Maytag Refrigerator Drawer, Shelf, Pan

Plastic divider that fits inside the full-width pantry or deli drawer to create separate sections. Replace if cracked, broken, or missing to restore organization.

Replacement divider for refrigerator pantry or deli drawer. Separates foods and prevents shifting. Essential when original is cracked, broken, or missing.

Center support that stabilizes the crisper cover above drawers to prevent sagging. Replace if cracked, broken, or missing to restore proper alignment.

This bracket provides structural support for refrigerator drawers on the left side, helping them slide smoothly and remain stable. Located inside the refrigerator on the left interior wall, replace it when drawers sag, won't slide properly, or become loose and unstable.

This right-hand side adapter bracket secures the appliance cabinet or panel, restoring proper fit and stability. Replacing a damaged or missing bracket helps stop loose or misaligned panels and reduces rattling. What it does:

• Secures the right-side cabinet or panel to the chassis to maintain alignment and support.
• Helps eliminate panel movement, vibration and rattling that result from a cracked or missing bracket.
• Restores correct panel gaps so doors or drawers operate and close properly.

• Disconnect power (unplug or shut off breaker) before accessing the appliance.
• Remove the required access panels to reach the bracket; keep and reuse existing fasteners unless new hardware is specified by the model diagram.
• Transfer the bracket into position and fasten securely; check for proper panel alignment after installation.

This mounting cup installs in the freezer liner to create a secure attachment point for the ice maker or its bracket. It helps keep the assembly stable and properly aligned so the ice maker mounts firmly and operates reliably. What it does:

• Provides the receiving anchor for the ice maker/bracket mounting screw
• Helps hold the ice maker level and reduces movement or vibration
• A worn, stripped, or missing cup can prevent the screw from tightening
• Common signs include a loose or sagging ice maker, rattling, or difficulty keeping the ice maker aligned

• 1 mounting cup

• Disconnect power and shut off the water supply before servicing
• Remove the ice maker to access the cup location
• Seat the cup fully into the liner opening, then reinstall the bracket/ice maker and mounting screw
• Do not overtighten; verify the ice maker sits level and clears the fill tube

The lower left support cradle that holds and guides a drawer or basket inside the refrigerator, keeping it level and allowing it to slide in and out smoothly. It mounts to the interior wall of the refrigerator and bears the weight of the drawer and its contents. Replace this part if the lower left drawer is sagging, difficult to open, or has come off its track.

Replacement drawer slide for bottom-mount refrigerators. Guides drawers to open and close smoothly. Install when original is cracked, broken, or worn.

Replacement shelf slide for bottom-mount refrigerators. Guides and supports shelves for smooth gliding. Replace if cracked, broken, or worn to restore stability.

This screw support secures the dryer drum ladder assembly, helping maintain proper alignment and stable rotation for reliable drying performance. It replaces a worn or broken support to reduce noise and rattling during operation. What it does:

• Holds the ladder/support bracket in place so the drum rotates smoothly.
• Prevents excessive movement that can cause scraping, knocking, or rubbing noises.
• Restores correct positioning to reduce wear on adjacent components.
• Suitable when the original support is cracked, bent, or missing fastener points.

• One screw support (ladder) as shown.

• Intended for experienced DIYers; confirm compatibility with your model before installing.
• Disconnect power (unplug electric or shut off gas and unplug) before beginning work.
• Handle small parts carefully and keep track of fasteners; use appropriate hand tools.

This is a left-side slide rail that mounts inside the freezer compartment and supports a sliding storage basket or drawer. It allows the basket to glide smoothly in and out for easy access to frozen items. Replace this track if the freezer basket is difficult to slide, sits unevenly, or if the rail is cracked or broken.

Replacement shelf glide for refrigerator drawers and shelves. Installs on the side wall to support sliding storage components. Needed when cracked or worn.

Mounting bracket that secures and supports refrigerator shelves or drawers. Replace if cracked, bent, or broken to restore proper alignment.

Replacement utility pan for refrigerator storage compartments. Restores organization when original is cracked, broken, stained, or missing.

Replacement utility pantry drawer pan for bottom-mount refrigerators. Stores deli meats, cheeses, and small items. Replace if cracked, broken, or damaged.

Replaces the cracked or broken plastic front panel on your refrigerator freezer wire basket. Keeps food contained and helps the basket slide smoothly.