Samsung Washer WA5451ANPXAA Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10501250
Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Shift actuator Jesse M. • Nipomo , CA • October 04, 2025
With the video that was made from appliance pro.Help me out one hundred percent to understand what I was dealing with
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Samsung part
By: Samsung
Part Number: DC31-00098A
Fix 3E error codes or spinning issues with a rotor position sensor replacement. Detects motor position for smooth wash cycles. 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Bad hall sensor Eric P. • Odessa , TX • February 04, 2017
I watched the you tube video that completely explained how to do it. It was very easy to do.
Read more
More
$87.95
- Compare At:
-
$105.54
- You Save:
-
$17.59
Genuine Samsung part
By: Samsung
Part Number: DC97-16350D
Suspension damper rod assembly installs at the corners of the tub. Replace if cracked, broken, or worn to restore proper tub support and stability.
Do-It-Yourself Stories from Customers like You
Dc error code Genaro O. • Houston , TX • October 19, 2015
Washer started every cycle just fine. With just 9 minutes left on the cycle, when it started the spinning cycle it would stop and on the display showed a DC error code and it would kick the cycle to the beginning of the wash. After asking around and doing a little you tube research I called appliancepartspros.com and ordered http://www.appliancepartspros.com/samsung-assy-damper-owm-dc97-16350d-ap5579032.html ordered all 4. Replaced them and after that it the washer it being working just fine....
Read more
More
$53.44
- Compare At:
-
$63.59
- You Save:
-
$10.15
Genuine Samsung part
By: Samsung
Part Number: DC61-00201A
The Washer Bracket Nut is an essential component for maintaining the stability and functionality of your Samsung washer. This genuine OEM part is specifically designed to ensure a secure fit, helping to keep your appliance firmly in place during operation. Crafted with high-quality materials, the Bracket Nut offers durability and reliability, reducing the risk of loosening or damage over time. Its precise engineering allows for easy installation, enabling you to quickly restore your washer to optimal performance without the need for extensive repairs. By choosing this Washer Bracket Nut, you are investing in a part that seamlessly integrates with your Samsung washer model, ensuring compatibility and long-lasting support. Whether you're addressing a loose bracket or replacing a worn-out nut, this genuine OEM part provides the perfect solution to enhance your washer's stability and efficiency. Trust in the Washer Bracket Nut to deliver the dependable performance you expect from your Samsung appliance, ensuring a smooth and reliable laundry experience.
Do-It-Yourself Stories from Customers like You
Washer made a banging noise and danced to the beat around the laundry room in spin cycle. Richard S. • Lansdale , PA • January 02, 2021
Needed to replace washer counter balance. Also order shock absorbers in case they needed to be replaced, fortunately they didn't need replacement and will be returned. I used Appliance Parts Pros many time and always found them to be very helpful and the repair videos are very helpful.
Read more
More
$6.04
- Compare At:
-
$7.08
- You Save:
-
$1.04
Genuine Samsung part
By: Samsung
Part Number: DC61-01722B
Adjustable leveling leg installs on the bottom of your washer. Replace if broken, cracked, or snapped off. Allows height adjustment for stability.
Do-It-Yourself Stories from Customers like You
Broken washer leg Larry C. • Cape Girardeau , MO • October 05, 2016
Ordered a new leg from Appliance Parts & put it on.
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Samsung part
By: Samsung
Part Number: DC34-00025E
Washer won't start or shows LO/DC error? Lid lock assembly secures the lid during cycles and signals the control board. DIY-friendly repair with video.
This part fixes the following symptoms
-
Door latch failure
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Dc "spin" and lo "lid lock" error codes Matthew H. • Clarksville , TN • May 19, 2015
After watching the video it was strait forward. Just Pull the screws pop the lid swap the springs "grease them" and put it back together. I would suggest that you have a person help you mostly has a second pair of hands. The lid was over rear springs and it will save you some expletives to have the extra body. I had worn out springs and the load kept becoming unbalanced during spin cycles I just happened to coincide with the Lock mechanism failing. The motor drive for the lock stopped working....
Read more
More
$164.47
- Compare At:
-
$195.72
- You Save:
-
$31.25
Genuine Samsung part
By: Samsung
Part Number: DC96-01703C
Washer overfilling or not filling properly? The water level pressure switch controls fill cycles. Easy 15-minute DIY repair with our video guide.
