Bosch Freezer GSD2201 Parts
Genuine Ge part
By: Ge
Part Number: WD21X10268
The Solenoid and Bracket Assembly is an OEM replacement part for GE dishwashers. This component plays a role in controlling the flow of water during the dishwashing cycles, allowing for proper water distribution and efficient cleaning.
Symptoms that may indicate the need to replace the solenoid and bracket assembly include:
- Issues with water not filling or draining properly
- Inconsistent or incomplete water circulation during cycles
- Visible leaks or water damage around the solenoid area
Causes of a faulty solenoid and bracket assembly can include normal wear and tear over time, electrical malfunctions, mineral buildup or debris obstructing the solenoid, or physical damage to the component.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
Dishwasher would not drain Larry H. • Navasota , TX • July 18, 2016
Replaced the solenoid and bracket assembly
Read more
More
$39.44
- Compare At:
-
$47.33
- You Save:
-
$7.89
Genuine Ge part
By: Ge
Part Number: WD35X21038
Replacement roller and axle kit for dishwasher lower racks. Includes 8 wheels and 8 axles. Replace when rollers are broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Dishwasher lower rack wheels were melted/broken and the rack wouldn't roll the washer would make a loud clunking noise while aggitating one of the rubber top tub restraints were broken Joseph Z. • Louisville , KY • September 23, 2016
I never respond to these kinds of requests but I must respond to this one because of your superior service!
The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too.
The dishwasher wheels replacement didn't require tools & took less than 15 minutes.
The original design/materials are not very...
Read more
More
$49.51
- Compare At:
-
$58.92
- You Save:
-
$9.41
Genuine Ge part
By: Ge
Part Number: WD08X10057
Seals dishwasher door to prevent leaks during wash cycles. Replace if worn, torn, or causing water leakage. Press-fit installation, no glue needed.
Do-It-Yourself Stories from Customers like You
Water and soap leaking from door of our old GE profile performance dishwasher Wayne T. • Haines City , FL • June 10, 2018
My wife is attached to her old, simple, no bells and whistles dishwasher. When it started leaking from the bottom of the door, I looked up the possible fix and thought the price of the gasket probably out-valued the dishwasher. I thought that it was time to buy a new one. After looking at the prices of dishwashers (even with a Memorial Day sale) I was shocked at high they have gotten. The price of the gasket, which isn't even a third of the price of a bottom of the line DW, was looking even...
Read more
More
$79.72
- Compare At:
-
$107.94
- You Save:
-
$28.22
Genuine Ge part
By: Ge
Part Number: WD21X10261
The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.
Symptoms of a faulty interlock switch include:
- Dryer failing to start or running with the door open
- Timer display not illuminated when start button is pressed
- Inability to open the dryer door during operation
- Dryer suddenly stopping mid-cycle before fully drying clothes
Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance.
This genuine GE switch is compatible with Hotpoint and RCA dryers as well.
Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.
Do-It-Yourself Stories from Customers like You
Melted door switch. Christopher K. • Greeneville , TN • February 03, 2024
The full story:
Dishwasher stopped running mid-cycle. When I first began troubleshooting I tried manually advancing the timer knob, and the machine would run. That led me to believe that the actual timer assembly was bad, so I replaced it. The dishwasher ran fine for a day, and then the same problem came back. This time, however, I also had to push in on the door to get it to run. I looked around online, and someone suggested that the door latch wasn't closing tightly enough. I adjusted the...
Read more
More
$37.32
- Compare At:
-
$44.04
- You Save:
-
$6.72
Genuine Ge part
By: Ge
Part Number: WD26X10013
Dishwasher not draining or leaving water in the bottom? This pump and motor assembly circulates and drains water. 2-hour DIY repair with video guide.
This part fixes the following symptoms
-
Won't start
-
Noisy
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
It wasn`t pumping the water out Jimmy N. • Louisville , KY • August 05, 2014
I fixed it by installing a ge pump and motor assembly. it works fine
Read more
More
$198.72
- Compare At:
-
$263.74
- You Save:
-
$65.02
Genuine Ge part
By: Ge
Part Number: WD14X10009
The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.
Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door.
Symptoms of a bad Hinge Arm Link include:
- Difficulty opening or closing the dishwasher door
- A door that won't stay closed or opens unexpectedly
- Visible wear or damage to the hinge arm link, such as bending, breaking, or severe wear marks
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The hinge arm link broke Ronald I. • Las Vegas , NV • March 02, 2015
I watched the repair video and ordered the part ( I luckily ordered two links). The video was not exactly for my model dishwasher but I did follow the instruction for removal from the cabinet. Since my model was not shown, I was looking to see how the door spring and the Hinge Arm Link was supposed to be set up. I had the impression that the door spring and link was only on the right side of the dishwasher. I finally figured it out and took pictures of the set-up for the next time the link...
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Ge part
By: Ge
Part Number: WD15X10003
Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.
Do-It-Yourself Stories from Customers like You
Leaky inlet valve for dishwasher Don S. • Battle Creek , MI • April 22, 2014
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes.
Read more
More
$78.27
- Compare At:
-
$93.14
- You Save:
-
$14.87
Genuine Ge part
By: Ge
Part Number: WD16X10011
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$20.57
- Compare At:
-
$24.68
- You Save:
-
$4.11
Genuine Ge part
By: Ge
Part Number: WD12X10284
The Fill Cap Assembly is an OEM part for GE dishwashers. This assembly includes the cap that covers the opening where rinse aid or other additives are poured into the dishwasher. It ensures that the additives are securely contained and properly dispensed during the wash cycles, contributing to effective cleaning and drying.
Over time, the fill cap assembly can become damaged due to regular use, exposure to cleaning agents, or accidental mishandling. A compromised fill cap can lead to leaks or improper dispensing of rinse aid, affecting the dishwasher's performance.
Symptoms of a bad fill cap assembly include:
- Rinse aid or additives leaking from the dispenser
- The cap not securing properly or coming off easily
- Improper dispensing of rinse aid
- Visible cracks or damage to the cap
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
The cap was long gone for the rinse agent dispenser [fill cap assembly] Jennifer B. • Pacifica , CA • July 31, 2014
Using your program, I loaded the info re my trusty old dishwasher (not ready to abandon over a cap) and you located the proper cap to replace my old one that has been lost for years. [don't ask how that happened in the first place!] I really didn't think you would have a part for an 18-20 year old dishwasher. After ordering the replacement cap, it arrived within a few days. I was so excited that I could fix this problem myself without calling an expensive repairman! I simply removed the part...
Read more
More
$23.95
- Compare At:
-
$28.26
- You Save:
-
$4.31
Genuine Ge part
By: Ge
Part Number: WD13X10003
If your dishwasher won't start or the door won't lock, the door latch assembly is likely failed. DIY-friendly repair takes about 30 minutes to replace.
This part fixes the following symptoms
-
Won't start
-
Door latch failure
-
Door won't close
See more...
Do-It-Yourself Stories from Customers like You
My ge performance plus dishwasher quit working the control panel would not light up and allow me to choose a cyle to run Jeff J. • Lex , KY • March 11, 2015
With the power to the dishwasher on, I removed the six or seven screws holding the door panel together. With the door separated, I manually moved the switch which should close when the dishwasher latch closes. This illuminated and activated the control panel telling me that the problem was in the door latch. I purchased a new latch from appliance parts pros and installed it. Very easy fix for a homeowner, taking thirty minutes.
Read more
More
$37.26
- Compare At:
-
$43.97
- You Save:
-
$6.71
Genuine Ge part
By: Ge
Part Number: WD21X10060
Note: This is the complete solenoid assembly kit. For armature & linkage assembly only, use WD1X1316.
