Kenmore Refrigerator 596.77609801 (59677609801, 596 77609801) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627985
The Icemaker Cycling Thermostat is an OEM part for Whirlpool refrigerators. This thermostat plays a crucial role in the icemaker's operation by monitoring the temperature in the icemaker and ensuring it is at the appropriate level for proper ice production. It reads the temperature to determine when the icemaker should cycle on and off.
Causes of a bad icemaker cycling thermostat can include electrical malfunctions, temperature sensor issues, or wear and tear.
Symptoms of a bad icemaker cycling thermostat may include:
- Inconsistent ice production.
- The icemaker not cycling properly.
- The icemaker not dumping the ice into the ice bin.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W11368721
Black for Right Hand Door
The Gasket-FIP (BLK) is an OEM part for Whirlpool refrigerators. This gasket is designed to create a tight seal around the refrigerator or freezer door, helping to maintain the internal temperature by preventing cold air from escaping and warm air from entering.
Causes of a bad gasket can include wear and tear over time, cracks or tears from frequent door openings and closings, and deformation due to improper cleaning or handling. A compromised gasket can lead to energy inefficiency, increased frost build-up, and higher utility bills.
Symptoms of a bad gasket include:
- Warm spots inside the refrigerator or freezer
- Excessive frost or condensation buildup
- The door not sealing properly or gaps in the seal
- Higher than usual energy consumption
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: For WHITE gasket, order W10830189.
Do-It-Yourself Stories from Customers like You
Refrigerator door gaskets were torn Robert G. • Willowick , OH • December 04, 2018
I searched online for replacement parts and Appliance Parts Pros had the part in stock. Before I ordered the part, I watched the video to see if I could handle the repair. I ordered the part and soaked the gaskets with warm water in the tub. The old gaskets had a much simpler setup, so no cutting was involved. I simply pulled the old gasket out of the track without issues, and installed the new one with finger pressure. Per the video, I took both doors off. However, due to the design, I could...
Read more
More
$119.56
- Compare At:
-
$143.47
- You Save:
-
$23.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003405
The Refrigerator Pivot Block is an OEM part for Whirlpool refrigerators. It supports the door hinge, allowing the refrigerator door to open and close smoothly. The pivot block ensures that the door stays aligned and securely attached to the refrigerator frame.
Causes of a bad pivot block can include wear and tear over time, heavy use, or damage from accidental impacts. Misalignment or excessive force when opening and closing the door can also contribute to its failure.
Symptoms of a bad refrigerator pivot block include:
- The refrigerator door not opening or closing properly
- A misaligned door that doesn't seal correctly
- Unusual noises when the door is operated
- The door feeling loose or wobbly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Buttons on control panel did not work some parts missing Suzan F. • Lexington , NC • November 17, 2015
We turned off the circuit breaker. We then removed the light cover and then the control panel. We disconnected the Keyboard, Utah, plugged in the new one and turned the breaker on to see if everything worked. We realized that we did not need a new jazz board so that is being returned. The old Keyboard was removed, the new one attached and all the parts were put back. The frig works fine now at the recommended settings of zero and 38F.
Read more
More
$10.43
- Compare At:
-
$12.52
- You Save:
-
$2.09
Genuine Whirlpool part
By: Whirlpool
Part Number: W11024089
The Evaporator Motor is an OEM replacement part for Whirlpool refrigerators. It is a vital component that powers the evaporator fan, which circulates air over the evaporator coils to provide cooling within the refrigerator compartments.
Symptoms of a need to replace the evaporator motor:
- Inadequate cooling or uneven temperature distribution within the refrigerator
- Loud noises or excessive vibrations coming from the evaporator area
- Complete failure of the refrigerator to cool or maintain temperature
Causes of a faulty evaporator motor can include general wear and tear, electrical malfunctions, bearing failures, or physical damage from impact or foreign objects.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
The bottom freezer is working fine refrigerator is warm. John Paul H. • Glen Burnie , MD • September 18, 2022
If the freezer is cold and the fridge is hot, logic would indicate that the fan blowing the cold air from the freezer into the refrigerator is not working. Searched the ApplicancePartsPros.com website for a fan in the freezer compartment and found the video on how to replace one.
