Kenmore Dryer 417.74182301 (41774182301, 417 74182301) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134503600
The Dryer Drum Belt is an OEM replacement part designed for use with Frigidaire dryers. This critical component is responsible for turning the drum of your dryer, allowing your clothes to tumble freely and dry evenly.
Causes of a bad Dryer Drum Belt can include wear and tear from regular use, overloading the dryer, which puts extra strain on the belt, or exposure to excessive heat, which can cause the belt to become brittle and break.
Symptoms of a bad Dryer Drum Belt include:
- The dryer motor running but the drum not turning
- Unusual noises, such as thumping or squealing, coming from the dryer when it is running
- The dryer not starting at all, in some cases
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring a wide range of users can benefit from its reliable operation.
NOTE: Please note that this dryer drum belt is sold individually. Any additional parts or hardware will require additional purchases.
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281153
The Rear Drum Bearing Kit is an OEM replacement part for Frigidaire dryers. It contains a set of parts responsible for supporting the rear end of the dryer drum, allowing it to rotate smoothly and efficiently during the drying cycle.
Symptoms of a faulty Rear Drum Bearing Kit include:
- Excessive noise or grinding sounds coming from the rear of the dryer
- Difficulty in rotating the drum or drum not turning at all
- Visible signs of wear or damage on the existing bearings
- Increased vibrations or shaking during the drying cycle
Causes of needing to replace the rear drum bearing kit can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models.
NOTE: The metal plate holes are not threaded. Use the self-tapping screws provided in the kit to thread the plate.
This part fixes the following symptoms
-
Noisy
-
No heat or not enough heat
-
Marks left on clothes
See more...
Do-It-Yourself Stories from Customers like You
After 7 years of quiet service the dryer drum started squeaking very loud! Douglas D. • Columbia , MO • March 08, 2016
I found a video on Youtube which described dryer drum squeaks as most likely caused by a worn rear drum bearing.
I located the model number on the inside lip of the dryer door: Frigidaire Affinity LEQ6000ES2. I googled "frigidaire affinity dryer squeak". I got a link for my friends at AppliancePartsPros.com! I've used Appliance PartsPros 3 times before, so I figured I was in a "one-stop-solution" situation.
I ordered a rear drum bearing kit as well as a dryer drum belt (after nearly 7 years...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Frigidaire part
By: Frigidaire
Part Number: 131825900
The Dryer Drum Bearing is an OEM part for Frigidaire dryers. It supports the dryer drum, ensuring smooth rotation during the drying cycle. This part attaches to the inside of the rear panel of the cabinet, offering support to the dryer drum.
You should replace the drum bearing if it becomes worn out or damaged. Causes of a bad drum bearing can include normal wear and tear, overloading the dryer, or lack of lubrication.
Symptoms of a bad drum bearing include:
- Loud squeaking or grinding noises during operation
- The drum not turning smoothly or becoming misaligned
- Increased friction causing overheating or burning smells
- The dryer not tumbling clothes properly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Marks left on clothes
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937183
The Lower Felt Seal is an OEM part for Frigidaire dryers. This part creates a tight seal between the drum and the front panel, preventing air leakage and reducing energy consumption.
Symptoms of a failing Lower Felt Seal include:
- Clothes getting snagged or caught during the drying cycle
- Increased drying times due to heat escaping from the drum
- Excessive noise or squeaking as the drum rotates
- Visible wear, tears, or gaps in the felt seal
Causes of a bad lower felt seal can include regular wear and tear from the constant rotation of the drum, physical damage from overloading the dryer, or deterioration due to exposure to heat and humidity over time.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Constant beeping no heat Amy N. • Pike Road , AL • March 27, 2018
My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 137513300
The Drum Glide is an OEM part for Frigidaire dryers. It is designed to support the front of the dryer drum as it rotates, allowing the drum to turn smoothly with minimal friction and noise. This is a single glide. Your dryer uses two so it is recommended to replace both at the same time.
Causes of a bad drum glide can include wear and tear from regular use, excessive loads that put undue strain on the drum and its components, or accumulation of lint and debris that can interfere with the glide's movement.
Symptoms of a bad Drum Glide can include:
- Unusual noises, such as screeching or squealing, during operation
- Increased difficulty in turning the drum, leading to longer drying times or incomplete cycles
- Visible wear or damage to the glide itself, indicating it is time for a replacement
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$24.95
- Compare At:
-
$29.69
- You Save:
-
$4.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 131775600
The Blower Housing Assembly is an OEM part for Frigidaire dryers. It houses the blower wheel, which circulates air through the dryer drum and out the exhaust. This assembly ensures that hot air is efficiently directed through the dryer to dry clothes properly.
