Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Maytag Refrigerator Dispenser Parts

Best Seller
Maytag Ice Dispenser Guide
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180224

The Ice Dispenser Guide is an OEM replacement part for Whirlpool brand refrigerators. These brands also include Maytag, KitchenAid, Norge, Roper, Estate, and Kenmore models. It directs ice from the ice bucket to the dispenser chute. It helps to prevent jams by guiding the ice through the dispenser system smoothly and evenly.

You should replace the ice dispenser guide if you notice any signs of wear or damage, such as cracks or warping. A damaged dispenser guide can cause ice jams or blockages. This can prevent ice from dispensing properly or create excessive noise or vibration during the dispensing process.

Get yours today and restore proper ice dispensing function and prevent future issues with the ice dispenser system.

This part fixes the following symptoms
  • Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You Ice cube dispenser/flap was broken not actuating the ice bucket motor.   Peter P. • Sonoma , CA • July 24, 2023

Ice Door Kit, Control Bracket, and Ice Dispenser Guide were purchased. I followed two videos on replacing the parts. The Control Bracket WP2180226 / AP6005965, was straight forward and I discovered a snapped pin on the old bracket causing an electric switch to be out of place... that repair was easy. When it came to the hinges of the ice chute, I discovered the snap-in, on right side, of the hinge was cracked... this is why the pin escaped. This cracked part is molded into the entire... Read more

More
$16.95
Compare At:
$20.17
You Save:
$3.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Ice Dispenser Chute Door
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2180353

The Ice Dispenser Chute Door is an OEM part for Whirlpool refrigerators. This component is located in the ice dispenser mechanism on the freezer door and is responsible for opening and closing the ice chute. The chute door helps to dispense ice properly and prevents warm air from entering the freezer compartment, which can lead to frost buildup and inefficient cooling.

Symptoms of a failing Ice Dispenser Chute Door include:

  • Ice not dispensing properly or getting stuck in the chute
  • Frost or ice buildup around the ice dispenser area
  •  Warm air entering the freezer, causing temperature fluctuations
  • The dispenser door not opening or closing correctly, leading to gaps

Causes of a bad ice dispenser chute door can include wear and tear from regular use, damage from ice jams or blockages, and degradation of the door’s sealing mechanism over time.

This OEM part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

 

Note: This part longer uses the ribbon heater due to the improved foam design. If your refrigerator uses this ice door and the mounting tabs are broken, you can use the broken tab ice door kit 8201756.

This part fixes the following symptoms
  • Door sweating
See more...
Do-It-Yourself Stories from Customers like You Ice dispenser chute door was not closing or sealing   Robert H. • West Palm Bch , FL • July 23, 2025

The ice dispenser chute door had not been sealing for years. The ice cubes on the lower portion of the ice bin would melt enough eventually to then freeze up into a big, amalgamated blob of ice due to ambient air coming up the chute. This melt-then-freeze would happen, to the extent the chute froze to its own closure. Despite service technician visits over a period of six years nothing they did resolved the issue. I opened the freezer door to reach into the bin from the top to extract usable... Read more

More
$16.95
Compare At:
$20.00
You Save:
$3.05

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dispenser Overflow Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206670B

The Dispenser Overflow Grille is an OEM part for Whirlpool refrigerators. It fits in the dispenser area and catches any spills or overflow from the water and ice dispenser, preventing them from dripping onto the floor or into the appliance.

You should replace the dispenser overflow grille if it becomes cracked, warped, or otherwise damaged. Causes of a bad overflow grille can include constant exposure to water, accidental impacts, or regular wear and tear over time.