The Solenoid Assembly is an OEM part for GE dishwashers. It plays a crucial role in controlling the flow of water into the dishwasher by activating or deactivating the drain valve. This assembly is essential for ensuring that the dishwasher fills and drains at the correct times during the wash cycle, which is pivotal for the overall efficiency and effectiveness of the appliance.
Common causes for a Solenoid Assembly to fail include wear and tear over time, mineral buildup from hard water, or electrical failures that prevent the solenoid from operating as intended.
Symptoms of a bad Solenoid Assembly include:
- Failure of the dishwasher to drain properly, leading to water accumulation at the bottom.
- The dishwasher not filling with water as it should, affecting the cleaning process.
- Unusual noises coming from the dishwasher, which may indicate the solenoid is failing to engage or disengage correctly.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Will not fill with water
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher was leaking at the very small washer off of the solenoid switch Bill D. • Olympia , WA • February 14, 2015
Put in the new parts and now it does not leak anymore. Very simple
Read more
More
$60.95
- Compare At:
-
$73.14
- You Save:
-
$12.19
Genuine Ge part
By: Ge
Part Number: WD30X28658
Insulation blanket that wraps around the dishwasher tub to reduce noise and maintain temperature. Replace if damaged, torn, missing, or contaminated.
Do-It-Yourself Stories from Customers like You
Not much it was noisy due to the deterioration of the original noise blanket David B. • Endicott , NY • March 19, 2015
I pulled the DW out, pulled off the old blanket pieces, vacuumed up the millions of small parts, then put the new blanket on, I did use some packing tape to hold it in place. Easy! The challenge was moving the unit out, then back in, but that was simply time and a little effort.
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Ge part
By: Ge
Part Number: WD3X764
Replacement spring for dishwasher detergent cup door assembly. Provides tension to keep cup door latched closed. Replace if broken, stretched, or lost.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$38.95
- Compare At:
-
$46.74
- You Save:
-
$7.79
Genuine Ge part
By: Ge
Part Number: WD24X10014
Replaces cracked, kinked, or chewed drain hose that carries wastewater from your dishwasher to household plumbing. Essential for proper drainage function.
Do-It-Yourself Stories from Customers like You
The dishwasher would not drain sometimes Thomas W. • Oceanside , CA • October 02, 2016
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips.
Read more
More
$37.26
- Compare At:
-
$44.34
- You Save:
-
$7.08
Genuine Ge part
By: Ge
Part Number: WD02X33462
Secures the dishwasher heating element to the tub from underneath. Replace if cracked, stripped, or missing to prevent leaks at the element mounting point.
Do-It-Yourself Stories from Customers like You
Dirty dishes and low heat. Mark B. • Smyrna , DE • May 26, 2018
First, I took the whole thing apart and cleaned every spot...the main culprit seemed to be the float. It was pretty gunked up and seemed to be not working...after a good cleaning it was fine...but once I pulled the unit out and checked underneath I noticed the heating element was loose, leaking, and had burnt off the blade connecting ire. So I promptly bought this replacement, installed it in about 5 minutes, did a clean cycle, and shes back to normal...I love AppliancePartsPros.com, and use...
Read more
More
$8.83
- Compare At:
-
$9.71
- You Save:
-
$0.88
Genuine Ge part
By: Ge
Part Number: WD30X98
Replacement slide rail for dishwasher upper rack. Installs on cabinet wall to guide rack in and out. Needed when original is bent, twisted, or broken.
Do-It-Yourself Stories from Customers like You
Upper rack on dishwasher was very hard to extend and retract Daniel N. • Bolingbrook , IL • August 05, 2014
Dishwasher needed new wheel that mounted to upper rack.There are 4 total that make the rack roll in and out. Replaced both side rails and rail caps (4- only 50 cents each) along with new upper rack that came with wheels installed. One side rail was bent so decided to spend a little extra and replace both. Might of been able to replace just one broken rack wheel but rack was old and was rusting in some areas so decided to just replace it.
Read more
More
$55.95
- Compare At:
-
$66.58
- You Save:
-
$10.63