Parts for Lg WT7300CW/02: Outer Case Assy Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This damper controls airflow into the refrigerator compartment to maintain even temperatures and proper cooling. Replaces a worn or stuck damper to help restore correct air distribution and reduce temperature swings. What it does:

• Opens and closes the air inlet to regulate cold air from the freezer into the fridge compartment
• Helps maintain even temperatures and prevents sections from becoming too warm or too cold
• Commonly replaced when damper is stuck, noisy, or not responding and fridge temperatures fluctuate
• Works with the fridge's control system to modulate airflow as needed

• One damper assembly

• Disconnect power before beginning any repair to avoid electrical shock
• Access typically requires removing interior panels or trim in the refrigerator compartment; keep fasteners organized
• Verify actuator orientation and proper linkage engagement before reassembly

This holder assembly is a direct replacement mounting bracket that secures refrigerator internal components so they stay properly positioned and function reliably. Replaces a cracked or loose bracket to restore stable support and reduce rattling. What it does

• Secures internal components or assemblies to the cabinet to prevent shifting and vibration
• Restores proper alignment when a cracked or broken holder causes loose parts
• Helps stop rattling, knocking, or intermittent contact caused by a failed mount
• Works as a structural replacement—matches OEM fit and mounting points

• One holder assembly

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove nearby shelves, bins, or trim for access as needed; keep small fasteners organized
• Typically installs with basic hand tools; do not overtighten fasteners to avoid cracking
• If the part attaches to electrical components, verify connectors are secure before restoring power

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

This hardware washer sits beneath a screw or nut to spread load and help keep fasteners tight inside your appliance. Replacing a bent or missing washer restores a secure fit and can reduce vibration-related noise. What it does:

• Distributes clamping force to protect mounting surfaces
• Helps resist loosening from vibration and movement
• Restores proper alignment when a washer is damaged or missing
• Common symptoms: loose or wobbling parts, rattling noises, screws backing out

• 1 washer

• Disconnect power; if working on a washer, also turn off water supply
• Note the original hardware stack order and take photos for reference
• Place the washer between the fastener head or nut and the part being secured
• Tighten to manufacturer guidance; avoid overtightening to prevent damage

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

This front panel assembly replaces a damaged or worn control panel fascia to restore the appliance's front appearance and secure the control components. It provides the mounting surface and openings for buttons, displays, and controls. What it does:

• Replaces cracked, broken, or warped front panel fascia that affects appearance or button access
• Restores proper mounting for control buttons and display windows
• Helps prevent debris from entering the control area and protects underlying electronics
• Useful when panel tabs or screw bosses are broken and the panel no longer secures correctly

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Handle the panel carefully to avoid scratching painted or glass surfaces; use gloves if needed.
• Removal typically requires removing trim and screws; keep hardware organized for reassembly.

This genuine hardware washer installs at the specific joint shown in your model's parts diagram. It spreads clamp force and keeps the connection aligned and secure to support smooth operation of the related component. What it does:

• Distributes fastener load and protects mating surfaces from damage
• Maintains proper spacing and alignment within the assembly
• Helps resist loosening from vibration over time
• Clues it may be needed or worn: loose/rattling parts, unusual vibration or noise, or visible wear at the fastener location; on some models, seepage at that joint

• 1 washer

• Disconnect power and turn off water supply before servicing
• Support the assembly, remove the fastener, and install the washer in the same orientation
• Tighten the fastener snugly without overtightening; replace any damaged bolts, nuts, or seals

This knob assembly is the replacement rotary control used to select settings on the appliance. It restores a worn, cracked, or missing knob to make dialing controls easy and accurate again. What it does:

• Replaces a damaged or missing control knob so you can select cycles, temperatures, or settings
• Provides a secure grip and tactile detents for reliable user control
• Helps stop slipping or loose operation caused by worn knobs or stripped splines
• Restores the appliance's original look and usability

• Turn off and unplug the appliance (or disconnect power) before replacing the knob.
• Pull the old knob straight off the control shaft; push the new knob onto the shaft until it seats.
• If the knob does not fit, do not force it—verify spline alignment and part compatibility.

The PCB Assembly Main is an OEM part for LG washing machines. As the central control unit, this printed circuit board regulates all functions of the washer including cycle selections, temperatures, spin speeds, and diagnostic systems.

Causes of a bad main PCB include natural wear and tear over time, moisture damage, power surges, or fluctuations that compromise electronic components. 

