Samsung Range FER700WX Parts
Genuine Samsung part
By: Samsung
Part Number: DG32-00002B
Fixes oven not heating properly or temperature running too hot or cold. Monitors oven temperature for accurate cooking. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
The oven temperature wasn't regulating Ivan H. • New Florence , PA • January 27, 2015
Order the one part (sensor)
Read more
More
$87.71
- Compare At:
-
$104.37
- You Save:
-
$16.66
Genuine Samsung part
By: Samsung
Part Number: DG96-00110E
Fix a noisy convection fan or fan that won't spin. This motor restores even heating in your range or wall oven. 15-minute DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
Lower convection fan not working William B. • Stuart , FL • November 22, 2021
Diagnosed the problem by seeing the lower fan was not turning. Didn't have any squeaks or sounds as a warning sign... It just stopped working. Went to AppliancePartsPros.com typed in my make & model number (Samsung NE58F9710WS). The web site pulled up the parts schematic, I navigated to the part on the schematic (Assembly #8 - Assy Motor Convection-Re DG96-00110B / AP5580897) and ordered it "Express Shipping" because I need the oven for Thanksgiving. When the part arrived, it looked identical...
Read more
More
$150.65
- Compare At:
-
$177.77
- You Save:
-
$27.12
Genuine Samsung part
By: Samsung
Part Number: DG44-01002A
Fix burners stuck on high or not responding to temperature adjustments. This range infinite switch restores precise heat control. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Missing segments in display oven not holding temperature setting burner always on high David S. • Palm Harbor , FL • September 24, 2016
After removing the top rear access panel, I took as-built photographs of the two components to be replaced showing all wires, connectors and screws!
The Energy Regulator for the front left burner was replaced first, noting the orientation before pulling off the knob, and removing the retaining screws. I used long nose pliers to gently remove one lead at a time and reconnect to the new regulator. Checked orientation against the photo, reinstalled regulator and knob.
Main PCB Assembly was...
Read more
More
$144.95
- Compare At:
-
$173.94
- You Save:
-
$28.99
Genuine Samsung part
By: Samsung
Part Number: DE47-20037A
Range won't heat or overheats? This high limit thermostat regulates oven temperature to prevent overheating. Easy DIY repair, typically 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Samsung electric range door would not open after cleaning cycle Christopher H. • Breckenridge , CO • September 15, 2014
With the help of several You Tube videos I was able to diagnose the problem. Diagnosis was confirmed with the help of a multi-meter. The thermo fuse was dead. I ordered the part from Appliance Parts Pros on Wednesday and it arrived via UPS on Friday afternoon. The fuse was very easy to remove and replace and my range was up and running in less than 15 minutes. Local repair service wanted $100 to do the diagnosis plus parts plus a return trip for installation. I got the part from Appliance Parts...
Read more
More
$29.75
- Compare At:
-
$35.70
- You Save:
-
$5.95
Genuine Samsung part
By: Samsung
Part Number: DG31-00005A
Fix buzzing fan noise or no convection heat in your range. This convection fan motor restores proper airflow. DIY-friendly, installs in 20 minutes.
This part fixes the following symptoms
-
Oven not heating evenly
-
temperature not accurate
See more...
Do-It-Yourself Stories from Customers like You
Fan was making a weird noise Raymond A. • Brookville , OH • February 19, 2016
First I did a search for my model stove, I read the discriptions of what it was doing and came to the conclusion it was the fan motor. I then called an appliance dealer in my local area to find out that the fan motor cost all most double what I could get it online. I called to see how much it would cost to have a repair man come out and fix it, which would have cost 260 dollars. So in one of the suggested comments that someone previously left it stated that it could be done in about 20...
Read more
More
$144.40
- Compare At:
-
$173.28
- You Save:
-
$28.88
Genuine Samsung part
By: Samsung
Part Number: DG47-00020B
Oven not heating or heating unevenly? This hidden bake element restores proper bottom heat. Easy DIY repair—replace from the back of the range.
This part fixes the following symptoms
-
Won't start
-
No heat
-
Oven not heating evenly
-
temperature not accurate
See more...
Do-It-Yourself Stories from Customers like You
Not heating. Wilford C. • Laie , HI • September 22, 2022
Replaced temp sensor and bake element. super easy!
