Bosch Dishwasher SHU53E02UC14 Parts
Genuine Bosch part
By: Bosch
Part Number: 00170664
Replacement mounting bracket set for securing your dishwasher to cabinetry. Needed when original brackets are bent, broken, or missing during installation.
Do-It-Yourself Stories from Customers like You
Recently had granet countertops installed dishwasher was slidimng around needed to install side mounts to corral the dish washer Reed H. • Beaver Falls , PA • January 03, 2016
Easily installed the side mounts and put new trim around the opening.
Read more
More
$23.68
- Compare At:
-
$28.18
- You Save:
-
$4.50
Genuine Bosch part
By: Bosch
Part Number: 00480317
Fix dishes not drying or cycles taking 3+ hours. This heating element heats wash water and enables drying. Moderate DIY repair with video guide.
This part fixes the following symptoms
-
Not drying dishes properly
-
lights flashing or blinking
See more...
Do-It-Yourself Stories from Customers like You
Bosch dishwasher not heating water or drying dishes machine cycled for 3+ hours Tom B. • Arcade , NY • July 05, 2015
Ordered new heater/thermostat piece.
Read more
More
$291.24
- Compare At:
-
$349.49
- You Save:
-
$58.25
Genuine Bosch part
By: Bosch
Part Number: 00263099
Replaces cracked or brittle dishwasher hose connecting the sump to the water inlet valve. Includes 2 o-rings. Essential for preventing leaks during pump replacement or routine maintenance.
Do-It-Yourself Stories from Customers like You
Low water pressure / arms not spinning Wilbur C. • Washington , DC • October 13, 2014
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread.
Six pointers.
1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is...
Read more
More
$13.42
- Compare At:
-
$15.97
- You Save:
-
$2.55
Genuine Bosch part
By: Bosch
Part Number: 00618605
The Roller and Cable Assembly is an OEM part for Bosch dishwashers. This assembly includes the roller and cable, which work together to facilitate the smooth operation of the dishwasher door, allowing it to open and close effortlessly.
Over time, the roller and cable can wear out or become damaged due to regular use, friction, or accidental mishandling. If either component fails, it can affect the balance and movement of the dishwasher door, making it difficult to operate.
Symptoms of a bad roller and cable assembly include:
- Difficulty in opening or closing the dishwasher door
- A sagging or misaligned door
- Unusual noises when operating the door
- The door not staying securely in place
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Door too heavy and mounting bracket broken. Jim H. • Minneapolis , MN • September 04, 2017
This turned out to be a major effort, requiring me to disconnect the dishwasher, pull it from the cabinetry and partially disassemble the dishwasher to replace the door closer pulley
Read more
More
$84.47
- Compare At:
-
$101.36
- You Save:
-
$16.89
Genuine Bosch part
By: Bosch
Part Number: 00171598
Seals connection between pump and sump to prevent leaks during wash cycles. Replace if water pools under dishwasher or pump noise occurs.
Do-It-Yourself Stories from Customers like You
The machine would not enter the wash cycle or would try John D. • Tewskbury , MA • April 20, 2018
Hearing a metal on metal noise and not actually circulate water cancelling cycle worked fine After some web research, I concluded it was highly likely to be the circulation pump, so I watched the video on AppliancePartPros.com and realized it was a lengthy repair (a lot of steps) but not technically difficult. I simply played and paused the video at each step and duplicated the steps.
The biggest things to take note of:
1) take good pictures of the wiring to use when you re-connect.
2) Wear...
Read more
More
$30.95
- Compare At:
-
$36.52
- You Save:
-
$5.57
Genuine Bosch part
By: Bosch
Part Number: 00263096
Seals the sides and top of your dishwasher tub to prevent leaks and contain steam. Replace when worn or cracked to restore watertight operation.
Do-It-Yourself Stories from Customers like You
Dishwasher continually filling with water Jack M. • Siloam Springs , AR • December 15, 2014
Web site helped me diagnose problem as water inlet valve not fully shutting off. Repairman quoted me 200.00 to fix, so I decided to gamble the price of the item and repair myself. Web site offered easy to follow, detailed video instructions, had the part replaced and back to working like new in less than 30 minutes.
Read more
More
$83.43
- Compare At:
-
$98.45
- You Save:
-
$15.02
Genuine Bosch part
By: Bosch
Part Number: 00165254
Replacement end cap stops for dishwasher upper rack rails. Clips onto rail ends to keep rack on track. Order when original caps are cracked or missing.
Do-It-Yourself Stories from Customers like You
Dish rack stop broke Gregory B. • Bayside , NY • September 23, 2019
Ordered the part, it was delivered quickly, back in business.
Thanks
Read more
More
$14.73
- Compare At:
-
$17.53
- You Save:
-
$2.80
Genuine Bosch part
By: Bosch
Part Number: 00263102
Seals the dishwasher sump to prevent water leaks during wash cycles. Replace if you notice leaking at the base or constant drain pump operation.