Followed the steps in the video to get the freezer partially disassembled and found the whole back of the freezer frozen over. Plugged the refrigerator back in and verified that the fan was not working.
Unplugged...
Read more
More
$50.31
- Compare At:
-
$59.87
- You Save:
-
$9.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006524
The Water Filter Head and Tube Assembly is an OEM part for Whirlpool refrigerators. This part is designed to house the water filter, ensuring that water entering the refrigerator is properly filtered before being dispensed or used to produce ice.
Causes of damage to the water filter head and tube assembly can include normal wear and tear, excessive force when installing or removing filters, or damage from water pressure fluctuations.
Symptoms of a bad Water Filter Head and Tube Assembly include:
- Difficulty in installing or removing the water filter
- Leaks occurring at the point where the water filter connects to the refrigerator
- Poor water flow from the dispenser or ice maker
- Unusual noises when the water dispenser is used, pointing to potential issues with the assembly or filter fit.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Slow flow from water dispenser Scot E. • Noblesville , IN • September 02, 2014
We were experiencing slow water flow from our Whirlpool interior water dispenser. The water would flow normally for a couple of seconds then subside to a trickle. After replacing the water filter and inlet valve, research suggested that the water filter head could be the culprit.
In about 30 minutes, I was able to remove the old part and replace with a new part solving the problem.
Read more
More
$94.35
- Compare At:
-
$111.33
- You Save:
-
$16.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10196393
The Damper Control Assembly is an OEM part for Whirlpool refrigerators. This component regulates the flow of cold air from the freezer compartment to the refrigerator compartment, ensuring consistent and optimal temperatures throughout the appliance. It plays a critical role in maintaining the balance between freezer and refrigerator temperatures.
Common causes of a bad damper control assembly include electrical malfunctions, physical damage to the damper, or wear and tear from regular use. Over time, the motor or the damper flap can fail, leading to improper air regulation.
Symptoms of a bad damper control assembly include:
- Inconsistent temperatures between the freezer and refrigerator compartments
- The refrigerator being too warm or too cold
- Frost buildup in the refrigerator compartment
- The damper making unusual noises or not moving as it should
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Loud noise on circulation fan starting up; noise was in refer not freezer Robert S. • Saint James City , FL • January 26, 2015
I determined that the motor that drives the damper valve that allows cold air into the refer was noisy. I ordered the replacement part from AppliancePartsPro.com. It arrived within 3 days and I changed the units out, which took about 10 minutes total. All is quiet with the refer now.
Read more
More
$101.26
- Compare At:
-
$120.50
- You Save:
-
$19.24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10436252
The Gasket-FIP (black) is an OEM part for Whirlpool refrigerators. This gasket is designed to create a tight seal around the refrigerator door, ensuring that cold air stays inside while keeping warm air out. By maintaining an effective seal, it helps the refrigerator maintain consistent internal temperatures and improves energy efficiency. The gasket measures approximately 23 x 34-3/4 inches.
Common causes of a bad gasket include frequent door openings, buildup of dirt and grime, or natural wear and tear over time. A compromised gasket can lead to air leaks, causing the refrigerator to work harder to stay cold and potentially leading to higher energy bills.
Symptoms of a bad door gasket include:
- The refrigerator door not sealing properly
- Visible cracks, tears, or deformities in the gasket
- Increased condensation or frost buildup around the door
- Higher than usual energy consumption
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gasket to lower freezer section worn out Robert S. • Hallandale Beach , FL • January 26, 2015
1. Ordered new gasket.
2. Heated with blow dryer gasket until it resumed its normal shape.
3. Turned off refrig.
4. Cleaned freezer compartment.
5. Removed old gasket.
6. Installed new gasket.
7. Turned on refrig.
8, Operation back to normal in about 6 hours.
