production of ice and providing chilled water for consumption.

Causes of a bad reservoir can include mineral buildup from hard water, cracks or leaks due to wear and tear, or contamination from foreign particles.

Symptoms of a bad reservoir include:

• Water leaks inside the refrigerator
• Reduced or no water flow to the dispenser or ice maker
• Odd tastes or odors in the water
• Ice production issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A replacement water reservoir that stores and routes water for the refrigerator dispenser and ice system, restoring proper water flow and stopping leaks from a damaged or cracked reservoir. What it does

• Holds and directs water to the dispenser and ice maker assembly.
• Replaces cracked, damaged or leaking tanks that can cause pooling or drips inside the cabinet.
• Restores proper fill to the ice maker and consistent dispenser flow when the original reservoir is faulty.
• Helps prevent water damage and reduces the chance of contamination from a compromised reservoir.

• Disconnect power and shut off the water supply before any repair.
• Remove interior panels or shelving as required to access the reservoir; follow OEM disassembly steps.
• Handle the reservoir carefully to avoid new cracks; check seals and gaskets during reassembly.

This Drip Tray catches stray drips and condensation from the area it serves, helping keep nearby surfaces dry and tidy. Replacing a cracked or missing tray reduces puddles, staining, and recurring cleanup. What it does:

• Collects drips, splashes, and minor overflows to protect surrounding surfaces
• Helps direct moisture away to reduce puddling and mineral buildup
• Removable design makes routine cleaning quick and easy
• Common symptoms: cracks or warping, discoloration, persistent water around the tray area, or the tray not seating securely

• 1 drip tray

• Disconnect power and turn off water supply before servicing
• Remove the old tray and clean the seating area for proper fit
• Align and fully seat the new tray without forcing
• Restore power/water and monitor initial operation to confirm drips collect properly

This refrigerator water reservoir stores a small volume of water in the fresh food compartment so the dispenser delivers a steady, chilled flow. Replace a cracked or leaking tank to stop interior leaks and restore normal dispensing performance. What it does:

• Holds water for the in-door dispenser between uses
• Lets water cool to refrigerator temperature for consistent dispensing
• Helps maintain steady flow to reduce pulsing at the dispenser
• Common symptoms: leaks inside the fridge, slow or no water from the dispenser, visible cracks/bulges in the tank or connected tubing

• One water reservoir

• Unplug the refrigerator and shut off the household water supply
• Depressurize the line by dispensing water until the flow stops
• Remove shelves/drawers to access the reservoir (typically behind the crisper area)
• Capture residual water, reconnect fittings securely, then restore water/power and check for leaks; purge air by dispensing several glasses of water

The Ice-Container is an OEM part for Whirlpool refrigerators. It is a component that stores ice from the icemaker in the freezer. The ice container is designed to fit seamlessly within the refrigerator, providing a convenient and accessible storage solution for ice.

Causes of a bad Ice-Container include wear and tear over time, or damage to the container or its components due to mishandling or impact. 

Symptoms of a bad Ice-Container include:

• The container cracking or breaking which causes ice to melt prematurely
• Difficulty removing ice cubes from the container 
• Ice spilling out of the container onto the freezer floor
• The container door or lid not closing securely

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Electronic Control Board is an OEM component for Whirlpool washing machines. It governs essential operations like cycle selection, water levels, spin speeds and more.

Causes of a faulty control board can include liquid damage, power surges, or standard component wear over time under regular operation.

Symptoms include:

• Inability to select or change washing cycles 
• Issues with the display, lights or buttons
• The washer failing to fill or spin properly
• Repeated error codes or immovable cycles

This Whirlpool OEM replacement control board restores full and reliable functionality, compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models as well.

The Water Reservoir Tubing is an OEM replacement part for Whirlpool refrigerators. It is a flexible plastic tubing that replaces the water reservoir and holds the water for the ice maker and dispenser.

Causes can include cracks from heat or cold exposure over time, punctures from sharp edges during installation, or deterioration of plastic tubing that impacts integrity.

Symptoms of bad water reservoir tubing include:

• Inaccurate or inconsistent ice production
• Leaks or water spills near the reservoir or ice maker
• Kinks or ruptures in the tubing that obstruct water flow
• Mineral buildup that clogs or restricts the line

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Note: As per manufacture this is no longer a tank. The tank style has been updated with coiled tubing.