Symptoms of a failed PCB assembly include:

• The washer not starting or powering on at all  
• Inability to select or change wash cycles
• Error codes displayed
• No response from control buttons and displays

This LG replacement part is also compatible with select Sears/Kenmore models. 

The PCB Assembly is an OEM part for LG refrigerators. It stands for Printed Circuit Board, which is the main control board that manages and regulates various functions and components within the refrigerator.

Symptoms of a bad PCB Assembly include:

• The refrigerator not powering on or displaying any lights/indicators
• Specific components or features not functioning correctly (ice maker, dispenser, cooling, etc.)
• Error codes or warning lights illuminated on the control panel
• Strange noises or abnormal behavior from the refrigerator

Causes of a bad PCB Assembly can be related to electrical faults, such as short circuits, power surges, or component failures. Physical damage from impact, moisture exposure, or overheating can also contribute to the malfunction of the PCB.

This OEM LG part is also compatible with Sears/Kenmore refrigerators. 

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Drain Hose is an OEM part for LG washing machines. This hose is essential for directing used water out of the washing machine and into the household drain system, ensuring efficient water removal after each wash cycle. The hose measures 67.5 inches in length.

Causes of a bad drain hose can include wear and tear from repeated use, blockages from debris or lint, or physical damage such as cracks or splits. A compromised drain hose can lead to water leakage, improper drainage, or even flooding.

Symptoms of a bad Drain Hose include:

• Water not draining properly from the washing machine
• Leaks or puddles of water around the washing machine
• Visible cracks or splits in the hose
• Unusual sounds during the draining process

This OEM LG part is also compatible with Sears/Kenmore models.

This is a factory replacement parts assembly designed to restore proper fit and function of a specific component group in your appliance. Use it to replace a worn, damaged, or missing original assembly and maintain reliable operation. What it does:

• Provides a complete, preassembled component group specified by the manufacturer
• Restores proper alignment, support, and operation of the associated parts
• Helps resolve issues like looseness, rattling, misalignment, or intermittent function
• Direct-fit replacement engineered to match the original design

• One parts assembly

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Refer to your model's service documentation for the exact location and procedure
• Handle sharp edges and components carefully; wear cut-resistant gloves
• Verify correct operation before final reassembly

This guide cover is a molded trim piece that shields and supports its mating guide/track, helping the assembly align and operate smoothly while protecting internal components from debris and damage.

• Protects the guide/track from wear and debris intrusion
• Helps maintain smooth alignment and operation of the moving assembly
• Can help resolve issues like rubbing, misalignment, or a loose/missing trim piece
• Restores a clean, finished look after damage or loss

• Unplug power and shut off water before servicing
• Compare the new cover to the original to confirm orientation
• Snap or screw into place per the unit's service manual; do not force
• Verify smooth travel and clearance after installation

The Lid Switch and Lock Assembly is an OEM component specifically designed for LG washing machines. It contains both the switch that detects when the lid is closed, as well as the metal lock mechanisms that securely engage the lid during active cycles. This switch contains a 47-inch wire harness with 6-pin plugs.

Symptoms of a bad lid switch and lock assembly include:

• The washer not starting or agitating with the lid open
• Inability to fully close or lock the washer lid
• Error codes related to sensed lid position issues

Causes of failure involve wear of lock moving parts combined with mechanical and electrical degradation over thousands of uses. Continuous hinge motions and detergent/cleaner exposure take their toll.

This Lid switch is also compatible with Kenmore units reliant on LG parts.

The Tub to Pump Hose Assembly is an OEM part for LG washing machines. This hose connects the tub to the drain pump, allowing water to be efficiently drained from the washing machine during the spin and drain cycles.

Over time, the hose can become clogged, develop cracks, or experience wear due to constant water flow and agitation. Damage can also occur from accidental mishandling or impact, leading to leaks or improper drainage.

Symptoms of a bad Tub to Pump Hose Assembly include:

• Water leaking from the washing machine
• Slow or incomplete drainage
• Error codes related to drainage issues
• Excess water remaining in the tub after the cycle

This OEM LG part is also compatible with Sears/Kenmore.

The Detergent Box Assembly is an OEM part for LG washing machines. This part holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle, ensuring effective cleaning and care for your laundry.

Common causes of a bad detergent box include clogging or blockage from detergent residue, wear and tear from regular use, or damage to the dispenser mechanisms.