Read more
More
$166.95
- Compare At:
-
$198.67
- You Save:
-
$31.72
Genuine Samsung part
By: Samsung
Part Number: DG47-00065A
Range burner not heating or stopped working? This triple surface heating element restores cooking power. DIY-friendly replacement part for Samsung ranges.
Do-It-Yourself Stories from Customers like You
Couldn't control burner temperature. Steven C. • Stevenson , WA • October 26, 2017
I replaced the two affected burners, and the problem was solved.
Read more
More
$223.95
- Compare At:
-
$264.26
- You Save:
-
$40.31
Genuine Samsung part
By: Samsung
Part Number: DG34-00006A
The Range Oven Door Switch is an essential component designed to maintain the safe and efficient operation of your range's oven door. This oven door switch detects whether the door is securely closed, ensuring that the heating elements activate only when appropriate. By using a genuine OEM part, you can be confident in its compatibility and reliable performance with a variety of Samsung range models. Replacing a faulty or damaged oven door switch with this genuine OEM part restores the proper functionality of your appliance, preventing accidental heating when the door is open and enhancing overall kitchen safety. Installation is straightforward, allowing you to quickly get your range back to working condition without the need for professional assistance. Investing in the Range Oven Door Switch ensures that your range operates smoothly and safely, providing peace of mind and maintaining the performance you expect from your appliance.
This part fixes the following symptoms
-
not self-cleaning
-
shuts off after a few seconds
See more...
Do-It-Yourself Stories from Customers like You
Door switch to activate light in a 1954 Tappan wall oven Joesph S. • Baden , PA • May 06, 2022
Replaced the switch.
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Samsung part
By: Samsung
Part Number: DG67-00018A
This is the fan blade that mounts onto the convection fan motor inside your oven and circulates hot air evenly throughout the oven cavity during convection cooking. Even heat circulation helps food cook more consistently and in less time. Replace it when your oven is not heating evenly, you hear an unusual noise during convection mode, or you can see the blade is cracked or damaged.
Do-It-Yourself Stories from Customers like You
Oven not heating correctly taking too long to heat Ken S. • Dothan , AL • February 09, 2016
Changed out the Fan. Oven turns all heaters on to quickly get to temperature - the sensor probe is next to the broil heater - it quickly senses the broil element heat and claims a false oven temperature and "reaches" set temperature at the sensor probe. Changing the fan causes the air to circulate during this time - so the entire oven heats up. The Fan is supposed run in Bake mode during heat up. The Fan blade nut is a left hand thread - turn CCW to tighten and Clockwise to loosen - RIGHTY...
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Samsung part
By: Samsung
Part Number: DG67-00028A
Fix noisy convection fan or uneven oven heating. This motor cap protects the fan motor in your electric range. DIY-friendly repair part.
Do-It-Yourself Stories from Customers like You
Oven not heating correctly taking too long to heat Ken S. • Dothan , AL • February 09, 2016
Changed out the Fan. Oven turns all heaters on to quickly get to temperature - the sensor probe is next to the broil heater - it quickly senses the broil element heat and claims a false oven temperature and "reaches" set temperature at the sensor probe. Changing the fan causes the air to circulate during this time - so the entire oven heats up. The Fan is supposed run in Bake mode during heat up. The Fan blade nut is a left hand thread - turn CCW to tighten and Clockwise to loosen - RIGHTY...
Read more
More
$6.51
- Compare At:
-
$7.81
- You Save:
-
$1.30
Genuine Samsung part
By: Samsung
Part Number: DG96-00173A
Range won't heat, smoking, or sparking from back panel? Failed terminal block causes these issues. Moderate DIY repair replaces charred connections.
