Parts for Ge PEM31DM1BB: 01 - Microwave Parts

Microwave won't turn on or suddenly stopped working? A blown fuse is often the cause. Requires removing outer cover to access and replace the fuse.

Microwave turntable stopped spinning or rotating? This turntable motor drives the glass tray for even heating. DIY-friendly replacement restores rotation.

This is a replacement wire harness A assembly that routes power and signals between controls and components to restore reliable electrical connections and proper operation. Designed to replace a damaged or worn wiring harness. What it does:

• Provides the factory wiring connections between the control, switches and key components.
• Restores power/signal continuity when a damaged harness causes intermittent operation or non-responsive controls.
• Helps eliminate arcing, shorts or burning smell caused by frayed or broken wires.
• Maintains correct connector fit and routing to prevent strain on terminals.

• Disconnect power before starting any repair to avoid shock or injury.
• Inspect connectors and mating terminals for damage; replace if corroded or burned.
• Route and secure the harness to match the original routing; avoid sharp edges and pinch points.

Microwave won't heat or shuts off during use? This magnetron thermostat senses temperature and controls heating. Moderate DIY fix with basic tools.

Fix sensor cook cycles that won't adjust properly or show sensor errors. This humidity sensor monitors moisture levels for automatic cooking adjustments.

Secures the temperature sensor in your microwave. Replace if sensor is loose, misaligned, or causing erratic heating. Confirm fit with your model number.

Secures components inside the microwave frame to keep assemblies aligned and stable. Replace if your original bracket is bent, cracked, or missing.

Fix a microwave door that won't open or close properly. This door latch assembly replaces broken plastic pegs and tabs. Moderate DIY repair with careful switch reconnection required.

Fix a microwave door that won't open or close properly. This door latch assembly replaces broken plastic pegs and worn components. Moderate DIY repair.

Door lever for microwave ovens. Installs on the door latch assembly to operate the release mechanism. Replace if broken, cracked, or missing.

Replacement drive coupler for microwave turntable systems. Connects motor to turntable shaft. Replace if cracked, stripped, or broken to restore rotation.

White plastic clip plug for microwave interior. Installs to secure components or cover mounting holes. Order a replacement if original is cracked or missing.

Outer mounting clip secures microwave components in place. Replace if broken, cracked, or missing to restore proper fit. Verify compatibility with your model.

Plastic clip plug that secures the outer case panel on your microwave. Replaces broken, cracked, or missing clips to properly fasten cabinet panels.

Outer case guard for microwaves. Protects internal components and provides structural support. Replace if cracked, dented, or damaged for proper fit.

Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.

Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.

Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.

This Bracket HVC is the OEM mounting bracket that secures the HVC assembly in place, keeping related components aligned and reducing vibration or movement for reliable operation. What it does

• Secures the HVC assembly or housing to the appliance frame to prevent shifting or loosening
• Helps maintain proper alignment of adjacent components for consistent performance
• Reduces vibration and rattling that can occur when a bracket is missing or damaged
• Commonly replaced when the HVC housing is loose, noisy, or does not sit flush

• One Bracket HVC mounting bracket

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Basic hand tools are typically required; handle metal edges carefully to avoid cuts
• Inspect mounting screws or clips and replace if worn to ensure a secure fit

Black plastic foot that supports and stabilizes your microwave. Installs on the bottom corners. Replace if cracked, broken, or missing for proper leveling.

Base plate assembly for microwaves. Installs at the bottom to support internal components. Replace if cracked, broken, or damaged during service.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

Replace your microwave's power cord assembly if the original is damaged, frayed, or missing. Plugs into the back of the unit for electrical connection.

Color: brown. Measures about 8 inches in diameter.

Protects and directs airflow for proper ventilation and cooling. Replace if cracked, damaged, or missing to restore sealed airflow paths. Confirm fit with your model.

Replace your cracked, broken, or shattered microwave glass turntable tray. This clear rotating cooking tray installs on the guide roller inside.

Complete microwave door assembly that includes the outer panel, inner liner, window, and handle. Replace this part if your door is cracked, broken, or worn.

Complete door assembly for your microwave. Replaces a cracked, damaged, or broken door unit. Includes handle and mounting components for installation.

White microwave door assembly that replaces damaged, cracked, or broken doors. Includes outer panel and window. Direct replacement for worn units.

Replace your microwave's door latch spring if broken, worn, or missing. This small spring ensures proper door mechanism operation and secure closure.

Fix a microwave door that won't close or latch properly with this door latch assembly. Solves issues with doors not staying shut or secure during operation.

Complete microwave door assembly that attaches to the front of your microwave. Replace if your door is cracked, damaged, warped, or the seal is compromised.

Replacement touch pad for your microwave control panel. Install this membrane switch when the original is cracked, worn, unresponsive, or missing buttons.

Color: Bisque

White push button for microwave control panel. Replace this button if yours is cracked, broken, stuck, or missing to restore full control panel functionality.

Color: Black

Translucent lens that covers and protects your microwave's control panel buttons and display. Replace if cracked, cloudy, yellowed, or missing.

Mounting bracket for microwave installation. Secures microwave to wall or cabinet. Replace if bent, broken, cracked, or missing for proper support.