Symptoms of a bad dispenser overflow grille include:

  • Visible cracks or breaks in the grille
  • Water pooling around the dispenser area
  • The grille not fitting securely in place
  • Difficulty in keeping the dispenser area clean

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Other colors:

Do-It-Yourself Stories from Customers like You Stubborn deposits in our water discolored the overflow frille on our refrigerator. Absent this part, we had to paint!   Stephen D. • Vancouver , WA • March 25, 2014

Finding the part was puzzling. AppliancePros had the relevant manufacturer's part schematics handy on-line through which I quickly identified and order the replacement part. But the best aspect was AppliancePros' Amazon-like excellence in a) pricing and b) swift delivery (with precious tracking included). Read more

More
$34.95
Compare At:
$41.59
You Save:
$6.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Detergent Lid Pin
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3372028

The Detergent Lid Pin is an OEM part for Whirlpool dishwashers. This pin plays a crucial role in securing the detergent dispenser lid, ensuring that it opens and closes correctly during the washing cycle. This dishwasher detergent lid pin is also included in the cover kit 4387043.

Over time, the detergent lid pin can wear out or break due to regular use, exposure to harsh detergents, or accidental force. When the pin is damaged, it can cause the detergent lid to malfunction, leading to improper dispensing of detergent and reduced cleaning performance.

Symptoms of a bad detergent lid pin include:

  • The detergent dispenser lid not staying closed
  • Detergent not being dispensed correctly during the wash cycle
  • Visible damage or wear on the pin
  • The dispenser lid not opening or closing smoothly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Latch would not open consistently on detergent dispenser   James G. • Waxhaw , NC • January 12, 2015

Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle. Read more

More
$10.95
Compare At:
$12.92
You Save:
$1.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Ice And Water Dispenser Pads
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10368730

The Ice and Water Dispenser Pads is an OEM replacement part for Whirlpool refrigerators. It consists of two actuator pads that attach directly to the dispenser housing and are responsible for activating both the water and ice dispensers. The pads work together to trigger the dispensing mechanism and intuitively control the flow of water and release of ice cubes.

Constant use can cause actuator pads to become worn out or damaged.

Symptoms of bad pads include:

  • Intermittent or unreliable dispensing
  • Increased difficulty activating the dispensers
  • Dispensers activating on their own without input

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Water actuator pad was cracked   Kevin O. • Lancaster , NY • March 27, 2018

Replaced the actuator pad on the Whirlpool Gold Series, releasing the electronic menu pad to get to the water activator pad was the biggest hurdle. The release tabs are underneath the menu pad and you may feel as if you may break them when releasing them. They did not break but I did hold by breath. Read more

More
$130.95
Compare At:
$155.83
You Save:
$24.88

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dispenser Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10353848

The Dispenser Pad is an OEM part for Whirlpool refrigerators. It is the user interface component that allows you to control and operate the water and ice dispensers.

Causes of a bad part can include physical impact or mishandling, exposure to moisture or liquid spills, or general wear and tear over time, leading to deterioration of the pad's internal electronics or surface.

Symptoms of a bad Dispenser Pad include:

  • Unresponsive or non-functional dispensers
  • Difficulty in selecting water or ice options
  • Visible cracks, damage, or wear on the pad surface

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Intermittent ice dispensing switch.   Stan R. • Oceanside , CA • July 29, 2023

Order part and replaced switch. Read more

More
$134.95
Compare At:
$160.59
You Save:
$25.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Ice Door Fountain Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001991

The Ice Door Fountain Kit is an OEM replacement part for Whirlpool refrigerators with built-in ice makers. It directs water to the ice molding trays and facilitates automated ice cube harvesting. Kit includes flapper, solenoid, strike arm, solenoid plunger, and instructions. Spring is not included. For the spring order 61004388.

Causes of a bad ice door fountain kit can include wear and tear over time, buildup of ice or debris obstructing the door mechanism, or damage to the components from frequent use.

