Kenmore Refrigerator 106.56669500 (10656669500, 106 56669500) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212363
Fix a refrigerator that won't dispense ice with a new auger motor. Typical repair takes 30 minutes with basic tools. Video instructions available.
Do-It-Yourself Stories from Customers like You
Auguer motor for ice maker stopped working Tommy T. • Fayetteville , GA • January 12, 2015
Very easy to replace. Take off cover to auger compartment. Unplug power connector from auger motor. Remove four screws holding auger motor to refrig. Put new auger motor in place, insert screws, insert power connector, replace cover. Use ice maker!
Read more
More
$129.24
- Compare At:
-
$152.50
- You Save:
-
$23.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2216112
Refrigerator not cooling but freezer works fine? The air damper controls cold air flow between compartments. DIY-friendly repair with video guide.
This part fixes the following symptoms
-
Fridge too cold
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Air diffuser broke Kenneth D. • Boca Raton , FL • March 05, 2015
The site came up on a Google search suggesting a new air diffuser which was indeed the problem. I got a thermistor too just in case but probably want needed. Saved a fortune compared to a repair man and was able to cancel an order I had for a new unit saving over $1200+! Very happy with the whole process and videos on you tube etc. Great site! Thanks!
Read more
More
$152.79
- Compare At:
-
$181.82
- You Save:
-
$29.03
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10190929
The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.
You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.
Symptoms of a bad Ice Mold include:
- Ice cubes not forming correctly or being irregular in shape
- Ice cubes sticking to the mold and not dispensing
- The icemaker not producing ice at all
- Leaks around the icemaker area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level.
With guidance from the video, I removed the icemaker from the wall of the freezer. The...
Read more
More
$154.95
- Compare At:
-
$185.94
- You Save:
-
$30.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2256126
Stores and chills water before dispensing. Replace if cracked, leaking, or causing slime/film buildup in dispensed water. Installs inside refrigerator.
Do-It-Yourself Stories from Customers like You
Replaced of water filter then discovered a long slimy clear algae on purging system Michel L. • Rockledge , FL • March 26, 2017
After watching installation videos on each felt I could pull it off and ordered and received replacement water reservoir and water dispenser tube assembly. Reservoir installation went off without a hitch outside of the added step of the need to remove the entire main in waterline assy in order to access the connectors which also were not as represented in video, in that they were not the press-to-release type but standard threaded compression types.
Water Dispenser tube/spout assembly was much...
Read more
More
$96.62
- Compare At:
-
$114.98
- You Save:
-
$18.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195051
The Dispenser Arm Strain Relief is an OEM replacement part for Whirlpool side-by-side refrigerators. It connects the water and ice dispenser arm to the fridge cabinet, absorbing tension during use.
Causes of a bad strain relief involve wear and flexing fatigue of the plastic over extensive dispensing cycles. Exposure to moisture or liquid damage inside the fridge liner may prematurely degrade connecting parts as well.
Symptoms of a bad strain relief include:
- Cracks, splits, or tears in the relieving plastic material
- Dispenser arm separation from the cabinet opening
- Missing pieces that compromised structural integrity
- Difficulty accessing or using the refrigerator's water/ice functions
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerator models.
Do-It-Yourself Stories from Customers like You
In door water dispensor Brian C. • Pve , CA • June 27, 2016
With the help of the fantastic videos provided on the web site for each replacement part, it was extremely easy to complete the repair
Read more
More
$17.48
- Compare At:
-
$18.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2176759
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
Do-It-Yourself Stories from Customers like You
Freezer cold but refrigerator warm. Michael D. • Windham , NH • May 04, 2018
I could not be happier with my Appliance Parts Pros experience. I googled my symptoms, and the 2nd result was a video from Appliance Parts Pros describing what the problem might be and exactly how to fix it. There was such a close match between my symptoms and the description that I ordered the parts --- with a 365 day return policy, my risk was limited.
Almost too good to be true, the parts arrived next business day! I took it slow (about an hour) to install the new evaporator fan motor,...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212370
The Coupling is an OEM replacement part for Whirlpool French door bottom-mount refrigerators equipped with an interior automatic icemaker. As an internal part, this coupling connects the auger motor to the ice mold assembly, allowing the motor to transmit rotational force during the ice harvest cycle.
