Kenmore Washer 110.27802690 (11027802690, 110 27802690) Parts

The Thrust Washer is an OEM part for Whirlpool washing machines, specifically designed to reduce friction between the moving parts of the washer's transmission system. This small but crucial component is placed between the rotating and stationary parts, allowing for smooth movement and preventing wear and tear on the transmission.  

Causes for a Thrust Washer to fail include regular wear and tear from the mechanical stress of washing cycles, improper alignment or installation that can lead to uneven wear, and the accumulation of debris or corrosion that can interfere with its function. 

Symptoms of a bad Thrust Washer include:

• The washing machine makes unusual noises during operation 
• The washer struggles to switch between cycles or fails to spin at the correct speed.
• Increased vibration or shaking of the washing machine

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Shaft Seal is an OEM replacement part for Whirlpool washing machines. It is designed to create a watertight seal around the tub shaft, preventing water from leaking out during the wash cycle. This seal ensures the proper functioning of the washer by maintaining the integrity of the water containment within the machine.

Over time, the shaft seal can degrade due to continuous exposure to water, detergent, and the mechanical stresses of the wash cycles. This wear and tear can lead to the seal becoming brittle or cracked, compromising its ability to prevent leaks. Additionally, improper installation or misalignment can also cause the seal to fail prematurely.

Symptoms of a bad shaft seal include:

• Water leaking from the bottom of the washing machine
• Excessive moisture or pooling water around the washer
• Unusual noises during the spin cycle
• Visible cracks or damage to the seal itself

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spanner Nut is an OEM part for Whirlpool washing machines. This nut secures the washer tub to the drive shaft, ensuring that the tub remains stable during the wash and spin cycles. Properly securing the tub is crucial for the machine's performance and longevity, as it helps maintain balance and reduce vibrations.

You should replace the spanner nut if it becomes loose or stripped. Causes of a bad spanner nut can include over-tightening, regular wear and tear, or damage from heavy loads. Exposure to moisture and detergent over time can also lead to corrosion, compromising the nut's ability to secure the tub effectively.

Symptoms of a bad spanner nut include:

• Excessive vibrations or shaking during the wash cycle
• Loud banging or knocking noises
• The washer tub being loose or misaligned
• Leaks around the tub area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Tool for removing the spanner nut - TB123B.

The Basket Drive is an OEM replacement part for Whirlpool washers. The basket drive is responsible for rotating the wash basket during the cycle. 

Common causes of a bad basket drive include regular wear and tear, mechanical failures, or damage from overloading the washer. These issues can prevent the washer drum from spinning or agitating properly.

Symptoms of a bad basket drive can include:

• The washer fails to agitate or spin clothes properly 
• Strange noises are heard coming from the drive area
• The basket no longer rotates smoothly
• Excessive vibration is noticed 

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Shaft Seal is an OEM part for Whirlpool washing machines. This seal is designed to fit around the shaft that connects the tub to the transmission or motor, preventing water from leaking out of the tub and into the machine's internal components.

Causes of damage to the Shaft Seal often involve normal wear and tear from regular use, as the constant motion of the shaft can gradually degrade the seal.

Symptoms of a bad Shaft Seal include:

• Water leaking from the underside of the washing machine, particularly during or after a wash cycle
• A noisy operation, especially during the spin cycle, can sometimes result from water leaking into the bearings and causing them to fail
• The presence of rust or corrosion around the area where the shaft enters the tub

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Self-Leveling Leg Spring is an OEM replacement part for Whirlpool washers. It is responsible for stabilizing the washer and ensuring it sits level on uneven surfaces. Each spring is individually designed to compress or extend based on the weight and load distribution inside the washer tub. 

Causes can include failure of the compression spring over many usage cycles, or damage from over-compressing the spring through excess weight loads. 

Symptoms of a bad self-leveling leg spring include:

• The washer rocks or wobbles noticeably during operation  
• Excessive vibration transferred to nearby appliances or cabinets
• Difficulty loading and unloading clothes due to an unleveled washer 
• Premature wear of internal components like bearings from prolonged off-balancing

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Long Cam Agitator Repair Kit is an OEM part for Whirlpool washing machines. This kit is essential for restoring or maintaining the function of the washer's agitator, which is crucial for the proper movement and cleaning action of clothes within the machine. This kit includes 4 agitator dogs, a long-length cam, and a retainer. For the Whirlpool agitator grease order 350849.For the medium cam order 285811. For the short cam kit order 285809.

Causes of a bad Long Cam Agitator can include worn or stripped cogs, broken or degraded cam pieces, or a malfunctioning thrust spacer. These issues can impair the agitator's ability to move properly, affecting the machine's overall performance.

Symptoms of a bad Long Cam Agitator include:

• The agitator failing to turn or only moving slightly during cycles.
• Unusual noises during the wash cycle, indicating mechanical struggles.
• Clothes coming out less clean due to insufficient agitation.
• The top part of the agitator moving independently from the base.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Internal Drain Hose is an OEM part for Whirlpool washing machines. This hose is responsible for carrying used water from the washer tub to the drain pump, facilitating the efficient removal of water during the drain cycles. It ensures that water is properly directed out of the washer, preventing leaks and maintaining optimal washing performance.