Symptoms of a bad Detergent Box Assembly include:

• Detergent, fabric softener, or bleach not dispensing properly
• Residue build-up in the detergent drawer
• Leaks or drips from the detergent box area
• Error codes related to detergent dispensing

This OEM LG part is also compatible with some Kenmore models.

The Softener Cap is an OEM part for LG washing machines. It serves as the lid and housing for the internal water softener that prevents mineral deposits from building up. The softener cap funnels water to and from the softener compartment during various stages of the wash cycle.

Causes of a faulty softener cap can include cracked or degraded seals over extended usage, impact damage distorting fit, or harsh cleaners affecting plastics over time.

Symptoms of a bad softener cap include:

• Water leaks from around the softener area  
• The cap not closing or sealing properly 
• Mineral buildup occurring prematurely
• The softener not functioning as intended

This genuine LG replacement is compatible with Sears/Kenmore machines.

This softener cap seals and directs fabric softener from the dispenser so it dispenses correctly during the wash cycle. Replacing a worn or cracked cap helps prevent leaks and ensures the softener flows into the drum at the right time. What it does:

• Seals the fabric softener reservoir to prevent drips and leaks during filling and storage
• Guides softener into the rinse cycle so the appliance dispenses at the proper time
• Replaces cracked, warped, or missing caps that cause leaking or improper dispensing
• Restores a secure fit between the dispenser assembly and the softener reservoir

• One softener cap

• Unplug the appliance or disconnect power before servicing
• Remove the dispenser drawer or housing to access the cap
• Press or snap the cap into place until fully seated; do not force or overtighten
• Inspect dispenser for residue or damage and clean before reinstalling

This replacement nozzle assembly restores proper flow and distribution within the appliance's system to maintain cleaning performance. Replace a cracked, clogged, or worn nozzle to help prevent performance loss and keep the unit operating efficiently.

• Directs and concentrates flow through the appliance for effective operation
• Helps maintain a sealed path to avoid leaks or loss of performance
• Damage or obstructions can cause reduced cleaning results, unusual noise, or visible leaks/air leaks
• Visible cracks, warping, or a loose connection indicate the nozzle should be replaced

• Disconnect power (and water supply if applicable) before servicing
• Remove the old nozzle per your model's service information; clear any debris from the mating areas
• Inspect related seals/gaskets and replace if worn to ensure a proper seal
• Install the new nozzle securely and test for proper operation and leaks/airflow

The Clutch Coupling & Housing Assembly is an OEM component for LG front-loading washers. This assembly contains the clutch coupling that links the motor to the drive components to rotate the washing drum. 

Symptoms of a bad clutch coupling include:

• The washing machine fails to agitate or spin clothes  
• Grinding or clanking noises occur during cycles
• The drum does not turn properly or feels obstructed
• Excessive vibration when spinning 

Causes of failure can be wear and tear over time, damage from loads that are too heavy or unbalanced, or debris buildup inside the housing.

Replace yours today with this genuine OEM LG assembly to restore optimal operation and prevent further wear. This replacement part is compatible with some Samsung, Frigidaire, and Kenmore models.

The Valve Assembly Inlet is an OEM part for LG washing machines. It controls the flow of water into the washer, allowing the machine to fill with the correct amount of water for each cycle. This ensures that your washer operates efficiently and effectively.

Over time, inlet valves can wear out or become damaged due to mineral deposits, electrical issues, or regular wear and tear.

Symptoms of a bad valve assembly inlet include:

• The washer not filling with water
• Slow or irregular water flow
• Water leaking from the valve area
• Error codes related to water intake on the washer's display

This OEM LG part is also compatible with Sears/Kenmore models.

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

This inlet hose channels household water into the appliance during the fill cycle. Replacing a cracked, brittle, or leaking hose restores a secure, leak-resistant path that helps prevent puddles and fill-related interruptions. What it does:

• Routes incoming water from the inlet valve into the appliance's internal water path
• Helps maintain a watertight connection when properly secured with clamps
• Typical failure signs: dripping or puddling under the unit, visible cracks/kinks/bulges, or lingering dampness
• A restricted or leaking hose can contribute to long fill times or incomplete cycles

• 1 inlet hose

• Disconnect power and turn off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note the original routing and clamp locations; install the new hose the same way without twists or kinks
• Fully seat hose ends and secure clamps; restore water and run a brief fill to check for leaks

Detergent housing assembly that holds and routes detergent to the washer dispenser, helping ensure proper detergent flow and reducing leaks or dispenser jams. Fits into the dispenser area to replace cracked, warped, or damaged housing components. What it does:

• Houses and channels liquid or powdered detergent into the dispenser and wash chamber
• Restores proper detergent release when the original housing is cracked, broken, or warped
• Helps stop leaks and detergent buildup around the dispenser area
• Works with the dispenser drawer and related seals to maintain correct flow

• Disconnect power and turn off the water supply before starting service
• Use basic hand tools and follow the washer service manual or OEM diagram for disassembly/reassembly
• Inspect and replace any worn seals or gaskets at reassembly to prevent leaks

The Stator Assembly is an OEM part for LG washing machines. The stator generates electromagnetic power to turn the drum at appropriate speeds during each cycle stage.

Causes of a bad stator include cracked or degraded insulation over time allowing current leakage. This prevents stable drum rotation and consistent cycles.

Symptoms of a faulty stator involve:

• Drum failing to turn or move during the wash cycle
• Abnormal noises coming from the drive motor area
• Inability to advance cycles normally through settings

This OEM LG part is also compatible with some Kenmore models.

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

A standard replacement bolt used to secure appliance panels and internal assemblies. This OEM-style fastener restores proper fit and reduces movement that can cause noise or misalignment in appliance components. What it does:

• Fastens panels, brackets, and components to maintain structural integrity
• Keeps moving parts aligned to help prevent rattling or vibration
• Replaces missing, loose, or corroded bolts that compromise fit
• Suitable where a standard machine/sheet-metal bolt is required

• One bolt

• Disconnect power and water before servicing the appliance
• Use the correct driver/socket to avoid stripping the head or threads
• Tighten securely but avoid over-torquing; replace any damaged nuts or washers
• Inspect mating threads and clean or chase threads if corroded

The Power Cord Assembly is an OEM part for LG washing machines. It allows the washer to receive power from the wall outlet during operation. The power cord assembly consists of the wiring that transmits electricity from the power source and into the washer's electrical control panel. 

Causes of a bad power cord assembly can include fraying of the insulation over time, cracks or breaks in the wiring, or loose connections that disrupt the flow of electricity. 

Symptoms of a bad power cord assembly include:

• The washer not receiving power and failing to turn on
• Buzzing or humming noises coming from the power cord area  
• Tripped breakers or blown fuses
• Shock or electrical hazards 

This OEM LG part is also compatible with Sears/Kenmore. Replacing a damaged or defective power cord assembly prevents electrical issues and unsafe conditions. 

The Motor Assembly is an OEM part for LG washing machines. This motor assembly is responsible for driving the rotation of the drum during the wash and spin cycles. It provides the necessary power and torque to ensure smooth and efficient operation, allowing your clothes to be thoroughly cleaned.

Symptoms of a bad motor assembly include:

• Drum not spinning or rotating properly
• Unusual noises during operation
• Error codes related to the motor

A bad motor assembly can occur due to electrical issues, mechanical failure, or other internal malfunctions. If you notice symptoms such as the drum not spinning or rotating properly, unusual noises coming from the washer during operation, or error codes related to the motor, it may be time to replace the motor assembly.

This LG replacement part is also compatible with select Kenmore models.
 

This multi-connector wiring harness routes power and signals between appliance controls and components, restoring reliable connections for proper operation. It replaces a damaged or worn harness to help resolve intermittent power or control issues. What it does:

• Links control board, sensors, and motors through multiple molded connectors
• Transfers power and low-voltage signals needed for normal appliance operation
• Commonly used to address intermittent electrical faults, unresponsive controls, or components that fail to receive power
• Provides factory-style connector fit to simplify reconnection during repairs

• Disconnect power (unplug or disconnect breaker) before starting any repair.
• Confirm connector orientation and seating before reapplying power; match keyed connectors only to their mating plugs.
• Inspect connectors and wiring routing for chafing or damage; replace if any wires or terminals are compromised.

The Noise Filter is an OEM part for LG Washers. This part is responsible for reducing electrical noise and interference from the incoming power supply. It filters out unwanted electrical signals and prevents them from affecting the performance of your washing machine. It helps to maintain a stable power supply, minimizing the risk of electrical disruptions during the wash cycle.

A bad Noise Filter can occur due to power surges, electrical faults, or general wear and tear over time. If the noise filter board becomes faulty, you may experience issues such as excessive electrical noise, interference, or even complete power failure.

Symptoms of a bad Noise Filter include:

• Loud electrical buzzing or humming noises during operation.
• Random power fluctuations or interruptions.
• Inconsistent or erratic behavior of the washing machine controls.

