Kenmore Dishwasher 665.15595790 (66515595790, 665 15595790) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676453
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Do-It-Yourself Stories from Customers like You
Tines on my dishwasher rack was rusting rust was showing on my dishes Jean M. • Lenoir , NC • January 10, 2015
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines.
Read more
More
$30.95
- Compare At:
-
$37.14
- You Save:
-
$6.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 675679
Color: White. Includes 125 caps used to cover damaged tips on your dishracks. For blue order 12022. For grey order 676458. To attach these tine tips you will need to order the dishrack white touch-up paint WP676453.
Do-It-Yourself Stories from Customers like You
Tines on my dishwasher rack was rusting rust was showing on my dishes Jean M. • Lenoir , NC • January 10, 2015
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines.
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369769
Dishwasher door panel insert. Reversible: white color on one side, black on the other.
Do-It-Yourself Stories from Customers like You
Rusted out front panels but dishwasher still working perfectly so kind of a waste to buy a new dishwasher Dennis Y. • Torrance , CA • October 13, 2014
Bought new top and lower front panels, removed/replaced rusted out panels & now dishwasher looks good as new! Only $34 from Appliance Parts Pros. Better than spending $500 on a new dishwasher.
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3376397
Included with nut.
Do-It-Yourself Stories from Customers like You
Inadequate cleaning of dishes / detergent residue all over the interior Randy N. • Elkhart , IN • September 19, 2015
I cleaned all the jet nozzles with a toothpick and a pipe cleaner to remove the hard water deposits. I then replace the ring bearing under the bottom spray wand and the ring bearing under the upper spray wand. I also replaced the smaller radial ring bearing. Although none of them looked overly worn, it doesn't take much to cause the spray wands to spray inadequately.
Then, I replaced the float and washer assembly. Although it appeared to work properly when I lifted up on it and let it down, it...
Read more
More
$65.64
- Compare At:
-
$78.11
- You Save:
-
$12.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Broken handle foot pedal and missing parts Donald M. • Lake Arrowhead , CA • April 05, 2015
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy!
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3374343
This dishwasher door spring restores proper counterbalance so the door opens smoothly and doesn't drop. The premium version provides the factory-specified tension used on select models for consistent, controlled door movement.
- Counterbalances the door for smooth opening and closing
- Helps prevent the door from slamming open or feeling heavy
- Supports stable, mid-position hold when springs are intact and matched
- Common signs of failure: door drops quickly, is hard to lift, or won't stay in position
What's included: 1 door spring Installation notes:
- Disconnect power and water; remove the toe kick/access panel to reach the springs
- Note which frame/hinge holes the old spring used and install the new spring in the same positions to match tension
- Use pliers to relieve tension safely; if your model uses two springs, replace both for balanced operation
- Wear gloves and eye protection; keep hands clear of moving hinges
Do-It-Yourself Stories from Customers like You
The dishwasher door spring broke. Rachael T. • Junction City , OR • November 07, 2022
I ordered the parts, deciding that if one spring had broken, the other one should probably be replaced at the same time. I followed the suggestion of ordering the door spring bearing given on the ordering page, and since I had not yet pulled out the dishwasher, did not know that it was not used in this older model. However, the order arrived quickly (4 days), and they are genuine Whirlpool, made in the USA, parts. The access to the sides of the dishwasher where the springs are attached...
Read more
More
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3379673
This felt door vent seal fits around the dishwasher's door vent to help contain steam and moisture within the inner door. Replacing a worn seal helps prevent minor leaks and condensation around the vent area during cycles.
- Creates a gasket between the vent assembly and inner door panel to keep steam directed through the intended vent path
- Reduces moisture escape that can cause drips or water spots on the outer door or nearby countertop
- Helps limit condensation or musty odors from trapped moisture inside the door panel
- Indicators of failure include visible wear or separation of the felt and moisture around the vent during operation
What's included: 1 felt door vent seal Install notes:
- Disconnect power and turn off water supply before servicing the dishwasher
- Remove the inner door panel to access the vent assembly
- Note the seal's orientation; clean mating surfaces; seat the new felt evenly around the vent with no gaps
- Reassemble and run a short test cycle to check for leaks at the vent area
Do-It-Yourself Stories from Customers like You
Water leak from the right side of the dishwasher door Delbert T. • Bloomfield , IA • August 28, 2015
Replaced the felt seal and door vent assembly by removing the inside panel of the door and cleaning off the old seal and replacing with the new one. The vent assembly simply snapped out and was easy to replace with the new one. No more leaks and Mother was happy. Removal of the screws required a torx screw driver and someone to hold the door open while the panel was replaced. Easy fix.
Read more
More
$7.63
- Compare At:
-
$9.08
- You Save:
-
$1.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10082896
Includes washers.
Do-It-Yourself Stories from Customers like You
Whirlpool dishwasher no drying cycle heat John W. • Crestwood , KY • April 02, 2017
Replacement heater element installed exactly as described in the AppliancePartsPros video.
