Parts for Ge JVM1950SR1SS: 01 - Microwave Parts

Fix a microwave that stopped heating or made a loud noise. This high voltage transformer powers the magnetron. Moderate DIY repair for experienced users.

Fixes microwaves with no power or that stop mid-cycle. This thermostat switch monitors temperature and protects against overheating. Simple repair.

This temperature-control thermostat senses compartment heat with a capillary bulb and cycles the heating circuit to maintain your set temperature. Replacing a worn thermostat restores more consistent performance and helps correct underheating, overheating, and erratic temperature swings.

• Regulates heat to match the temperature you set
• Senses temperature via an integral capillary tube and sensor bulb
• Opens and closes contacts to control the heating element or burner
• Failure symptoms can include long warm-up, inaccurate temps, overheating, or uneven results

• Disconnect power and, if applicable, shut off gas; allow the unit to cool completely.
• Handle the capillary tube carefully—do not kink, crease, or cut it.
• Route the sensor bulb and tubing through original clips and path for accurate sensing.
• After installation, perform temperature calibration per service instructions if required.

Base plate for microwave ovens. Mounts at the bottom of the unit to provide structural support. Replace if cracked, warped, or damaged during installation.

Washered screw secures panels, brackets, and internal microwave components. Replace if screw is missing, stripped, or damaged to restore proper fit.

Fix uneven cooking or loud fan noise with this convection fan motor. Restores proper heat circulation in your microwave for consistent results.

Wire holder clip secures internal wiring in your microwave. Replace if wires are loose or rattling. Verify fit with your model number before ordering.

If your microwave is overheating or making loud grinding noises, the fan blade may be damaged. This part circulates air to cool internal components.

If your microwave runs with the door open or won't start when closed, this door latch body holds interlock switches in position for safe operation.

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

Symptoms of a failing Microwave Door Switch include:

• The microwave not starting or heating
• Running when the door is opened
• Unusual noises when the door is closed  

Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.  

Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.

Symptoms of a faulty monitor switch include:

• The turntable no longer rotates or spinning intermittently
• Cooking cycles aborting prematurely with error messages 
• Screeching or grinding noises emanating from beneath cavity
• Visible burnt spots on turntable drive assembly

This genuine GE switch is also compatible with select Hotpoint and RCA models.

The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any operational hazards.

Symptoms of a bad Lower Lever Switch include:

• The microwave not starting, indicating the door isn't recognized as closed
• The appliance operating with the door open, a clear safety hazard
• Unusual sounds or issues when attempting to start the microwave
• The need to apply extra pressure to keep the door closed

Common causes for a malfunctioning Lower Lever Switch can be attributed to mechanical wear from frequent use, damage incurred during cleaning or use, or internal issues affecting the switch’s activation mechanism.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Microwave turntable not turning? The turntable motor rotates the glass tray for even heating. Simple DIY repair with basic tools in under an hour.

Connects the turntable motor to the glass tray in your microwave. Replace if cracked, broken, or worn to restore smooth rotation and prevent slipping.

Magnetron cover shields internal microwave components from grease and debris. Replace if cracked, warped, broken, or missing to protect the magnetron.

Microwave stirrer blade distributes heat evenly during cooking. Replace if food heats unevenly or blade is damaged. Verify fit with your model number.

Stirrer blade holder for microwave ovens. Mounts inside the cavity to secure the waveguide stirrer fan. Replace if cracked, broken, or missing.

Mounting bracket for microwave ovens. Secures the unit to the wall or cabinet. Replace if bent, broken, or missing during installation or repair.

Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

This run capacitor helps the appliance motor start and run smoothly by storing and releasing electrical energy. Replacing a worn capacitor can restore reliable motor operation and reduce abnormal motor noise or cycling. What it does:

• Provides the brief power boost motors need to start and maintain RPM
• Helps stabilize motor voltage and improve run efficiency under load
• Commonly linked to symptoms such as motors that hum but won't start, slow or intermittent motor operation, or unusual motor noise
• Reduces stress on motor windings that can lead to premature failure when functioning properly

• One motor capacitor

• Always disconnect power at the breaker or unplug the appliance before servicing
• Capacitors can hold a charge; discharge safely
• Observe proper polarity and mounting location during installation; secure wiring and connectors

Replace burned-out halogen bulbs to restore bright interior or cooktop lighting. Essential when lights flicker, dim, or stop working. Verify fit with your model.