If you're experiencing any of these issues, it's time to replace the Noise Filter with this genuine LG part to restore the electrical stability and performance of your washing machine. This OEM LG part can also be used on Kenmore/Sears appliances.
 

This multi wiring harness routes power and control signals between the appliance control and multiple components, restoring proper electrical connections and reliable operation. Use when damaged wiring or connectors cause intermittent or no function. What it does:

• Links the main control board to sensors, switches, motors or other components via pre-terminated connectors
• Replaces frayed, burnt or broken wires that can cause intermittent operation or component failure
• Helps restore lost power or signal to affected circuits
• Prevents arcing and poor connections caused by damaged terminals

• One multi wiring harness as shown

• Disconnect power (unplug or shut off breaker) before starting any repair
• Label or photograph connector locations to ensure correct reassembly
• Inspect mating connectors and terminals for damage; replace if corroded or melted
• Route and secure the harness away from heat sources and moving parts; avoid pinching or sharp edges

This is a common nut used to secure appliance components and fasteners, restoring a tight connection for safer, quieter operation. Replaces a worn or missing nut to help stop loose panels, rattling, or shifting parts. What it does:

• Secures brackets, panels, or fasteners to keep components properly mounted
• Restores clamping force to prevent vibration-related noise
• Helps stop loose or wobbly parts that can lead to component wear
• Small hardware replacement for routine repairs and reassembly

• Disconnect power and water before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Thread onto matching bolt stud; tighten until snug—do not overtighten
• If threads are damaged, replace both nut and mating fastener

This is a small flat hardware washer used with fasteners to distribute load and prevent loosening on appliance assemblies. It helps keep screws and bolts seated for a secure, stable connection. What it does

• Sits under a screw or bolt head to spread pressure and protect the mating surface
• Helps prevent fasteners from pulling through soft or thin materials
• Reduces loosening from vibration when paired with the correct screw or bolt
• Can eliminate play or rattling where a missing washer allowed movement

• One flat washer as pictured

• Disconnect power before servicing the appliance and follow manufacturer safety instructions
• Replace only with the same style and size washer for proper fit and function
• Hand tools are normally sufficient; ensure fasteners are tightened to the OEM recommendation
• If multiple washers are missing or damaged, inspect surrounding hardware for wear

This coupling assembly connects the washer motor to the transmission so the tub can agitate and spin. Replacing a worn or broken coupling restores drive power and stops slipping between motor and gearcase. What it does

• Transfers motor torque to the washer transmission for agitation and spin
• Worn or broken coupling can cause no spin/no agitate or a slipping/jerky drive
• Failing coupling may produce grinding, clunking, or loud noise during cycles
• Designed to shear under severe load to protect the motor and gearcase

• One coupling assembly

• Disconnect power before starting any repair and work on a stable, level appliance
• Access typically requires removing the washer cabinet or rear access panel; follow your model's service information
• Inspect motor output shaft and transmission input for damage; replace other damaged parts as needed
• Tighten fasteners to OEM torque and test with a short cycle after reassembly

The Coupling Washer is a genuine OEM part for LG washing machines. As a crucial component connecting the drive motor to the inner drum, the coupling washer allows for the transmission of rotational force during the spin cycle. This rotational movement generated by the drive motor is what extracts water from clothing, effectively drying clothes. 

Symptoms of a bad coupling washer include:

• The washing machine fails to spin or rotates very slowly
• Vibrations and noise during spinning
• Rubber couplings tearing or shredding prematurely

Over time, the constant exposure to vibrations and forces during spin cycles can cause the rubber material of the coupling washer to deteriorate. 

This OEM LG part is also compatible with Sears/Kenmore washers.

This Cover Cap is a small trim piece that restores a finished appearance and protects underlying hardware on the appliance. It snaps into place to hide fasteners and prevent dirt buildup for a cleaner look. What it does:

• Covers and protects exposed screws, clips, or openings on the appliance cabinet or control area
• Restores a finished, factory appearance after repair or panel replacement
• Helps keep debris and moisture away from fasteners and internal edges
• Reduces the chance of snagging or accidental contact with sharp panel edges

• Disconnect power to the appliance before starting any work
• Typically installs by snapping into the panel opening or over the fastener; may require gentle prying with a trim tool
• Replace the cap to maintain proper fit and protection of the surrounding trim
• Compare the old part to this cap before installation

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.