Over time, the blower housing assembly can become damaged or worn out, affecting the dryer's performance. Causes of a bad blower housing assembly can include accumulation of lint or debris, wear and tear from frequent use, or physical damage to the housing or blower wheel.
Symptoms of a bad Blower Housing Assembly include:
- Reduced or no airflow from the dryer vent
- Unusual noises during operation
- Clothes taking longer to dry
- Overheating or frequent cycling off of the dryer
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$104.95
- Compare At:
-
$125.94
- You Save:
-
$20.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303931775
The Dryer Gas Valve Coil Kit is an OEM part for Frigidaire dryers. This kit includes solenoid coils necessary for the opening and closing of the gas valve during the drying cycle. These coils are vital for controlling the flow of gas into the burner, enabling the ignition and maintaining the flame required to dry clothes effectively.
Symptoms of a bad Dryer Gas Valve Coil Kit include:
- No heat or insufficient heat in the dryer.
- The dryer stops heating partway through the cycle.
- A "clicking" noise when the dryer attempts to ignite the gas flame but fails.
- Gas smell from the dryer, indicating incomplete combustion.
Causes of a bad coil kit can include electrical failure within the coils, mechanical wear from repeated use, or overheating that damages the coil's integrity.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$23.95
- Compare At:
-
$34.51
- You Save:
-
$10.56
Genuine Frigidaire part
By: Frigidaire
Part Number: 131658800
The Door Catch is an OEM part for Frigidaire dryers. It secures the door closed during cycles. This allows the machine to safely run without the risk of the door opening, which could pause the drying process or pose a safety hazard. Constructed from durable materials, this door catch is designed to endure the frequent opening and closing of the dryer door, offering reliability and longevity.
Causes of a bad door catch include mechanical wear from regular use, accidental damage, or misalignment of the door.
Symptoms of a bad Door Catch include:
- The dryer door won't stay shut during cycles
- Difficulty closing the dryer door securely
- The need to apply extra force to close the door
- The dryer stops running due to the door opening mid-cycle
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$50.78
- Compare At:
-
$59.92
- You Save:
-
$9.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 137032600
The Inlet Thermal Fuse is an OEM part for Frigidaire laundry centers. It serves as a safety device to prevent the washer from overheating by cutting off electrical power if the temperature exceeds safe levels.
Causes of a bad inlet thermal fuse can include electrical issues such as short circuits, prolonged exposure to high temperatures, or wear and tear from regular use.
Symptoms of a bad inlet thermal fuse include:
- The washer not starting or stopping mid-cycle
- No power to the washer, even when plugged in
- Error codes indicating thermal issues
- The washer overheating during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Electrolux dryer e64 error code Katherine S. • Apex , NC • January 05, 2015
I think I have a lemon of a dryer. I keep having to pay someone to replace my heating element about every year. So I already had the heating element, but I thought I would replace the thermostat and the limiter also. Yes, I am a 46 year old mom, and I replaced all three items. Thank goodness to youtube! Ha! I have ordered from you before and you always send promptly. Thanks!
Read more
More
$14.95
- Compare At:
-
$22.59
- You Save:
-
$7.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 131863007
The Idler Arm Pulley is an OEM part for Frigidaire dryers. This part keeps the belt aligned and tight, preventing slippage and contributing to consistent drum rotation.
Causes of a bad Idler Arm Pulley can range from normal wear and tear, which can degrade the pulley's material or bearings, to improper alignment that puts undue stress on the pulley, leading to premature failure.
Symptoms of a malfunctioning Idler Arm Pulley include:
- Unusual noises, such as squeaking or rumbling, indicating the pulley may be worn or loose
- The dryer drum failing to rotate, even though the motor is running
- Excessive wear or damage to the dryer belt
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$53.42
- Compare At:
-
$63.57
- You Save:
-
$10.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281135
The Dryer Heat Sensor is an OEM part for Frigidaire dryers. This sensor monitors the temperature inside the dryer drum to ensure clothes are dried effectively and safely by regulating the heat levels during the drying cycle.
Causes of a bad heat sensor can include wear and tear from frequent use, buildup of lint or debris, or electrical issues. A malfunctioning sensor can result in incorrect temperature readings, leading to under-drying or overheating of clothes.
Symptoms of a bad Dryer Heat Sensor include:
- Clothes not drying properly or taking too long to dry
- Dryer overheating or shutting off unexpectedly
- Inconsistent drying cycles
- Error codes related to temperature control
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014
Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits.
I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have.
I looked up my dryer, decided what was probably the problem,...
Read more
More
$38.95
- Compare At:
-
$55.90
- You Save:
-
$16.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 131777700
The Rear Drum Support Shaft is an OEM part for Frigidaire dryers, specifically designed to ensure the stability and smooth rotation of the dryer drum. This component plays a pivotal role in the dryer's operation by supporting the rear of the drum, allowing it to turn evenly and quietly during cycles. Note: The rear drum bearing kit is 5303281153.
