Mcculloch Parts

This part is a replacement isolator spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective isolator spring in a variety of chainsaw models.The isolator spring is located in-between the chassis and the handle. This part helps to reduce the amount of vibration caused during use and is essential for safe and comfortable use of the chainsaw. Springs may become stretched, corroded, snapped, or rendered ineffective over time or with regular use, requiring replacement. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this isolator spring, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this isolator spring is suitable for use on chainsaws manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This is a throttle housing designed to go around the throttle cable, trigger, and wire to keep all of those components secure and protected. It's made of durable plastic but wear and tear or impact can damage or break the throttle housing.It's easy to determine with visual inspection if the throttle housing needs to be replaced. A pair of work gloves and an Allen wrench will be needed to complete the repair. The process involves taking out a set of four screws that hold the old throttle housing. Take it off of the equipment and install the new one using the same screws. Once the new housing is placed, the equipment can be used as normal.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle housing is made for use with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Craftsman. This part is sold individually. This part is sold individually.

This gasket replacement kit is for use with several types of handheld lawn and garden tools to help ensure there are no leaks of air or oil in the engine. They are an important part of the engine and help it continue to run efficiently. Over time, the gaskets will start to wear down. They might become brittle and start to crack. In some cases, they may no longer sit properly and could allow for leaks. If an owner notices an engine running roughly or leaking oil, the problem could be with the gaskets. They will need to be replaced. This replacement gasket kit is a genuine OEM selection. It includes the major gaskets and O-rings that need to be replaced when the owner is rebuilding an engine. These gaskets will work with trimmers and pole pruners. The compatible brands include Craftsman, Weed Eater, Poulan, Poulan Pro, and Husqvarna. Buyers should always double-check to ensure the gasket kit is compatible with their make and model.

This shield kit is a genuine Husqvarna replacement part for a line trimmers and pole saws. The shield kit, also known as a guard, is a safety precaution to protect the engine from damage and to protect the appliance user from flying debris. The shield also manages the amount of string trimmer line that is spooled out. The shield kit of a line trimmer or pole saw might have to be replaced if there is significant damage to the exterior. While shield kits for line trimmers and pole saws are designed to be durable, the exterior can be gradually worn away by collisions with flying debris and small stones, causing warping and erosion to the plastic material. If the shield kit is damaged, it must be removed and replaced immediately, as it is important for safe use of the appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shield kit is compatible with the following brands: Husqvarna, Weed Eater, Craftsman, and Poulan. This part sold individually.

The carburetor takes in air and fuel from the engine and mix them together, sending them through a butterfly valve into the engine. Though the carburetor has filters in place, it can still become clogged or damaged over time. It may just wear out and stop working. Assess the carburetor by putting fuel directly into the carburetor and starting the engine. If the engine dies as soon as it starts, it's likely the carburetor needs to be replaced. This carburetor assembly manufactured by Poulan for use in select lawn and garden equipment engines can provide the ideal replacement part. Be sure to disconnect the spark plug before beginning any engine work and always wear gloves. Drain the fuel system when replacing this part for safety and ease of repair. This OEM replacement can be used in Weed Eater and Poulan gas trimmers with compatible model numbers. It will work with about a dozen trimmers and pruners from these two brands. This part is sold individually as a full assembly, including the primer bulb.

This part is a replacement D-handle nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended for use as a replacement in a defective or misplaced nut in outdoor power equipment. This D-handle nut is a standard piece of hardware and thus has many functions. The D-handle enables this nut to be easily tightened and loosened by the user. Nuts can easily become worn, corroded, or lost, requiring replacement. Proper tools are not required to install this D-handle nut. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this D-handle nut, the appropriate owner's manual and equipment diagrams should be referred to. This D-handle nut is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with small engine outdoor power equipment that has been manufactured by Husqvarna, Poulan, and other brands.

