Lawn Mower Transmission, Brake & Clutch
Genuine Husqvarna part
By: Husqvarna
Part Number: 589599201
This is a transmission designed for use with lawn mowers with a self-propel feature. The transmission is used to take power in the engine and move it to the wheels. It also controls the torque to manage the lawn mower's speed based on current conditions. If the transmission is damaged or worn, the pulley may continue spinning while the wheels refuse to turn.Several tools are needed for the replacement, including pliers, a drill, a nut driver, a socket wrench set, and work gloves. First, make sure the spark plug wire is disconnected. Remove the fuel tank cover, place a bag over the opening, and replace the cap. Remove the driver cover before releasing the ground drive belt from the pulley. Release the drive control cable from the post and take off the front wheels. Access and remove the transmission. Install the new part in the same location and reassemble.This is an authentic OEM Husqvarna transmission that is sold on an individual basis. It is compatible with lawn mowers and lawn tractors made by Husqvarna and Craftsman. The part comes with all needed axles and gears.
More
$128.95
- Compare At:
-
$153.45
- You Save:
-
$24.50
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 684-04153C
$106.46
- Compare At:
-
$126.69
- You Save:
-
$20.23
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 718-0228
This clutch collar is an authentic OEM part sourced directly from the manufacturer for use in lawnmowers and lawn tractors. If there are problems with the lawnmower jerking and sputtering after changing gears, the clutch collar should be removed and replaced to keep the lawnmower running properly. The clutch collar is part of the clutch bearing. The clutch collar is used between bevel gears as spacers and allows them to move in sync with the pinion gear. If the clutch collar is deteriorated, broken, or missing, a new one should be installed.Make sure the lawnmower is on a flat surface. Remove the spark plug and disconnect the battery. A screwdriver, pliers, socket set, wrench set, and nut driver are required to make this repair. Take the transmission out of the lawnmower. Open the case on the transmission and remove the broken clutch collar. Install the new clutch collar. Reverse the process to reassemble the lawnmower. This clutch collar is a high tensile metal part that is sold individually. It is designed for use in lawn tractors manufactured by Craftsman.
More
$27.30
- Compare At:
-
$32.49
- You Save:
-
$5.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 918-04045
This replacement clutch collar is used with lawn mowers. The piece is used as a spacer in the mower. It goes between the beveled gears, which will ensure they can properly rotate in sync to drive the pinion gear. If this piece is missing or damaged, the mower will not function properly, and it could be difficult to move the mower.The piece is made from metal and it should last a long time without issue. However, owners might find that they eventually need to replace the clutch collar. This could be due to damage from the elements, part of it could wear away or break off, or it could be lost during a different repair. Regardless, owners should replace the piece as soon as they realize that there is a problem.The clutch collar serves as a replacement for select models from Yard Machines, MTD, Husky, Bolens, Yard-Man, and Troy-Bilt. This is a genuine OEM replacement piece that has been sourced directly from the manufacturer. The clutch collar is sold individually.
More
$20.50
- Compare At:
-
$24.60
- You Save:
-
$4.10
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 530056520
This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 532404835
$6.43
- Compare At:
-
$7.72
- You Save:
-
$1.29
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 917-04184C
$10.95
- Compare At:
-
$11.10
- You Save:
-
$0.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 917-04192C
$10.95
- Compare At:
-
$11.30
- You Save:
-
$0.35
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 545139915
This is a replacement chain brake that is designed as an identical part for select chainsaws. The chain brake is a safety component that covers the bar connection and helps to prevent injuries due to broken or loose chains. This piece is exposed to a lot of potential impact damage and debris, which can affect how well it works. The cover can become cracked or otherwise damaged. Without the chain brake cover, the saw will be unsafe to operate. In some cases, models may not operate at all until the chain brake is replaced. This genuine part will provide an exact fit for compatible saws. This OEM chain brake is manufactured by Poulan and compatible with more than 60 chainsaws from Poulan and Husqvarna. The chain brake is a high-quality part that is made of durable metal and plastic and it is sold as an individual piece. The hardware to install this part is sold separately. It is important to install the chain brake with the appropriate hardware and using the right tools so that it can be engaged to stop the chain in the event that it breaks or comes loose. Always disengage the spark plug or disconnect the power supply before performing equipment repairs.
More
$36.95
- Compare At:
-
$43.97
- You Save:
-
$7.02
Out Of Stock
Usually ships within 4 - 14 days
Genuine Toro part
By: Toro
Part Number: 131-5399
$5.66
- Compare At:
-
$5.95
- You Save:
-
$0.29
Out Of Stock
Usually ships within 4 - 14 days
Genuine Honda part
By: Honda
Part Number: 42661-VE2-800
$5.65
- Compare At:
-
$5.95
- You Save:
-
$0.30
Out Of Stock
Usually ships within 4 - 14 days
Genuine Honda part
By: Honda
Part Number: 42661-VH7-000
$5.89
- Compare At:
-
$5.95
- You Save:
-
$0.06
Out Of Stock
Usually ships within 4 - 14 days
Genuine Honda part
By: Honda
Part Number: 54447-VL0-P00
$5.65
- Compare At:
-
$5.95
- You Save:
-
$0.30
Out Of Stock
Usually ships within 4 - 14 days
Genuine Husqvarna part
By: Husqvarna
Part Number: 583657001
$32.71
- Compare At:
-
$35.98
- You Save:
-
$3.27
Out Of Stock
Usually ships within 4 - 14 days
Genuine Troy Bilt part
By: Troy Bilt
Part Number: 656-04055A
$62.11
- Compare At:
-
$68.32
- You Save:
-
$6.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Snapper part
By: Snapper
Part Number: 7041855YP
$45.64
- Compare At:
-
$50.20
- You Save:
-
$4.56
Out Of Stock
Usually ships within 4 - 14 days