Maytag Refrigerator Wire, Harness, Power Cord

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire harness connects the appliance's control and power circuits to key components, restoring reliable electrical communication and control. It replaces a damaged or frayed harness to help resolve intermittent power, no-start, or unresponsive control issues. What it does:

• Carries power and signals between the control board and components like motors, switches, and heaters
• Restores continuity when original wires are burned, cut, or have broken connectors
• Helps stop intermittent operation, control failures, or components that no longer receive power
• Matches OEM routing and connectors for a direct replacement when specified

• One complete wire harness as shown

• Disconnect all power before attempting replacement to avoid shock or injury
• Tighten any mounting clips and secure wiring away from heat or moving parts

This wire harness connects the appliance's control and power circuits to internal components, restoring reliable electrical routing for controls, motors, and heating elements. Use when wiring is damaged, burned, or causing intermittent power issues. What it does:

• Routes power and signals between the control board and internal components for proper operation
• Replaces damaged, frayed, or burned wiring that can cause intermittent operation or failure to start
• Helps resolve symptoms such as no power to components, control errors, or appliances that run intermittently
• Restores secure plug-and-play connections to maintain safe, reliable electrical paths

• Disconnect power before starting; this part services live electrical circuits
• Inspect connectors and mating points; replace if terminals are corroded or damaged
• Route harness away from heat sources and moving parts; secure with existing clips or ties

The Wire Harness is an OEM part for Whirlpool refrigerators. It provides the electrical connection between various parts of the refrigerator, ensuring proper communication and voltage.

A bad wire harness can occur due to wear and tear, electrical malfunctions, or damage to the wiring itself. If you notice symptoms such as the refrigerator not cooling properly, erratic behavior, or error codes displayed on the control panel, it may be time to replace the wire harness.

Symptoms of a bad wire harness include:

• Inconsistent cooling or inadequate temperature control
• Erratic behavior or unusual noises coming from the refrigerator
• Error codes displayed on the control panel

Repair your refrigerator by replacing the faulty or damaged wire harness with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This wire harness routes power and signals between the appliance's controls and components to restore electrical connections and reliable operation. It replaces damaged or frayed wiring that can cause intermittent function or no power to circuits. What it does:

• Connects control board, switches, and components so signals and power transfer correctly
• Replaces broken, burned, or corroded wiring that can cause intermittent operation or component failure
• Restores proper routing and secure connections to reduce short circuits and poor contact
• Helps resolve symptoms such as non-responsive controls, no power to parts, or erratic operation

• Disconnect power (unplug appliance or shut off breaker) before starting any work
• Observe proper wire routing and secure all retaining clips and connectors to prevent rubbing or pinching
• Match connector shapes and colors; do not force connections or modify wires

This wire harness is the factory-style wiring assembly that routes power and signals between components, restoring reliable electrical connections for safe appliance operation. Replace a damaged or burned harness to reestablish proper power and control function. What it does:

• Carries power and control signals between controls, motors, switches, and sensors
• Restores lost or intermittent power caused by frayed, broken, or burned wires
• Prevents shorts and arcing from damaged insulation or loose connectors
• Ensures correct connector routing for dependable component operation

• Disconnect power (unplug or shut off breaker) before starting any repair
• Compare new harness to the old part for connector type, length, and routing before installation
• Route wires along the original paths and secure all clips and fasteners to avoid rubbing or heat contact

This dispenser harness is the wiring assembly that connects the refrigerator dispenser components to power and control signals, restoring electrical continuity so the dispenser, water, or ice functions can operate correctly. What it does:

• Routes power and signal connections between the dispenser controls and the appliance wiring
• Replaces damaged or corroded wiring that can cause intermittent dispenser, water, or ice operation
• Restores reliable connector fit and electrical contact to resolve connection-related faults
• Works with dispenser switches, solenoids, and control modules that use this harness

• Disconnect power to the appliance before starting any repair to avoid shock
• Inspect connectors and routing; match connector shapes and terminal counts before connecting
• Secure the harness away from moving parts and sharp edges to prevent wear