Parts for Ge JVM1440BA01: 01 - Microwave Parts

The Microwave Door Handle is an OEM part for GE microwaves. It allows you to easily open and close the microwave door, providing a secure grip for safe and convenient access to the appliance's interior. Please note the screws are not included with this handle.

Common causes of a bad door handle include frequent use, accidental impacts, or wear and tear over time. A faulty door handle can make it difficult to open or close the microwave door, impacting the overall functionality of the appliance.

Symptoms of a bad microwave door handle include:

• The handle is loose or wobbly
• Cracks or breaks in the handle
• Difficulty opening or closing the microwave door
• The handle coming off completely

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Upper door hinge for microwaves. Secures the door at the top mounting point. Replace if cracked, broken, or worn to restore proper door alignment.

Replaces the door liner and choke assembly on your microwave. Needed when the original liner is cracked, broken, or missing to restore proper door seal.

Replacement display window for microwave control panel. Covers and protects the digital display. Needed when original is cracked, scratched, or missing.

Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.

Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.

Black bottom base panel for microwave chassis. Replaces cracked, broken, or missing base. Structural support component for cabinet assembly.

Captures grease particles during cooking to maintain air quality and microwave efficiency. Replace when clogged or discolored. Verify fit with your model.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Fixes microwaves with motors that start slowly or make abnormal noise. This run capacitor stores electrical energy to help motors start and run smoothly.

Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.

Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.

Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.

Wire harness assembly for microwaves. Connects door switches to control board. Replace if wires are discolored, frayed, damaged, or showing poor connection.

Turntable stopped turning or making grinding noise? This motor rotates the glass plate for even cooking. Easy 5-10 minute DIY fix with basic tools.

Secures the microwave air guide or duct in proper position. Replace if your bracket is cracked, broken, or missing to restore stable internal airflow.

Microwave won't turn on or is completely dead? A blown fuse is often the cause. This safety fuse protects against power surges. Easy 5-minute DIY fix.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

This mounting bracket secures the H.V.C. assembly or cover in place to keep high-voltage components stable and properly aligned. Replacing a damaged or bent bracket restores correct support and reduces movement-related issues. What it does:

• Secures the high-voltage cover/assembly to the appliance chassis to prevent shifting.
• Maintains correct clearance and alignment for high-voltage components.
• Helps reduce noise or arcing caused by a loose cover or bracket.
• Supports safe, reliable operation by keeping wiring and insulating parts in position.

• Disconnect power at the breaker or unplug the appliance before starting work.
• Handle high-voltage components and insulating parts carefully; avoid contact with charged parts.
• Use the OEM part number to fit and orientation before installation.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Secures the power cord to your microwave's chassis. Replace this bracket if it's cracked, broken, or missing to properly mount and support the cord.

Fixes loud grinding or coffee grinder noise from microwave. Simple DIY repair with 2 screws and wire connectors. Located on top, typically takes under 30 minutes.

Upper duct assembly for microwave ventilation systems. Mounts inside the cabinet to direct air flow. Replace if cracked, damaged, or missing components.

Flange nut for microwave magnetron mounting. Replace this hex nut if stripped, missing, or damaged during magnetron removal or appliance maintenance.

Microwave not heating? The magnetron generates microwave energy for cooking. Common repair when unit runs but won't heat food. Moderate DIY difficulty.

Fix a microwave with no power or intermittent shutoffs. This thermostat monitors temperature and protects internal components. DIY repair in 20 minutes.

Supports and guides the glass turntable in your microwave. Replace if the roller ring is cracked, broken, wheels are worn or missing, or the tray wobbles.

Replace your cracked, broken, or missing microwave glass cooking tray. This rotating turntable supports food for even heating in your microwave cavity.