Do-It-Yourself Stories from Customers like You
Bosch shv4304 water leaking into base and drain pump running constantly Jonathan F. • Highland , NY • February 05, 2018
I replaced the gaskets with products from this site which I would not have been able to do without the video on this site. Hard job. The leak was still there though, so I have some hints with this kind of washer. 1) There is a float switch on the base that turns on the drain pump when there is a leak, that is why the drain pump runs constantly, it prevents catastrophic flooding in many cases. The float consists of a little styrofoam donut that lifts an arm, all white. The arm is connected to a...
Read more
More
$28.95
- Compare At:
-
$34.16
- You Save:
-
$5.21
Genuine Bosch part
By: Bosch
Part Number: 00093046
Replace your broken, cracked, or missing dishwasher silverware basket. Holds utensils securely in the lower rack during wash cycles. Includes handle.
Do-It-Yourself Stories from Customers like You
Soap dispenser did not stay closed Petra G. • West Chester , PA • October 18, 2014
After having seen the video I installed the new lid and it worked.
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Bosch part
By: Bosch
Part Number: 00176121
Mounting screw that secures the toe kick panel to the bottom frame of your dishwasher. Replace if screw is lost, stripped, or damaged during installation.
Do-It-Yourself Stories from Customers like You
Bosch part(kick plate) was missing Kyle K. • Green Bay , WI • November 14, 2015
My order arrived very fast and was easy to install.
Read more
More
$6.41
- Compare At:
-
$7.56
- You Save:
-
$1.15
Genuine Bosch part
By: Bosch
Part Number: 00166637
Seals the detergent dispenser to prevent leaks and ensure proper release during wash cycles. Replace if detergent leaks or dispenser malfunctions.
Do-It-Yourself Stories from Customers like You
Soap dispenser not opening Matt L. • Morrisville , VT • January 19, 2018
Replaced dispenser.
It was hard to snap into place. You don't need to order separate gasket it comes with it.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Bosch part
By: Bosch
Part Number: 00361113
Hose, with o - ring, shu (uc/12 & above)
This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.
What Causes a Bad Sump to Float Hose:
Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.
Symptoms of a Bad Sump to Float Hose:
- Water leakage around the dishwasher
- Incomplete or interrupted washing cycles
- Visible cracks or damage to the hose
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Low water pressure / arms not spinning Wilbur C. • Washington , DC • October 13, 2014
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread.
Six pointers.
1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is...
Read more
More
$15.71
- Compare At:
-
$18.69
- You Save:
-
$2.98
Genuine Bosch part
By: Bosch
Part Number: 00088403
2 clamps included.
Do-It-Yourself Stories from Customers like You
Missing part to reinstall dishwasher to disposal James I. • Rochester , NY • October 07, 2014
ORDERED TUBE AND CLAMPS
Read more
More
$19.21
- Compare At:
-
$22.67
- You Save:
-
$3.46
Genuine Bosch part
By: Bosch
Part Number: 00165263
Plastic cover that protects the drain pump mechanism from debris. Replace if cracked, broken, or tabs are bent preventing proper seal during drain cycles.
Do-It-Yourself Stories from Customers like You
No spray during wash cycle pump impeller was broken. Robert K. • Cazenovia , NY • February 22, 2019
Watched AppliancePartsPros video, disassembled the dishwasher and replace impeller and seals.
Read more
More
$12.16
- Compare At:
-
$12.92
- You Save:
-
$0.76
Genuine Bosch part
By: Bosch
Part Number: 00423896
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
- Secures the toe-kick or lower access panel to the base/frame
- Restores proper fit when the original screw is lost or damaged
- Helps reduce panel rattles and vibration
- Maintains correct alignment and clearance at the bottom edge
What's included: One M4 x 8 screw Install notes:
- Disconnect power before servicing; also shut off the water supply
- Support the panel and align holes before threading the screw
- Start by hand to avoid cross-threading; tighten snugly—do not overtighten
- Verify size matches the original; replace matching hardware together if required by your model
Do-It-Yourself Stories from Customers like You
I fell backwards & dishwasher door was open i won the battle! i have the bruises & bent hinges to prove it Kathleen O. • West Chester , PA • July 22, 2017
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros.
Read more
More
$12.16
- Compare At:
-
$13.38
- You Save:
-
$1.22
Genuine Bosch part
By: Bosch
Part Number: 00165281
Fix dishwasher not heating or running for hours. This NTC temperature sensor monitors water temp and prevents overheating. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Bosch dishwasher not heating water or drying dishes machine cycled for 3+ hours Tom B. • Arcade , NY • July 05, 2015
Ordered new heater/thermostat piece.
Read more
More
$93.89
- Compare At:
-
$103.28
- You Save:
-
$9.39