Lawn Mower Transmission, Brake & Clutch

In a snowblower, the driveshaft is connected to a part called a worm gear. The worm gear turns the auger blades which eject the snow. The worm gear is connected to the worm shaft, which causes the auger blade to turn rapidly. Eventually, the incredible torque inside the machine, plus the occasional bumps and bruises experienced by the machine in operation and when being stowed, may cause the worm gear to malfunction. When the snowblower is erratic in its operation and fails to remove snow completely, there is a good chance the problem is the worm gear. To replace the worm gear, remove the housing to get to the worm shaft. Remove the entire worm assembly. Next, remove the blower fan and remove the worm gear. Grease the auger assembly before installing the new gear. Reverse the order to reassemble. While the snowblower is disassembled, it's the best time so exam the auger, driveshaft, sheer bolts, and tires for wear. You may find other parts that need to be updated. Make sure to replace the worm bolt and any other necessary parts with a genuine OEM manufactured part such as this one. This gear can be used in a number of snowblowers, including machines made by Yard Machines, Craftsman, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, Ryobi, Montgomery Wards, Huskee, and MTD. Part sold individually.

This pinion gear is an essential part of the steering assembly as it translates the rotation of the steering shaft into vertical motion. The pinion gear travels along the drivetrain, which pushes the wheels either forward or backward, causing the mower to turn. Without a functioning pinion gear, the mower will no longer steer. A pinion gear's teeth can slowly wear away through repeated use, causing it to begin slipping. When this happens, the operator will no longer be able to turn their mower as effectively or possibly not at all. This can be dangerous for the operator and they should stop mowing immediately. With most push lawn mowers, the pinion gear is located inside the wheel well. To replace it, simply remove the wheel and mounting washer, pop off the retaining ring, and remove the pinion. Reassemble and test the forward motion of the wheel. This genuine replacement OEM part is compatible with a number of lawn mowers from Poulan, Jonsered, Husqvarna, and Weed Eater. It comes sourced from the original manufacturer and does not include any additional hardware.

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.

This part is a replacement transmission gear. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. It is intended to replace a defective or broken transmission gear in lawn mowers.The transmission gear is what attaches to the equipment's drive shaft to help turn the wheels. This part is critical to proper equipment functionality and thus will require replacement if faulty in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this transmission gear, the appropriate owner's manual and equipment diagrams should be referred to. This transmission gear is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawn mower models that have been manufactured by Husqvarna, Poulan, and other brands.

The replacement mower arm brake pad is sourced directly from the manufacturer. It is used with lawn tractors and is made from metal with an attached brake pad. The arm connects to the idler arm, which helps the driver of the lawn tractor to control the machine's speed. It is an important part of the machine that needs to be in good condition. However, this part could start to wear out over time, just as would happen with brake pads for other vehicles. This could be due to the normal wear and tear associated with using the tractor, or it could be due to corrosion or breaking. Owners will likely require a wrench when replacing the mower arm brake pad. This is a genuine OEM replacement mower arm brake pad, and it is sold individually. The part is for use specifically with certain makes and models of lawn tractor. It will work with more than 150 different machines. Compatible brands include Husqvarna, Craftsman, Poulan, and Ariens.

This is a genuine OEM clutch assembly sourced directly from the manufacturer; it is used in lawn mowers and lawn tractors to engage the blades. When the gear lever is pulled, the clutch engages. This causes the pulley wheel to spring out and tighten the blades against the turning drive shaft pulley, which then causes the blades to spin. If the clutch assembly is not working correctly, the blades will not move to cut the lawn. If the blades will not engage or if they are stuck and won't disengage, the clutch assembly should be replaced. This can occur if the clutch assembly overheats. Excessive use and normal wear and tear can also be the cause of a bad clutch. Before working on the clutch assembly, make sure the engine has had time to cool off to prevent burns. Remove the fuel from the fuel tank and fuel lines. Remove the spark plug to prevent accidental engine starting. Park the machine on a flat surface and chock the wheels to prevent rolling. Remove and replace the clutch assembly, then reinstall all parts and fuel. Check the clutch after replacement to ensure it is working properly.This clutch assembly is sold as an individual unit. It is compatible with lawn tractors and tractors manufactured by Craftsman, Husqvarna, and Poulan.