Symptoms include:

  • Incomplete ice cubes or low ice yield
  • Drips or leaks in the ice maker area
  • The ice drawer fails to eject cubes fully

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Door sweating
  • Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You The ice door would not close all the way and would allow air to go up to the ice storage compartment this would cause a frosty build up which interfered with getting ice to come down the shute   Thomas C. • Iowa , LA • August 29, 2015

We ordered the Ice Door Fountain Kit and ice door spring, which was delivered to our home within three or four days. I understood everything about how to change it except the placement of the spring. A video on your website showed exactly how to put the spring in place and helped me get the job done quickly. It solved our problem and we really appreciate your services. Read more

More
$123.35
Compare At:
$148.02
You Save:
$24.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Ice Chute Door
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12562701

The Ice Chute Door is an OEM replacement part for Whirlpool side-by-side refrigerators. It provides access to the dedicated ice and water storage and dispensing compartment located on the refrigerator door.  

Causes of a faulty chute door can include normal wear from frequent use. Internal temperature fluctuations may cause durability issues over several years.

Symptoms of problems include:

  • Failure to fully close or form a tight seal  
  • Difficulty dispensing ice or water due to door misalignment
  • Premature cooling loss from unsealed opening
  • Physical damage preventing proper closing

This OEM door is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators.

Do-It-Yourself Stories from Customers like You Teeth broke off of ice chute door   Deanna N. • Bay Saint Louis , MS • March 01, 2018

Replaced ice chute door by watching video. Read more

More
$9.95
Compare At:
$11.74
You Save:
$1.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dispenser Overflow Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206670W

The Dispenser Overflow Grille is an OEM part for Whirlpool refrigerators. This grille sits below the water and ice dispenser on the refrigerator door, catching any spills or overflow to keep the area clean and prevent water from dripping down the refrigerator. For Black order 2206670B, for Bisque order 2206670T

Causes of a bad dispenser overflow grille can include repeated exposure to water, impact damage, or general wear and tear.

Symptoms of a bad dispenser overflow grille include:

  • Cracks or visible damage to the grille
  • Water not being effectively caught, leading to drips and spills on the refrigerator door
  • Discoloration or staining of the grille

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stained and etched dispenser paddles needed to be replaced   Josh R. • Corpus Christi , TX • February 04, 2015

Once the parts arrived, I followed the help video that was emailed to me with my order confirmation step by step. Super useful! The video quality and editing were well done and the instructions were very specific. I felt like a pro! Read more

More
$55.38
Compare At:
$65.35
You Save:
$9.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dispenser Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10397395

The Dispenser Grille is an OEM part for Whirlpool refrigerators. This grille is located at the base of the refrigerator's water and ice dispenser, collecting drips and spills to keep the dispenser area clean and dry. 

Causes of a bad dispenser grille can include regular use, accidental impacts, or exposure to harsh cleaning chemicals.

Symptoms of a bad dispenser grille include:

  • Visible cracks or breaks in the grille
  • Discoloration or staining
  • Difficulty fitting the grille into place
  • Accumulation of water or debris around the dispenser area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Missing part for water dispenser   Michelle B. • Richmond , VA • September 29, 2018

Ordered part, it fit perfectly! Read more

More
$45.95
Compare At:
$54.22
You Save:
$8.27

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Pad, 1-Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: W10133606

This genuine replacement pad provides the specified cushion or contact surface in your appliance. Replacing a worn, flattened, or missing pad restores proper fit, helps quiet operation, and protects adjacent parts from rubbing and premature wear.

  • Provides the designed cushion/spacing or contact surface between components
  • Helps dampen vibration and reduce rattles or squeaks in the area of use
  • Protects finishes by preventing metal-to-metal or plastic-to-metal contact
  • Restores proper alignment or smooth actuation where a pad is specified
  • Common signs it's due: missing pieces, cracking, compression, residue, or new noises from that location
What's included: One pad Install notes:
  • Disconnect power (and water, if applicable) before servicing
  • Access the pad location per your model diagram; note original placement and orientation
  • Clean the mounting surface; if adhesive-backed, peel liner and press firmly; if clip- or friction-fit, seat fully
  • Reassemble and test for proper fit, quiet operation, and smooth function

Do-It-Yourself Stories from Customers like You Had to press water pad really hard to get water to dispense   Robert F. • Heath , TX • April 10, 2020