Causes of a bad internal drain hose can include blockages from debris or lint, wear and tear from regular use, or damage such as cracks or splits from mishandling or aging.

Symptoms of a bad internal drain hose include:

• Water leaking inside or around the washer
• Slow or incomplete draining
• Error codes related to draining issues
• Unusual noises during the drain cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Tub to Pump Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub assembly to the pump, carrying water drained from the tub into the pump housing. This hose is a component that allows the machine to drain water efficiently during the spin cycle.

Causes of a bad tub to pump hose can include mineral buildup that restricts water flow, fatigue and wearing that cause cracks or splits, damage from rodents or sharp/heavy objects in the wash load, and deterioration from age that increases brittleness.

Symptoms of a bad hose include:

• Water leaks during or after the drain cycle
• Inability to fully drain water from the tub
• Water remaining in the tub after spinning

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Bearing and Seal Kit is an OEM component for Whirlpool and KitchenAid front-load washing machines. The kit includes 2 center post bearings, 3 agitator shaft seals, and 1 center post seal.

These internal seals help retain lubrication inside the motor shaft housing, while the bearings allow for smooth rotation of critical components like the drive pulley. Continuous belt rubbing and water exposure diminish their lifespan over time.

Symptoms of worn motor seals or bearings include:

• Abnormal vibrations during the wash or spin cycles
• Noisy operation and grinding sounds from the motor
• Difficulty starting or stopping the cycle

This OEM kit is also compatible with Maytag, Jenn-Air, Magic Chef, and select Kenmore models.

The Washer Filter Plug Kit is an OEM replacement part for Whirlpool washing machines. This kit includes the necessary components to seal the filter housing and prevent leaks, ensuring that the washer operates efficiently. The filter plug helps to maintain the proper water flow and filtration within the washer, preventing debris from clogging the system and ensuring clean and effective washing cycles. The kit includes 4 plugs and replaces the round filter under the basket.

Over time, the filter plug can become worn or damaged due to continuous exposure to water, detergent, and the mechanical stress of the wash cycles. Improper installation or accidental impact during maintenance can also cause the plug to fail. These issues can lead to leaks and reduced efficiency of the washing machine.

Symptoms of a bad washer filter plug include:

• Water leaking from the bottom of the washer
• The washer not draining properly
• Visible cracks or damage to the filter plug
• Excessive noise during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spring Mounting Bracket is an OEM part for Whirlpool washing machines. It is located at the bottom of the appliance, near the base. It provides a secure attachment point for the suspension springs, which help absorb vibrations and stabilize the drum during operation.

Causes of a faulty spring mounting bracket can include regular wear and tear, physical damage, or improper installation. These factors can result in issues such as excessive shaking or movement of the appliance, increased noise during operation, or unbalanced loads.

Symptoms of a bad spring mounting bracket may include:

• Excessive shaking or movement of the appliance during operation
• Increased noise or rattling sounds during the wash or drying cycle
• Unbalanced loads, causing the drum to tilt or not spin properly

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Upper Transmission Shaft Seal is an OEM replacement part for Whirlpool washing machines. This seal is designed to prevent water from leaking out of the washer tub and into the transmission, ensuring the proper function of the washing machine's internal components.

Causes of a bad upper transmission shaft seal can include wear and tear from regular use, exposure to harsh detergents, or damage from foreign objects. Over time, the seal material can degrade, leading to leaks and reduced efficiency.

Symptoms of a bad upper transmission shaft seal include:

• Water leaking from the bottom of the washing machine
• Unusual noises during the spin cycle
• Transmission oil stains on the floor
• Poor washing performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Clutch Band and Lining Kit is an OEM part for Whirlpool washing machines. It contains the clutch band and clutch lining components essential for proper transmission of power from the washer motor to its drum during the spin cycle. The clutch band and lining allow for a controlled amount of slippage to safely extract water from clothes without damage. 

Symptoms of a bad clutch band and lining include: 

• Excessive noise or vibration during spin
• Slow or ineffective spinning 
• The drum failing to spin or “locking up”
• Premature wear of other transmission parts

Over time and with heavy use, these components can wear down. If slipping or damage is detected, it’s important to replace the kit to avoid potential transmission repairs.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Washer Capacitor is an OEM replacement part for Whirlpool washing machines. It is an essential electrical component that plays a crucial role in starting and running the washer motor efficiently.

Symptoms of a bad washer capacitor include:

• The washer not starting or failing to run
• Humming or buzzing noises from the motor during operation
• Error codes or indicators related to motor or electrical issues

Causes of a faulty capacitor can range from normal wear and tear over time to electrical surges, overheating, or physical damage.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

The Vacuum Break Inlet Hose is an OEM part for Whirlpool washing machines. This hose is designed to prevent backflow of water into the washer, ensuring that water flows in the correct direction during the wash cycle. It plays a crucial role in maintaining the efficiency and hygiene of the washing process.

Common causes of a bad hose include regular wear and tear, exposure to harsh detergents, or accidental punctures. A compromised hose can lead to water flow issues and potentially contaminate the wash water.

Symptoms of a bad vacuum break inlet hose include:

• Water leakage around the hose area
• The washer not filling properly
• Backflow of water into the washer
• Reduced water pressure during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.