Read more
More
$138.44
- Compare At:
-
$178.05
- You Save:
-
$39.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12722803B
Color: Black
The Door Guide is an OEM part for Whirlpool refrigerators. It helps to guide and align the refrigerator door during opening and closing, ensuring a smooth and secure fit that maintains the seal and efficiency of the refrigerator.
Causes of a bad door guide can include wear and tear from regular use, physical damage from accidental impact, or misalignment due to improper handling or installation.
Symptoms of a bad door guide include:
- Difficulty in opening or closing the door
- The door not sealing properly
- Visible damage or misalignment of the door guide
- Unusual noises during door operation
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door was not closing correctly all the time Kirk F. • Plano , TX • April 05, 2015
Looked for parts online that were worn and compared prices. Best price was appliance part pros. Ordered and received in 2 days and easily replaced worn parts.
Read more
More
$140.58
- Compare At:
-
$165.88
- You Save:
-
$25.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003854
The Crisper Shelf Frame is an OEM part for Whirlpool refrigerators. It supports the crisper drawers and holds the glass shelf above them, providing stability and organization for your fresh produce.
You should replace this crisper shelf frame if it becomes damaged or broken. Causes of a bad crisper shelf frame can include excessive weight placed on the shelf, accidental impact, or wear and tear over time. A damaged shelf frame can compromise the structural integrity of the crisper drawers and lead to further issues with storage.
Symptoms of a bad Crisper Shelf Frame include:
- Cracks or breaks in the frame
- Difficulty in sliding the crisper drawers
- Sagging or misalignment of the glass shelf
- Inability to properly support the contents
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken refridgerator interior plastic parts causing issues Jim M. • Portland , OR • September 28, 2025
Looked up parts based on fridge model number, watched videos, and replaced parts using just a few tools... easy. Parts came quick, well packaged.
After 16 years, plastic parts deteriorate and break. The fridge was operating fine, but the drawers and covers were failing. Much cheaper to replace a few parts ($$-$$$) than buy a new fridge ($$$$). The new parts matched up exactly to old ones. The videos were very helpful, but not perfect... for the Crisper Frame, there was a structural metal...
Read more
More
$156.43
- Compare At:
-
$184.59
- You Save:
-
$28.16
Genuine Whirlpool part
By: Whirlpool
Part Number: W10443319
The Freezer Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms a tight seal around the freezer door, preventing warm air from entering and cold air from escaping, thus maintaining the optimal temperature inside the freezer.
Causes of a bad freezer door gasket can include wear and tear over time, exposure to extreme temperatures, or damage from frequent opening and closing of the freezer door. A compromised gasket can lead to inefficient cooling and increased energy consumption.
Symptoms of a bad freezer door gasket include:
- Frost buildup inside the freezer
- The freezer door not closing properly
- Increased energy bills due to the appliance working harder to maintain temperature
- Warm spots or inconsistent cooling within the freezer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Frost beginning to form inside bottom freezer around door seal Arthur C. • Myrtle Beach , SC • October 15, 2016
Purchased replacement door gasket (seal). Pulled old gasket from its groove
around door. Easily pressed the replacement gasket into the empty groove.
Repair complete.
Read more
More
$199.95
- Compare At:
-
$239.94
- You Save:
-
$39.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67006531
The Dual Water Inlet Valve is an OEM part for Whirlpool refrigerators. This valve controls the flow of water into the refrigerator's ice maker and water dispenser, ensuring the proper functioning of both features.
Causes of a bad dual water inlet valve can include mineral buildup from hard water, electrical malfunctions, or wear and tear from regular use. Physical damage or leaks can also compromise the valve's performance.
