Parts for Ge LVM1750DP2BB: 01 - Microwave Parts

Replace your cracked, bent, or worn microwave door handle with this stainless steel assembly. Restores clean appearance and secure grip for opening.

Holds the light bulb securely in your microwave for proper interior illumination. Replace if bulb won't stay in place, socket is burned or cracked.

Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.

Replace your microwave's base bottom panel if the original is cracked, damaged, or missing. This structural component forms the lower chassis foundation.

Replace your microwave's bottom base panel if cracked, rusted, or damaged. This structural part forms the lower cabinet foundation and mounting surface.

The Air Filter is an OEM part for GE microwaves. This component is essential for trapping grease, smoke, and odors during cooking, maintaining a clean and safe kitchen environment. It is typically located above the cooking surface or within the microwa

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

Glass light cover for microwave cooktop lights. Shields and diffuses bulb from heat, grease, and splatter. Replace if cracked, broken, or missing.

Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.

Color: metallic. It measures about 6 inches wide by 4 inches deep.

Filters cooking odors, smoke, and grease from over-the-range microwaves. Replace when filter light activates or every 6-12 months. Confirm fit with model.

This run capacitor helps the appliance motor start and run smoothly by storing and releasing electrical energy. Replacing a worn capacitor can restore reliable motor operation and reduce abnormal motor noise or cycling. What it does:

• Provides th

Fix a microwave with no power. This thermal cutoff cavity (TCO) safety device prevents overheating by cutting power when temps exceed safe limits.

This latch body is the door latch component that secures the appliance door during operation, restoring reliable closure so cycles can run normally. Use it to replace a worn or damaged latch that won't hold the door closed. What it does:

• Engages

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.  

Causes of failure involve degradation

The Lower Lever Switch is an OEM replacement part for GE microwaves. This component activates the door interlock switch when the microwave door is closed. It ensures that the microwave only operates when the door is securely closed, preventing any oper

If your microwave heats unevenly or has hot and cold spots, a damaged stirrer blade is often the cause. This part distributes microwaves for even cooking.

Stirrer blade holder for microwave ovens. Mounts inside the cavity to secure the waveguide stirrer fan. Replace if cracked, broken, or missing.

Plastic cover that shields the stirrer assembly inside your microwave. Replace if cracked, melted, broken, or missing to protect internal components.

Connects the turntable motor to the glass tray in your microwave. Replace if cracked, broken, or worn to restore smooth rotation and prevent slipping.

Microwave turntable not turning? The turntable motor rotates the glass tray for even heating. Simple DIY repair with basic tools in under an hour.

Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

Mounting bracket for microwave ovens. Secures the unit to the wall or cabinet. Replace if bent, broken, or missing during installation or repair.

Plastic cover that fits over the air damper assembly to help direct airflow. Replace if your original cover is cracked, broken, worn, or missing.

Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

Power cord assembly for microwave ovens. Supplies electrical connection from wall outlet to unit. Replace if cord is frayed, damaged, or missing.

Outer door panel for your microwave. Replaces chipped, cracked, or damaged exterior door frames. Restores clean appearance and door structure.

Fixes microwaves with no power or that stop mid-cycle. This thermostat switch monitors temperature and protects against overheating. Simple repair.

Microwave not heating? The magnetron generates the microwaves that heat food. Common repair for units that run but don't warm. DIY-friendly repair.

Microwave won't heat or power on? This bottom thermal cut-off protects against overheating by cutting power when excess heat is detected. Easy fix.

Microwave runs but won't heat food? This high-voltage transformer powers the magnetron to generate heat. Restores cooking function when failed.

Base plate assembly for over-the-range microwaves. Provides structural mounting support. Replace if cracked, broken, or missing during installation.

Microwave not heating? A failed magnetron assembly prevents heating and defrosting. This replacement part restores microwave energy generation.

Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.

Supports and guides the microwave turntable ring for smooth rotation. Replace if cracked, broken, or wheels keep falling off causing alignment issues.

The Glass Tray is an OEM part for GE microwaves. This tray holds food items and rotates them during the cooking process to ensure even heating. It fits into the turntable mechanism, allowing the food to be cooked uniformly.

Causes of a bad glas

Secures microwave components and mounting brackets. Replace this hardware assembly if screws are stripped, bolts are missing, or fasteners are damaged.

Wire harness for microwaves. Connects internal electrical components. Replace if wires are frayed, damaged, or connections are loose or broken.

Washered screw secures panels, brackets, and internal microwave components. Replace if screw is missing, stripped, or damaged to restore proper fit.

Flat bolt fastener for securing microwave to cabinets or wall brackets. Replace missing, stripped, or corroded mounting hardware to restore secure installation.

Complete microwave door assembly. Replaces cracked, broken, or damaged doors. Includes handle and frame. Direct fit replacement for worn or missing doors.

Front grille cover for microwaves. Replaces cracked, broken, or damaged grilles on the front exterior. Essential cosmetic part to restore appearance.

Direct replacement noise filter assembly for microwaves. Reduces electrical interference. Replace if cracked, damaged, or missing to restore clean power.

Support plate that mounts and secures the power control module inside your microwave. Replace if cracked, broken, or missing to properly hold the control board.

Replacement control panel cover for microwave ovens. Restores the front console's appearance and protects controls from spills. Needed when cracked or broken.

This condenser fan motor circulates air across the condenser coils to help the refrigerator release heat and run efficiently. Replacing a worn motor restores proper airflow and can improve cooling performance. What it does:

• Spins the condenser fan blade to expel heat from the condenser coils
• Helps maintain correct compressor and system temperatures
• Runs continuously or with the compressor depending on the model
• Common symptoms: refrigerator running hot, poor cooling, loud or grinding noises from the rear, or fan not spinning

• One condenser fan motor

• Disconnect power to the appliance before servicing to avoid electrical shock
• Typical installation requires basic hand tools and access to rear or bottom rear panel
• If the fan blade is damaged or obstructed, replace or clear obstructions while motor is removed

This spring blade is a small metal tension spring that restores proper tension and movement in the appliance's linkage or latch assembly. It replaces worn or broken blades to help restore normal door or component action. What it does:

• Provides tension and return force in linkage, latch or lever assemblies
• Helps stop sagging, slipping or loose movement in the affected mechanism
• Can reduce related rattling or binding caused by a worn spring blade
• Restores reliable engagement where a broken or fatigued blade allowed failure

• Unplug the appliance or shut off power before starting any repair
• Verify orientation and engagement of the blade before final assembly
• Use proper hand tools; the blade may be under tension—wear safety goggles and gloves
• If the assembly uses multiple springs, replace all worn parts to ensure balanced function

Wire holder clip secures internal wiring in your microwave. Replace if wires are loose or rattling. Verify fit with your model number before ordering.

Cosmetic badge logo for your microwave door or control panel. Replace this emblem if the original is cracked, faded, peeling, or missing to restore appearance.

Replacement control panel sub-assembly for your microwave's front console. Installs to house the touchpad, control board, and display connections.

Wire harness assembly for microwave ovens. Connects internal electrical components. Replace if wires are frayed, damaged, or connections are loose.

Lamp bracket for microwave interior lighting assembly. Secures the bulb housing in place. Replace if bracket is cracked, broken, or missing.

Fix sensor cook cycles that won't adjust properly or show sensor errors. This humidity sensor monitors moisture levels for automatic cooking adjustments.

Wire harness for microwaves. Connects electrical components inside the unit. Replace if wires are damaged, frayed, or connections are loose or broken.