Super easy fix, remove two screws behind drop tray, unplug the wiring harness to dispenser, unplug and remove old pad, then snap new one into place. Reconnect harness. Took less than 5 minutes, works like new. Read more

More
$203.79
Compare At:
$242.51
You Save:
$38.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Water Lever (Wht)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152858

Color: White

Do-It-Yourself Stories from Customers like You The ice dispenser lever was cracked and did no longer trigger the dispensing of the ice   Andrea M. • Honolulu , HI • March 01, 2015

I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better. I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some... Read more

More
$53.33
Compare At:
$64.00
You Save:
$10.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dispenser Drip Tray
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12999301B

Color: black. Measures about 8 inches wide by 3 inches deep.

Do-It-Yourself Stories from Customers like You Drip tray on refrigerator door dispenser got warped by running through dishwasher   Gary K. • Colbert , WA • January 21, 2019

The tray just sits in a slot on the door so no tools required Read more

More
$16.95
Compare At:
$20.34
You Save:
$3.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Drip Tray
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10305897

Color: Stainless

Do-It-Yourself Stories from Customers like You Ice maker wouldn't stop dispensing ice.   Alexander V. • Kingwood , TX • May 01, 2018

After using the crushed ice feature on my KitchenAid French Door refrigerator, the ice maker wouldn't stop dispensing ice, crushed or cubed. I thought it had to do with the paddle switch being stuck or something else in the door, but all door components seemed to be working as intended. I ended up pulling the ice maker out and disconnecting the wires to the auger so that I could leave the refrigerator plugged in. I call AppliancePartsPros.com the following morning and explained my situation.... Read more

More
$53.32
Compare At:
$63.45
You Save:
$10.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: W10133603

Used on the black and aluminum models

Do-It-Yourself Stories from Customers like You Water pad on refrigerator worked only when you pushed very hard on one 1/4" x 1/2" spot   David P. • Hoover , AL • June 22, 2019

Removed water catcher, then 4 screws in water/ice vault in door, then removed screws on door side (5) top (2) and bottom (2). Removed stainless door skin. Removed 4 hex head bolts in ice/water vault (containing pads) and 4 bolts on the module immediately above the vault. Pulled the vault and module above out part way to unplug one cable. Then laid on table to unplug pads. From back, each pad has a small indent preventing the pad from being pushed up and removed. Push the small indent with a... Read more

More
$212.95
Compare At:
$253.41
You Save:
$40.46

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Overflow Grille
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206671B

Color: black. Measures about 9 inches wide by 2-1/2 inches deep.

Do-It-Yourself Stories from Customers like You Stopped dispensing water   Cristopher C. • Santa Rosa , CA • July 15, 2016

Ordered the parts. Watched a great video on this web site. Installed. Fixed. Easy peesey. Read more

More
$55.38
Compare At:
$65.35
You Save:
$9.97

IN STOCK
Ships Today Guaranteed
Add to Cart

Maytag refrigerator dispenser replacement parts are essential for keeping your fridge running smoothly. A functional dispenser can make all the difference in your kitchen, ensuring you always have access to fresh water and ice. Maytag refrigerators are staples in many homes, and these parts are often the unsung heroes that help maintain their top-notch performance.

The dispenser components, whether it's a water filter, an actuator pad, or a dispensing valve, play a crucial role in maintaining the functionality of your refrigerator. Utilizing high-quality Maytag refrigerator dispenser parts ensures that your appliance operates efficiently, minimizing downtime and maintaining the quality of your water and ice. When you opt for OEM replacement parts, you're choosing components designed specifically for your Maytag appliance, guaranteeing compatibility and reliability.

So, whether you're looking to fix a broken dispenser or simply want to perform some preventive maintenance, you can rest assured that quality and readily available replacement parts will keep your Maytag refrigerator in tip-top shape. These parts make all the difference in everyday convenience and reliable performance.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store