Kenmore Refrigerator 106.9530482 (1069530482, 106 9530482) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196157
The Icemaker Fill Tube Fitting is an OEM part for Whirlpool refrigerators. This part connects the water supply line to the icemaker, ensuring a seamless and leak-free delivery of water into the icemaker mold.
Causes of a bad Icemaker Fill Tube Fitting can include wear and tear over time, mineral buildup from hard water, which can block the water flow or damage the fitting, and improper installation that may lead to leaks or restricted water flow.
Symptoms of a bad Icemaker Fill Tube Fitting include:
- Water leakage at the connection points, leading to potential water damage or ice buildup in the freezer
- Insufficient ice production if the fitting is partially blocked or not properly connected, restricting water flow to the icemaker
- Unusual noise during the icemaker fill cycle, indicating a potential issue with the fitting
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$9.60
- Compare At:
-
$11.52
- You Save:
-
$1.92
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823511
The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.
Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.
Symptoms of a bad ice maker water line include:
- Reduced or no ice production
- Leaking water from the refrigerator
- Visible cracks or damage to the water line
- Ice cubes that are smaller than usual
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489357
The Screw is an OEM fastening component specifically designed for securing interior panels and assemblies of Whirlpool brand appliances.
Causes of a problematic screw include stripping, corrosion, or shearing from repeated installations and removals during service procedures.
Symptoms of faulty screws include:
- Loosened or detached interior panels rattling behind appliance exteriors
- Reduced structural integrity allowing unnecessary vibrations and noise
Compatible models include brands produced by KitchenAid, Maytag, and some Kenmore.
Do-It-Yourself Stories from Customers like You
Broken refrigerator handle Paul M. • Mechanicsville , VA • May 06, 2019
I ordered a new handle from Applisnce Parts Pros. It fit the refrigerator perfectly. I reused some of the old screws and ordered one new screw with a cover to attach the bottom of the handle.
Now the refrigerator looks as good as new!
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10190929
The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.
You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.
Symptoms of a bad Ice Mold include:
- Ice cubes not forming correctly or being irregular in shape
- Ice cubes sticking to the mold and not dispensing
- The icemaker not producing ice at all
- Leaks around the icemaker area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level.
With guidance from the video, I removed the icemaker from the wall of the freezer. The...
Read more
More
$162.27
- Compare At:
-
$193.10
- You Save:
-
$30.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.48
- Compare At:
-
$8.83
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388538
Replacement shelf stud kit for refrigerator compartments. Secures adjustable shelves to interior liner. Needed when original studs crack or break off.
Do-It-Yourself Stories from Customers like You
Crisper drawer supports broken Donna D. • Tamarac , FL • October 08, 2014
My Whirlpool fridge is 12 yrs old. The crisper drawer supports finally gave up. I googled the make and model number for repair parts and AppliancePartsPros.com came up. I was actually surprised that I found the support peg and stud. I watched the video on their site on how to replace them, saw that it was easy and ordered the parts that afternoon. To my utter amazement the parts came via FedEx the following afternoon! I have to admit if I didn't watch the video I wouldn't have known how...
Read more
More
$25.76
- Compare At:
-
$30.91
- You Save:
-
$5.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1126289
The Shelf Frame is an OEM replacement part for Whirlpool refrigerators. It is an internal frame component that provides structure and support for refrigerator shelves. Measures about 17 inches wide by 17 inches deep.
Causes of a bad shelf frame can include damage like dents, bends or cracks that compromise strength. Repeated impact over the lifespan may weaken metal mounting rails.
Symptoms of a bad shelf frame include:
- Shelves that sag, bow or dislodge from their tracks
- Inability to optimally organize refrigerator interiors
- Potential spills if shelves are overloaded
- Restricted access until replacement restores functionality
This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, and some Kenmore models.
Please note: Does not include glass. For the glass order WP1114687.