Causes of a damaged coupling can include regular wear from years of exposure to changing temperatures inside the refrigerator. Mineral deposits accumulating on surfaces over many harvest seasons have the potential to deteriorate plastic material. Physical obstructions lodged in the icemaker mechanism could potentially bend or crack the coupling.
Symptoms of a failing coupling involve:
- Inability of the auger motor to engage fully and eject frozen cubes
- Grinding or knocking sounds emitting from the icemaker
- Restricted or incomplete ice harvest that leaves cubes in molds
This OEM replacement is compatible with some Kenmore Elite French door models.
Do-It-Yourself Stories from Customers like You
Ice dispenser was skipping so not dispensing ice Del H. • Midlothian , TX • September 03, 2018
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed...
Read more
More
$15.32
- Compare At:
-
$18.38
- You Save:
-
$3.06
Genuine Whirlpool part
By: Whirlpool
Part Number: W11629974
Ice maker stopped working or not producing ice? This control board monitors ice levels and regulates production. DIY-friendly repair, most installs in 10-20 minutes.
Do-It-Yourself Stories from Customers like You
My ice maker was not gettin water so it couldn't make ice the videos and information on this web site show me how to troubleshoot and find out what the problem was ans how to fix it Mary O. • League City , TX • June 21, 2014
Test showed it was the infrared sensor, so I ordered the replacement parts, which arrived with standard shipping in just a couple of day. The video on the site show exactly what to do. The fix and installation of the replacement part was quick and easy. My ice maker is producing ice like bran knew. I could not be happier with the service and information provided by this site. Great job guys, really great job.
Read more
More
$231.48
- Compare At:
-
$238.37
- You Save:
-
$6.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281164
The Screw is an OEM part for Whirlpool appliances, designed to provide secure fastening in a variety of locations within the appliance. This versatile component is crucial for assembly and maintenance tasks, ensuring that parts are held together tightly and function as intended. Whether it's securing panels, attaching components, or facilitating repairs, this screw is engineered to meet the specifications of Whirlpool appliances, offering durability and reliability.
Causes of screw issues can include normal wear and tear, over-tightening, which may strip the threads, or corrosion that weakens the screw's hold.
Symptoms of a bad or missing Screw include:
- Loose components or panels within the appliance
- Unusual noises due to parts not being securely fastened
- Difficulty in assembling or disassembling parts for repairs or maintenance
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower ice bin broken Dennis B. • Wichita Falls , TX • March 30, 2020
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw.
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10307490
Horizontal metal rod that secures glass shelf panels inside your refrigerator door. Replace if broken, bent, or missing to prevent shelf slippage.
Do-It-Yourself Stories from Customers like You
Broken part Elaine K. • Elgin , IL • August 12, 2019
Cut piece to fit
Read more
More
$13.95
- Compare At:
-
$16.74
- You Save:
-
$2.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201707
This Door Hinge Kit is an OEM replacement part for Whirlpool refrigerators. It includes the left and right lower door hinges. These hinges are crucial components that allow the refrigerator doors to swing open and close both smoothly and securely. This kit includes both the freezer and refrigerator door hinges.
Symptoms of bad door hinges can include:
- The door not sealing properly when closed
- Difficulty opening or closing the door
- Excessive noise emanating from the hinge area
- Door alignment issues where it does not sit flush
Causes of failure typically involve hinge components wearing down over extended use. Hinges may also become loose, misaligned, or damaged due to impact over time.
This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed hinges for doors William H. • Niles , MI • September 22, 2015
Put the new hinges on the doors fyi you need to tell what size the screws are for the hinge kits would help a lot
Read more
More
$48.37
- Compare At:
-
$57.56
- You Save:
-
$9.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
$7.31
- Compare At:
-
$8.63
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489497
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Do-It-Yourself Stories from Customers like You
Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016
Found the parts in the diagram of my fridge and simply installed it very easy
Read more
More
$11.51
- Compare At:
-
$13.81
- You Save:
-
$2.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2256096
Plastic tube that delivers water from the supply line to the ice maker assembly. Replace if cracked, split, burst, or leaking inside the freezer.
Do-It-Yourself Stories from Customers like You
Bad tasting water and ice whirlpool side by side refrigerator Robert D. • Jacksonville , FL • October 06, 2016
Replaced internal water supply line to ice maker and water reservoir line for door water dispenser. Parts arrived quickly and repair was a no-brainer thanks to the repair videos.
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$52.95
- Compare At:
-
$62.48
- You Save:
-
$9.53