Do-It-Yourself Stories from Customers like You
Short on terminal block of range Randy S. • Bella Vista , AR • December 12, 2016
Replaced terminal block and cord to range
Read more
More
$59.55
- Compare At:
-
$71.46
- You Save:
-
$11.91
Genuine Samsung part
By: Samsung
Part Number: 6021-001211
The Range Hexagon Cap Nut is an essential component for maintaining the functionality of your range. This genuine OEM part is specifically designed to ensure a secure and precise fit with Samsung ranges, providing peace of mind during repairs. Made from high-quality materials, the hexagon cap nut offers durability and strength, helping to keep your appliance stable and operating smoothly. Its easy installation process makes it a perfect choice for DIY enthusiasts looking to restore their range without hassle. By choosing the Range Hexagon Cap Nut , you are investing in a reliable solution that enhances the longevity of your appliance. This part not only replaces missing or damaged nuts but also ensures that all components are tightly secured, preventing potential issues in the future. Trust in this genuine OEM part to deliver the performance and reliability you expect from your Samsung range, making your repair experience straightforward and efficient.
Do-It-Yourself Stories from Customers like You
Needed to replace the top convection motor on my samsung electric range M David T. • West Grove , PA • May 01, 2020
Go inside the oven and remove the fan cover. Take the nut off of the fan (it may be a reverse nut), then remove the fan and the spacer. Open the back of the range, unplug the old fan motor and remove it (3 screws). Install the new fan motor assembly. The electric plug may not match up with the new motor, I cut the plug in half and put the 2 small plugs on the terminals. Back inside the oven, replace the spacer, fan and cover.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Samsung part
By: Samsung
Part Number: DE60-30016A
This is a flanged mounting nut used to secure internal components within a microwave oven. The flange provides a wider bearing surface to distribute clamping force and prevent loosening from vibration. Replace this nut if the original is stripped, corroded, or lost during a repair, as a missing or damaged fastener can allow components to shift or rattle.
Do-It-Yourself Stories from Customers like You
Noisy fan motor Gary K. • Renton , WA • November 26, 2018
Replaced both fan motors as I did not know which one was making the noise.
Read more
More
$6.56
- Compare At:
-
$7.81
- You Save:
-
$1.25
Genuine Samsung part
By: Samsung
Part Number: DG47-00043B
Burner not heating or outer ring stopped working? This range dual radiant heating element restores even heat distribution. Simple DIY repair.
Do-It-Yourself Stories from Customers like You
Outer ring of the burner stopped working Stephen B. • Evansville , IN • November 19, 2016
Replaced the heating element
Read more
More
$221.95
- Compare At:
-
$264.12
- You Save:
-
$42.17
Genuine Samsung part
By: Samsung
Part Number: DG44-01003A
This is a selector switch that controls a surface burner element on an electric range. It allows you to select different heating zones or power levels for a multi-ring burner. Replace this switch if the burner does not respond to the control knob, only heats on certain settings, or if the switch fails to cycle the element properly.
Do-It-Yourself Stories from Customers like You
Burner indicator light stays on always Joseph S. • Waldron , AR • August 02, 2015
Replaced DG44-01003A (AP4336838) Energy regulator. Fixed it with no problem.
It was the the big burner on my Samsung range that had three settings for pot size.
Read more
More
$197.95
- Compare At:
-
$235.56
- You Save:
-
$37.61
Genuine Samsung part
By: Samsung
Part Number: 6021-001208
The Range Hexagon Nut Cap is an essential component for maintaining the integrity of your Samsung range. Designed as a genuine OEM part, this hexagon nut cap ensures a precise fit and reliable performance in your appliance. The durable construction of the NUT-H provides secure coverage over the range's hexagon nuts, protecting them from dust, spills, and daily wear. By replacing a worn or damaged nut cap with this genuine OEM part, you can restore the appearance and functionality of your range without compromising on quality. Compatible with various Samsung range models, the Range Hexagon Nut Cap offers easy installation, allowing you to quickly address any issues and get your appliance back to optimal condition. Investing in this high-quality cap not only enhances the aesthetic of your range but also prolongs its lifespan by safeguarding critical components. Choose the Range Hexagon Nut Cap for a dependable solution that combines functionality and durability, ensuring your cooking range operates smoothly and looks great in your kitchen.
Do-It-Yourself Stories from Customers like You
The lower fan motor on my Samsung convection oven failed, then the top one went out as well. Peter A C. • Ocoee , FL • March 25, 2022
Ordered from a local shop and was a nightmare. Then I ordered the second one from AppliancePartsPros.com awesome!!
Read more
More
$9.57
- Compare At:
-
$11.39
- You Save:
-
$1.82