Maytag Cooktop Knob, Dial & Button

This replacement control knob restores a secure grip and accurate selection of settings on your appliance's control shaft. Swap a cracked, stripped, or missing knob to keep everyday operation smooth, precise, and safe.

• Attaches to the control shaft to select temperature, cycle, or burner settings
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps resolve issues like a knob spinning freely, difficulty turning, or inability to choose a setting
• Restores normal feel and alignment when turning the control

• Unplug the appliance and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control shaft; avoid prying on the stem
• Align the new knob with the shaft and press firmly until fully seated
• Test operation to ensure smooth turning and proper engagement

This replacement top burner knob restores smooth, reliable control of your cooktop or range surface burner. Use it to turn the burner on/off and adjust heat when the original knob is cracked, stripped, or missing.

• Mounts on the burner valve or switch stem to control flame/heat level
• Replaces knobs that are broken, loose, or no longer engage the stem
• Helps resolve issues like spinning freely, falling off, or hard-to-set heat
• Restores precise burner control and a clean, finished look

• Allow the appliance to cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; do not pry on the valve stem
• Align the new knob with the stem and press straight on until fully seated
• The knob markings match the correct burner position before use

This white control knob restores a clean look and reliable feel to your range's user controls. Replace a cracked, stripped, or missing knob so you can confidently select heat and function settings at the control shaft. What it does:

• Attaches to the control shaft to select heat or function settings
• Provides a pointer that aligns with panel markings for accurate selection
• Restores smooth turning when the old knob is cracked, stripped, loose, melted, or missing
• Helps ensure on/off and level adjustments engage properly

• 1 white control knob

• Pull the old knob straight off the shaft; avoid prying against the control panel
• Align the flat/D orientation of the new knob with the shaft and press straight on until fully seated
• Disconnect power and, if applicable, shut off gas before servicing any controls behind the knob
• Match part numbers to the correct location

Color: Stainless

This metal gas control knob replaces a damaged or worn stove/range knob to restore a secure grip and reliable control over burner settings. Easy to use and styled to match original factory controls. What it does:

• Allows safe selection of gas burner heat settings by turning the valve shaft
• Restores a firm, non-slip surface when an existing knob is cracked, stripped, or loose
• Helps resolve issues where the knob won't turn or won't stay set at the chosen flame level
• Matches original fit and feel for straightforward operation

• Turn off the appliance and shut off gas supply before servicing
• Typically installs by aligning on the valve shaft and pushing into place; no special tools required
• If knob does not seat correctly, check shaft for debris or a damaged splined insert

One knob per each package. Please order additional knobs if needed.

This replacement control knob restores a worn, broken, or missing appliance control for reliable selection of settings. It offers a direct-fit replacement to make dials easy to turn and read again. What it does:

• Replaces a damaged or missing control knob used to select cycle, temperature, or setting
• Provides a secure grip so the selector shaft turns smoothly
• Helps eliminate slipping, cracking, or a knob that spins without engaging
• Restores user control and improves safe, accurate setting selection

• Remove power to the appliance before servicing to avoid electrical shock
• Pull off the old knob; push new knob onto the selector shaft until it seats
• If knob does not fit, do not force onto a mismatched shaft

This burner knob is the user control for turning range or cooktop burners on and off and adjusting flame/heat settings. It restores safe, tactile control when original knobs are worn, cracked, or missing. What it does:

• Provides a grip surface and interface to rotate the valve or switch for burner heat selection
• Replaces worn, stripped, or damaged knobs that prevent smooth rotation or accurate setting
• Helps stop accidental heat changes caused by loose or broken controls
• Fits on standard splined valve stems used on many Whirlpool ranges and cooktops

• Disconnect power to the appliance and shut off gas before servicing
• Pull off the old knob straight from the valve stem; align splines and push the new knob onto the stem until fully seated
• Do not force the knob; if it does not slide on easily, verify correct orientation and spline match

This square burner control knob replaces a damaged or missing range/stovetop control knob, restoring secure grip and reliable temperature control for your burner. It matches the OEM shape and spline for a proper fit. What it does:

• Fits onto the burner control shaft to let you set and adjust flame/heat levels
• Replaces cracked, melted, loose, or missing knobs that are hard to turn
• Restores tactile control so settings click or stop at detents as intended
• Helps prevent accidental shaft access when the original knob is broken

• Turn off power to the appliance (and gas supply for gas range/stovetops) before servicing.
• Pull the old knob straight off the control shaft; align the knob spline and push the new knob on until seated.
• If knob is tight or stuck, gently wiggle while pulling; do not pry with metal tools.
• If control shaft or retaining clip is damaged, replace that component before installing the knob.

This replacement infinite control knob lets you precisely adjust the heat level on an electric cooktop or range surface element. It restores a secure grip and clear pointer for accurate temperature control during cooking. What it does:

• Fits onto an infinite (infinite-tap) surface element control shaft to select heat settings
• Provides a clear pointer for accurate selection of low-to-high settings
• Replaces worn, cracked, or stripped knobs that slip or won't turn
• Helps stop intermittent or unreliable control caused by a damaged knob

• Remove power to the appliance before servicing for safety
• Pull off the old knob straight from the control shaft; push the new knob onto the shaft until secure
• Confirm proper fit and full range of motion before restoring power

Replacement control knob that restores reliable operation and provides a secure grip for selecting settings. Replaces cracked, worn or stripped knobs so controls turn smoothly and selection is accurate. What it does:

• Provides a firm, indexed grip for turning temperature, burner or function controls.
• Replaces cracked, broken or cosmetically damaged knobs.
• Restores function when the knob slips on the splined shaft or the indicator is missing.
• Helps prevent intermittent or imprecise control selection caused by worn knobs.

• Disconnect power (unplug or switch off breaker) before servicing the appliance.
• Pull the old knob straight off the control shaft; align the new knob's spline with the shaft and push firmly until seated.
• If the knob does not seat easily, check for debris or correct spline orientation—do not force excessively.
• No special tools are typically required.

Color: Stainless

This replacement control knob restores a secure grip and clear pointer for selecting heat and function settings on compatible Whirlpool appliances. It provides a precise, easy-to-read control surface so you can operate your appliance confidently. What it does:

• Replaces a worn, cracked, or missing control knob to restore manual control
• Fits on standard splined control shafts to select temperature or function positions
• Helps resolve symptoms like loose knob movement, slipping on the shaft, or illegible setting indication
• Matches OEM shape for correct fit and tactile feedback

• Pull off the old knob by hand; align the splines and push the new knob fully onto the shaft until it seats
• If knob is tight or hard to remove, power off the appliance and before using tools
• Do not overtighten or force onto the shaft; avoid using excessive heat or solvents
• If electrical access behind the panel is required, disconnect power first and follow all safety guidelines