Do-It-Yourself Stories from Customers like You
Broken track stud shelf shelf frame and cover John K. • Hyde Park , NY • December 10, 2015
The broken track and shelf stud were the most important part of the repair. I was astounded to find parts for a 20 year old fridge. I was concerned about how to remove the damaged stud. As luck would have it, your site contained a video on how to remove it. Without the video, I would not have been so successful and would most likely have done more harm than good. All I needed for the repair was an open end wrench. It took about 30 seconds to remove and replace. I could not be more please...
Read more
More
$86.35
- Compare At:
-
$101.89
- You Save:
-
$15.54
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP628356
Ice maker leaking or shutoff arm broken? This fill cup and bearing assembly directs water into the mold and supports the arm. 15-minute DIY fix.
This part fixes the following symptoms
-
Ice maker dispenses too much ice
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken part Eva H. • Walnut Creek , CA • March 23, 2014
Watched online video and worked along - it was easy and quick - I was amazed!
Read more
More
$35.95
- Compare At:
-
$42.42
- You Save:
-
$6.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489483
The Screw is an OEM replacement part for Whirlpool appliances. The precise threads allow screws to join or assemble other parts securely.
Causes of a bad screw can include stripping, cracking, or loss of threads due to repeated installation/removal over time. Corrosion is also possible depending on environmental conditions.
Symptoms of a bad screw include:
- Loosened or detached components that were once fastened
- Reduced structural integrity of connections or assemblies
- Potential safety hazards if critical parts become dislodged
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016
Found the parts in the diagram of my fridge and simply installed it very easy
Read more
More
$11.78
- Compare At:
-
$14.14
- You Save:
-
$2.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10151374
Fix food freezing in fresh food or crisper drawers with this refrigerator air damper assembly. Regulates airflow between compartments. DIY video included.
Do-It-Yourself Stories from Customers like You
My freezer was cooling but not fridge Charnel C. • North Lauderdale , FL • January 24, 2017
Checked air damper, it was blocked with ice. Replace it and defrosted it. Good to go.
Read more
More
$49.51
- Compare At:
-
$58.92
- You Save:
-
$9.41
Genuine Whirlpool part
By: Whirlpool
Part Number: W11566763
Directs defrost water to the drain line in your refrigerator. Replace if cracked, broken, or leaking to prevent water buildup inside the unit.
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2149540
Refrigerator shelf support stud.
Do-It-Yourself Stories from Customers like You
Crisper drawer supports broken Donna D. • Tamarac , FL • October 08, 2014
My Whirlpool fridge is 12 yrs old. The crisper drawer supports finally gave up. I googled the make and model number for repair parts and AppliancePartsPros.com came up. I was actually surprised that I found the support peg and stud. I watched the video on their site on how to replace them, saw that it was easy and ordered the parts that afternoon. To my utter amazement the parts came via FedEx the following afternoon! I have to admit if I didn't watch the video I wouldn't have known how...
Read more
More
$10.71
- Compare At:
-
$12.74
- You Save:
-
$2.03
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627018
1/4 inch compression nut for securing plastic water lines in refrigerators and ice makers. Replace worn, cracked, or missing nuts to prevent leaks.
Do-It-Yourself Stories from Customers like You
Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks.
Read more
More
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10250570
Supports your refrigerator at the base and lets you roll it forward for cleaning. Replace this roller assembly if cracked, broken, or seized to restore smooth movement.
Do-It-Yourself Stories from Customers like You
The plastic left rear wheel was coming apart and needed replacing Gary H. • San Antonio , TX • June 11, 2016
I decided if one needed replacing I might as well both two--made sense to me. None were available locally so I ordered them on-line. Surprisingly they came sooner than I expected. I also found a video on the internet that clearly showed the procedure. The actual repairs took 15 minutes or less. One good suggestion from the video was to run the screw in and out of the wheel bracket before final mounting. The video also suggested putting something under the corner to eliminate tipping. The...
Read more
More
$29.48
- Compare At:
-
$35.08
- You Save:
-
$5.60