Maytag Refrigerator Tank Or Reservoir

I had a slow leak at the water inlet valve where the water line from the filter assembly connected to the water inlet valve. I determine that the water line had scratches in it which caused it to not seal. Had to buy the entire reservoir and filter assembly to get that water line. The replacement was smooth. It took about 30 minutes to swap out and it fixed the leak. Read more

Water dispenser came down to a trickle and made a lot of noise, I changed the filter but it didnt help and thus the water tank/head assembly needed to be replaced. Replacing the water Tank/head assembly was an easy task, the hardest part is removing the covers and taking care of not breaking the insulation of the water inlet hose. For the not-so-experts like me it is also good to rememebr to have a bucket to collect all the water that comes out after the connection to the solenoid valves is... Read more

After watching installation videos on each felt I could pull it off and ordered and received replacement water reservoir and water dispenser tube assembly. Reservoir installation went off without a hitch outside of the added step of the need to remove the entire main in waterline assy in order to access the connectors which also were not as represented in video, in that they were not the press-to-release type but standard threaded compression types. Water Dispenser tube/spout assembly was much... Read more

Every six months I change my refrigerator filter. I purchased a new filter (UKF8001) and installed it just like I've done many times before. This time, when I first used the water dispenser, I got a horrible sound (kind of like a jack hammer/vibration) followed by very little water flow. I disconnected the new filter and reinstalled the old filter, thinking maybe I got a bad filter. No improvement. I removed the filter and put the bypass cap on and everything returned to normal. Since... Read more

The storage device for water had a cracked fitting so when either the water or ice solenoid was activated the water ran into the compartment. I replaced the storage device (reservoir) once I figured out how to remove the upper cover in the top of the refrigerator. I needed to remove two screws located by the water filter these are the only fasterners needed to be removed, after that you need to pry down on the entire cover which is snapped in place, disconned the electrical connections and your... Read more

Replaced the entire part with new side drawer support. Worked great! Should have done it sooner. Read more

Replaced water reservoir, filter assembly, and water line via the provided instructional videos. The only problems I had where that the water line video had a different fridge layout (filter assembly was perfect), and the inevitable leak on one of the sharkbite-style connectors. I dread dealing with plumbing leaks, so I work on it a little, come back to it the next day, get a little further, etc. Read more

Replaced water reservoir that had become contaminated with ??? Also had to replace the water filter, because the water contaminated it also. Cost was about $150, for two filters and the reservoir. The first filter was replaced because I did not know the reservoir was contaminated, and no water was coming out of the dispenser. Since the water in the ice maker did not come through the reservoir, there was no smell or contamination there. The new filter enabled water to come through the dispenser,... Read more