The causes behind these issues often stem from normal wear and tear, excessive loads that strain the dryer's components, or lack of regular maintenance. Over time, the support shaft can wear down, become loose, or even corrode, leading to operational inefficiencies and potential damage to the dryer.
Symptoms of a failing Rear Drum Support Shaft include:
- Unusual noises, such as thumping or squeaking, during operation
- The dryer drum struggling to rotate or not rotating at all
- Increased wear on other components, such as the belt or motor, due to improper drum alignment
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dryer would not turn on Kathie R. • Burlington , WI • January 15, 2016
The dryer is a Kenmore Laundry Center, model 417-99570150. Bought in 1998, so it is an older model. Not wanting to buy the newer ones that are out now. We opted to fix the Kenmore. Just believe the older models are worth fixing, if at all possible.
Frist we had to figure out what parts we would need and if the cost would be worth our time. I went on YouTube: and type in Kenmore dryer not turning on. Watched several videos to narrow down the possible problem.
Next step was to...
Read more
More
$113.73
- Compare At:
-
$136.48
- You Save:
-
$22.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 134417000
The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.
Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.
Symptoms of a bad seal include:
- Increased drying time as heat escapes
- Excess lint and moisture accumulation inside dryer components
- Visibly worn or cracked seal edges
- Cool air leakage noticed around the door when the dryer is running
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014
Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will...
Read more
More
$15.95
- Compare At:
-
$39.50
- You Save:
-
$23.55
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308027429
The High Temperature Adhesive is an OEM part for Frigidaire appliances. This adhesive is specifically formulated to withstand high temperatures and is used in various repair applications within appliances such as ovens, ranges, and dryers.The 1-ounce tube contains adhesive formulated to withstand the extreme heat inside dryer drums and cabinets
Causes of a bad adhesive can include exposure to extremely high temperatures over extended periods, contamination by dirt or grease, or the natural aging and drying out of the adhesive.
Symptoms of a bad high temperature adhesive include:
- Components or parts becoming loose or detached
- The adhesive becoming brittle or cracked
- Inability to properly bond surfaces exposed to high heat
- Visible deterioration or peeling of the adhesive
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Marks left on clothes
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Clothes getting stuck in front of dryer then later on a grinding and loud noise when spinning Michael G. • Chicago , IL • August 23, 2020
I'm new to how a dryer works, so I just started taking it apart to see what exactly was causing it. The video examples on the APP website were all amazing. It gave me a good idea of what I was getting into and showed me the common repair issues. The dryer being 12 years old, I was on the fence about repairing or replacing. However, once I got a list of parts I might need and getting the confidence by watching the videos, I said "what have I got to lose."
The cause of the scraping and loud...
Read more
More
$49.95
- Compare At:
-
$58.94
- You Save:
-
$8.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 134440200
The Upper Felt Seal is an OEM part for Frigidaire dryers. This felt seal is located at the top edge of the dryer drum and is designed to create a tight seal between the drum and the dryer cabinet. This helps prevent clothes from getting caught in the gap and ensures efficient drying by maintaining proper airflow within the drum. For High Temp adhesive order part number: [AP2153130].
Causes of a bad upper felt seal can include regular wear and tear from frequent use, friction and heat exposure over time, and damage from foreign objects inadvertently caught in the dryer. A compromised seal can lead to inefficient drying, increased wear on clothes, and potential damage to the drum.
Symptoms of a bad upper felt seal include:
- Clothes getting snagged or torn during drying
- Unusual noises such as squeaking or rubbing from the drum area
- Decreased drying efficiency or longer drying times
- Visible wear, thinning, or detachment of the felt seal
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Constant beeping no heat Amy N. • Pike Road , AL • March 27, 2018
My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear...
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303307893
The High Temp Lubricant Tube is an OEM part for Frigidaire appliances, specifically designed to withstand and operate under high temperature conditions. This lubricant is essential for the proper maintenance and functionality of various Frigidaire appliances, offering protection against heat and friction.
Over time, the lubricant can degrade or become contaminated, which can compromise its effectiveness. Causes of a bad high temp lubricant include exposure to extreme temperatures, accumulation of dirt and debris, or simply the natural breakdown of the lubricant over prolonged use.
Symptoms of needing a new High Temp Lubricant Tube include:
- Increased noise during appliance operation
- Reduced efficiency or performance of the appliance
- Harder movement of parts that should glide smoothly
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dryer was making a load screaching noise Stephen M. • Lees Summit , MO • January 04, 2016
Replaced the rear drum bearing assembly and the front top felt that the drum rides on and since I has it apart installed a new belt. Simple to do and takes very little time!
Read more
More
$39.95
- Compare At:
-
$47.54
- You Save:
-
$7.59