This lamp cover is the replacement light lens that protects and diffuses the appliance's interior lamp, restoring proper illumination and shielding the bulb from spills and debris. It helps keep the lamp visible and reduces hot-spot glare. What it does:

• Protects the interior lamp or bulb from food, moisture, and impacts
• Diffuses and directs light for more even interior illumination
• Prevents direct contact with the bulb for safer operation
• Replaces cracked, discolored, or missing lamp covers that cause poor lighting

• Disconnect power or unplug the appliance before starting any repair
• Handle carefully to avoid chipping or cracking the lens during installation
• Replace only with the correct cover to ensure proper fit and safe operation
• Do not operate the appliance with a damaged or loose lens in place

Microwave not heating? The magnetron generates the microwaves that heat food. Common repair for units that run but don't warm. DIY-friendly repair.

Microwave not heating? A failed magnetron assembly prevents heating and defrosting. This replacement part restores microwave energy generation.

Support plate that mounts and secures the power control module inside your microwave. Replace if cracked, broken, or missing to properly hold the control board.

Reduces electrical interference to prevent control issues and radio/TV static. Replace if microwave malfunctions or causes interference. Verify fit with your model.

Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.

Replace a noisy or non-working microwave vent fan with this ventilation motor. Fixes loud grinding sounds and poor exhaust performance. Moderate DIY.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

If your microwave won't power on or has intermittent electrical issues, a damaged power cord may be the cause. This replacement cord restores safe operation.

Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.

Fix poor venting or back-drafts in your over-the-range microwave with this hood damper assembly. Opens for exhaust airflow, closes to block drafts.

Bottom base panel for microwaves and microwave/hood combos. Replaces cracked, warped, or missing base panels. Structural support component.

Replace the bottom base panel of your microwave or microwave/hood combo. Needed when the existing panel is cracked, damaged, or missing. Restores structural support.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Glass light cover for microwave cooktop lights. Shields and diffuses bulb from heat, grease, and splatter. Replace if cracked, broken, or missing.

Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.

Restores safe power to your microwave light. Replace if socket is heat-damaged, loose, or lights won't turn on. Verify fit with your model number.

Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.

Filters grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or every 6 months. Confirm fit with your model number.

This wire oven rack provides a stable, heat-resistant surface for cookware and bakeware, restoring proper support and cooking alignment in your oven. Designed to slide into existing shelf tracks for everyday use. What it does

• Supports pots, pans and bakeware for even cooking and roasting
• Restores proper shelf height and prevents cookware from tipping
• Allows smooth sliding in and out of the oven on existing track guides
• Replaces bent, warped or missing oven shelving that interferes with cooking

• One wire oven rack

• Slide the rack into the oven's shelf guides until fully seated; no tools typically required
• Allow the oven to cool before handling and wear gloves to avoid sharp edges
• Verify correct orientation (flat side up) and that rack locks into track stops
• Check for bent guides or obstructions before forcing

Fix sensor cook cycles that won't adjust properly or show sensor errors. This humidity sensor monitors moisture levels for automatic cooking adjustments.

Rack holder supports and secures the metal cooking rack inside your microwave. Replace if cracked, broken, or missing to restore proper rack positioning.

Microwave won't heat or shuts off randomly? This thermostat regulates temperature and prevents overheating. Direct replacement part for most models.

Secures microwave components and mounting brackets. Replace this hardware assembly if screws are stripped, bolts are missing, or fasteners are damaged.

Plastic cap that covers and protects the door hinge assembly on your microwave. Replace if cracked, broken, or missing to restore proper door appearance.

Replaces a cracked, broken, or loose microwave door handle. Restores easy door opening and refreshes your appliance's appearance with a stainless finish.

Wire harness assembly for microwave ovens. Connects internal electrical components. Replace if wires are frayed, damaged, or connections are loose.

Cosmetic badge logo for your microwave door or control panel. Replace this emblem if the original is cracked, faded, peeling, or missing to restore appearance.