This part is a lower tube for a lawn and garden blower or vacuum. The lower tube directs the lawn and garden debris into the collection bag.A new lower tube will be needed if the original is cracked, broken, or damaged in any way. If the lower tube is broken, the lawn and garden debris will not be directed into the collection bag and so the device will not be operating as it is supposed to. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This lower tube is a genuine Husqvarna part. It is sold individually. This specific lower tube is compatible with lawn and garden blowers and vacuums that are manufactured by the Husqvarna and Craftsman brands.

This part is a replacement spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current spring is broken or defective, this part can be used as a replacement. It is intended for use with trimmers.The spring works by applying tension to the head of the trimmer. Over time and with regular use, springs can easily break or become eroded, requiring replacement. When working on or near an engine or blades, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this spring, the appropriate owner's manual and equipment diagrams should be referenced. This spring is suitable for use on a variety of trimmer models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

This is a replacement knob for a trimmer. The plastic bump knob, which is connected to a spring, is used to secure the spool. A bump knob on a trimmer may get stuck or seized and will need a replacement. Before replacing the bump knob, remove the wire from the spark plug to avoid the accidental starting of the engine. Pull off the trimmer head housing and then use a flat head screwdriver to detach the old knob. Rotate it and then remove the component. Make sure the spring is in place then align the knob before rotating and snapping it in place. Take note that pulling the knob off may take extreme force when pulling. Some knobs are screw-mounted and a counterclockwise turn is necessary to unscrew it. This genuine OEM replacement part is sold individually and is compatible with specific trimmer models from Poulan and Weed Eater.

This is the outer cover for a string trimmer housing. It clips into the bottom of the reel and secures it in place behind the central button. It’s constructed from a rubberized black plastic. This plastic is designed to be as durable as possible, while also flexing slightly when it’s under pressure. The cover serves two primary functions. It holds the reel in place and also acts as a mounting point for the central button. While it’s quite durable, it may eventually wear out due to regular use. A few scratches aren’t going to put a cover out of commission, but look for areas where the plastic has been worn through all the way. Replacing the cover is easy. Simply squeeze the old cover and pop it off the assembly. Position the new cover over the reel, then snap it into place. This cover is used primarily on Husqvarna string trimmers but is also used on some Poulan and Craftsman models. This is an OEM part sourced directly from Husqvarna, and it is sold individually.

This is a genuine replacement spark arrestor kit that is used with certain styles and models of chainsaws. The spark arrestor kit will attach to the cylinder gasket and is designed to catch any particles that are coming from the engine that are hot or likely to create a fire risk. This ensures that the internal combustion engine can operate effectively. When the spark arrestor is damaged or worn, or if pieces go missing, it will not be able to give the engine the protection from flammable debris that it needs. A replacement is necessary for the safe operation of the chainsaw. This OEM authentic spark arrestor kit is manufactured by Poulan and compatible with over 50 of the chainsaws that are made by the brand. This kit includes the screen, the metal arrestor, and the nut that connects the components and helps secure the entire assembly to the engine's cylinder gasket. This part replacement will require a nut driver and a set of pliers. Allow the engine to cool completely and always disconnect the spark plug when performing engine repairs or internal replacements. Owners will want to wear gloves for hand protection, as well.

This genuine Husqvarna purge & line assembly can be used as a replacement part for the small engine of a chainsaws. The function of a purge & line assembly for a chainsaw is to provide fuel to the primer bulb, which delivers the fuel to the carburetor, which mixes the fuel with the air intake in the proper ratio to ignite the spark plugs and power up the engine.A purge & line assembly might have to be ordered as a complete replacement for a primer bulb in the event that the primer bulb malfunctions or falls into disrepair as a result of damage suffered. Symptoms of a malfunctioning or broken primer bulb can include fuel leakages that can be attributed directly to the primer bulb, an engine that misfires or has frequent false starts, or a cracked, pierced, or eroded bulb. If any of these symptoms are the case, the bulb should be removed and replaced with this genuine OEM assembly before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This purge & line assembly is compatible with the following brands: Husqvarna, Craftsman, and Poulan.