Symptoms of a bad dual water inlet valve include:
- No water flow to the ice maker or water dispenser
- Slow filling or low water pressure in the dispenser
- Leaking water around the valve area
- Ice maker not producing ice
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Water on floor around refrigerator Ronald O. • Saginaw , MI • September 25, 2015
Being an ex maintainence. person, I went down and turned off the water supply. Then I started to try to find the leak by removing the rear covers for the compressor and valves. Once removing a couple of covers where the dual valve was, I spotted where the water was coming from.I then pulled the electrical plug from the wall. Between the solenoid and valve. I removed the screws that held the valve in place. Then disconnected the three hoses going into valve and removed the two electrical...
Read more
More
$129.52
- Compare At:
-
$155.42
- You Save:
-
$25.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W11613295
The Motor-Condenser Fan is an OEM part for Whirlpool refrigerators. This motor drives the condenser fan, which is essential for cooling the compressor and expelling heat from the refrigerator. By maintaining optimal temperatures within the cooling system, it ensures the efficient operation of the refrigerator.
Over time, the motor-condenser fan can fail due to electrical issues, wear and tear, or exposure to dust and debris. A malfunctioning fan motor can lead to overheating and reduced cooling efficiency.
Symptoms of a bad motor-condenser fan include:
- The refrigerator running continuously or not cooling properly
- Unusual noises from the back of the refrigerator
- The compressor overheating
- Poor airflow around the condenser coils
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings in condenser fan motor Glenn S. • Eagleville , PA • November 22, 2015
I bought the listed condenser fan motor for my Maytag refrigerator. Access to the condenser fan is by removing sheet metal screws of bottom panel with 1/4 in. nut driver. Condenser fan is on left side of rear access area. Remove electrical connector by pressing-in connector release tab with thumb fingernail and pulling on connector. Remove three mounting screws with 5/16 nut driver. Work fan out to the right past the compressor. I used a pair of pliers, as a lever, behind the plastic fan blades...
Read more
More
$60.95
- Compare At:
-
$72.53
- You Save:
-
$11.58
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001668
The Water Filter Backing Plate is an OEM part for Whirlpool refrigerators. It supports and secures the water filter, ensuring it stays in place and functions correctly to provide clean, filtered water.
Over time, the backing plate can become damaged due to regular use, exposure to moisture, or physical impact. A compromised backing plate can lead to improper positioning of the water filter, potentially causing leaks or reduced filtration efficiency.
Symptoms of a bad Water Filter Backing Plate include:
- Water filter not fitting securely or properly
- Leaks around the water filter area
- Reduced water flow or filtration issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water filter holder was broken John B. • Chester , VA • June 04, 2015
Used screwdriver to push in plastic tabs holding old unit to the top of the refrigerator box
Read more
More
$15.65
- Compare At:
-
$18.47
- You Save:
-
$2.82
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.
Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.
Symptoms indicating the need for Appliance Touchup Paint include:
- Visible scratches or chips on the appliance surface
- Areas of exposed metal prone to rust
- Blemishes that affect the overall aesthetic of the appliance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$12.55
- Compare At:
-
$15.06
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10534155
The Kickplate Grille is an OEM part for Whirlpool refrigerators. It is installed at the base of the refrigerator and serves to cover and protect the lower ventilation area, helping to ensure proper airflow to the condenser and other components. It measures approximately 37 inches wide, 2 inches high, and 4 inches deep.
You should replace the kickplate grille if it becomes damaged or broken. Causes of a bad kickplate grille can include accidental impacts, wear and tear over time, or exposure to cleaning chemicals that can weaken the material.
Symptoms of a bad kickplate grille include:
- Visible cracks or breaks in the grille
- Loose or unstable attachment
- Obstructions in airflow leading to poor refrigerator performance
- Accumulation of dust and debris behind the grille
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Replace bottom grill plate Jamie A. • Prior Lake , MN • June 18, 2019
Called in. Talk to a sale rep. Told them the model number, told me that this part would work. Shipped it to me. Snapped it in about 30 seconds. Part was perfect.
Read more
More
$66.65
- Compare At:
-
$79.31
- You Save:
-
$12.66