Read more
More
$75.64
- Compare At:
-
$89.26
- You Save:
-
$13.62
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369000
This upper draw bar is a door-latch linkage piece used in dishwashers. It connects the handle/actuator to the latch mechanism so the door closes securely and the door switch engages, allowing the cycle to start reliably.
- Links the door handle/actuator to the latch for positive closure
- Helps ensure the door switch is engaged so the unit will run
- Restores proper latch alignment and handle feel
- Common symptoms: door won't latch or pops open, dishwasher won't start, must push/hold door to run, loose or floppy handle
What's included: 1 upper draw bar Installation notes:
- Disconnect power at the breaker; turn off water supply if working near the inlet
- Open the door and remove inner-door screws to access the latch linkage
- Note bar orientation; transfer any clips/bushings and reuse existing hardware
- Reassemble and check latch engagement before running a cycle
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3374077
Size: 7 foot long.
Do-It-Yourself Stories from Customers like You
Bought a used dishwasher in excellent shape that needed the drain pieces to get it going Johnny R. • San Antonio , TX • April 14, 2015
Bought the parts and connected same...a breeze in finding and receiving and eventually installing these parts.
Read more
More
$62.78
- Compare At:
-
$74.71
- You Save:
-
$11.93
Genuine Whirlpool part
By: Whirlpool
Part Number: 350956
Almond. Size: 13 oz. can. Acrylic appliance paint.
Do-It-Yourself Stories from Customers like You
Age no money to fix it Ronald V. • Cape Coral , FL • August 01, 2015
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !!
Read more
More
$30.52
- Compare At:
-
$36.32
- You Save:
-
$5.80
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10348413
This replacement screw secures appliance panels and components so they stay tight and aligned. Replace a missing, rusty, or stripped fastener to restore a solid hold and reduce vibration or rattling during operation. What it does:
- Fastens and secures panels, brackets, trim, or internal components as specified for your model
- Replaces missing, corroded, or stripped hardware to restore a proper fit
- Helps prevent vibration, rattling, and misalignment caused by loose fasteners
- Addresses issues like a loose panel/handle or a screw head that's rounded off
What's included:
Install notes:
- Disconnect power; if applicable, shut off gas and water before servicing
- Use the correct driver size; start by hand to avoid cross-threading
- Tighten snugly—do not overtighten into plastic or thin sheet metal
- Keep track of original screw locations and lengths during reassembly
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP719929
This small check ball sits inside a check valve to allow one-way water flow. Replacing a worn or missing ball helps prevent backflow and supports reliable draining performance between cycles.
- Maintains one-way flow through the valve to stop water from returning after the pump stops
- Helps ensure complete, consistent draining
- A damaged, swollen, or missing ball can let water back up into the tub/sump
- Contribute to slow or intermittent draining and unusual gurgling/flow noises
What's included: 1 check ball. Install notes:
- Disconnect power and shut off water before servicing
- Access the check valve assembly per your model's service information (commonly at the sump, pump outlet, or drain connection)
- Clean the valve seat/passage; remove debris that could prevent sealing
- Place the ball in the valve seat as shown in your model's parts diagram; reassemble and test for leaks and proper flow
Do-It-Yourself Stories from Customers like You
Dishwasher didn't drain Frank C. • Mcallen , TX • June 02, 2016
Cleared out trash from pump.
Made E-Z by your exploded views and videos. Replaced worn parts.
Read more
More
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W10428773
This circulation pump and motor assembly moves wash water through your dishwasher's spray arms to clean dishes. Replace a worn or seized wash motor to restore proper spray pressure, quieter operation, and consistent cleaning performance.
- Circulates wash water through the spray arms during wash and rinse cycles
- Restores cleaning performance when the original wash motor won't run or is weak
- Typical symptoms: no/weak spray action, dishes still dirty, loud humming or grinding during wash
- Leaks at the pump housing or shaft area can indicate the assembly has failed
What's included: 1 circulation pump and motor assembly Install notes:
- Disconnect power at the breaker and shut off the water supply before servicing
- Remove the toe panel and slide the dishwasher out to access the underside
- Have a towel or pan ready for residual water; disconnect wiring and hoses, noting their orientation
- Transfer and secure existing clamps/mounting hardware as needed; ensure seals are properly seated and test for leaks after reassembly
Do-It-Yourself Stories from Customers like You
Blown dishwasher pump. Paul M. • Littleton , CO • December 10, 2018
I called AppliancePartsPros, talked to a technician to validate problem, ordered part.
I had a great talk with the technician. Told him I have electrical engineering experience, used to fix pinball machines and that the pinballs and home appliances were the same design, i.e. inductor in series with a switch across the hot lines. After that the conversation was like two long lost cousins talking at a family barbeque! Great customer service!
Read more
More
$343.73
- Compare At:
-
$407.65
- You Save:
-
$63.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP72107
Color: Almond
Do-It-Yourself Stories from Customers like You
Broken meat drawer Jesse B. • Stow , MA • January 26, 2015
Replaced. Shippping was very fast. A good experience.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84