This part fixes the following symptoms
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Samsung clothes washer wa456 code ie u6 John D. • Howard Beach , NY • February 28, 2015
This error code indicated faulty water level and wash cycles were exhibiting either no water or too much water. Saw utube vid using this part for this type of problem and so far the repair is working well. Part arrived in 2 days, it was the right part and the machine is working the way its supposed to so I'm very happy. The worst scenario would have been to hire a repair guy to rip me off for a "Johnson Rod" I didn't need.
Read more
More
$82.95
- Compare At:
-
$98.71
- You Save:
-
$15.76
Genuine Samsung part
By: Samsung
Part Number: DC60-50003A
If your washer basket spins loose or makes noise during spin cycle, this spin nut secures the wash basket. Critical for proper spin operation.
Do-It-Yourself Stories from Customers like You
Samsung clutch nut broke Cain M. • Porterville , CA • August 31, 2019
Got the part number but it was wrong not your problem. Samsung has part numbers wrong ordered the right one got here in 3 days installed it everything was good low price satisfied
Read more
More
$30.25
- Compare At:
-
$35.70
- You Save:
-
$5.45
Genuine Samsung part
By: Samsung
Part Number: DC93-00278B
The Washer Vibration Sensor Assembly is essential for maintaining the stability and performance of your Samsung washer. This genuine OEM part accurately detects and manages the vibration levels during wash cycles, ensuring your machine operates smoothly and efficiently. By replacing a faulty sensor with this high-quality assembly, you can prevent excessive shaking and potential damage to your appliance. The Washer Vibration Sensor Assembly is designed to fit a wide range of Samsung washer models, guaranteeing a perfect match and straightforward installation. With its reliable performance, this sensor helps extend the lifespan of your washer, providing peace of mind and optimal functionality. Investing in this genuine OEM part ensures that your Samsung washer continues to deliver excellent washing results while minimizing noise and movement. Whether youGÇÖre troubleshooting an existing issue or aiming to enhance your washerGÇÖs performance, the Washer Vibration Sensor Assembly offers a dependable solution for a better laundry experience.
Do-It-Yourself Stories from Customers like You
8e2 Joel V. • San Jose , CA • September 12, 2015
Bought the new sensor. Tipped the washing machine on its back which made the sensor easy to access. Remove two screws unplug the sensor replaced it screwed it back in and I was done. 15 minute repair with a $50 part. To have the repair person even come to the house would have been $80 plus parts and labor evidentially a second visit. The repair was simple and quick and I would read it as a begin her handyman job.
Read more
More
$93.49
- Compare At:
-
$112.19
- You Save:
-
$18.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WP89503
Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.
Do-It-Yourself Stories from Customers like You
Low water flow and fabric softener would dispense immediately when cycle started Bob G. • Sylacauga , AL • January 19, 2019
Replaced flow meter and control valve
Read more
More
$19.31
- Compare At:
-
$22.98
- You Save:
-
$3.67
Genuine Samsung part
By: Samsung
Part Number: DC60-40133A
Replace a bent or missing pulsator bolt that prevents proper agitator assembly. This washer bolt secures the pulsator mechanism for smooth operation.
Do-It-Yourself Stories from Customers like You
Pulsator needed to be replaced Ondean S. • East Hartford , CT • December 21, 2019
Ordered a new part and installed
Read more
More
$10.36
- Compare At:
-
$11.84
- You Save:
-
$1.48
Genuine Samsung part
By: Samsung
Part Number: 6002-000213
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
Do-It-Yourself Stories from Customers like You
Dryer would not start. John K. • Lawrenceville , GA • November 03, 2017
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh..
Be sure to keep track of all your screws.
BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person...
Read more
More
$6.41
- Compare At:
-
$7.56
- You Save:
-
$1.15
Genuine Samsung part
By: Samsung
Part Number: DC66-00680A
Covers the center hub in top-load washer tubs. Replace if yours is cracked, broken, or missing tabs to protect clothes from the washplate below.
Do-It-Yourself Stories from Customers like You
The small pegs of the pulsator cap on my samsung top load washer broke Danelle C. • Brentwood , TN • January 23, 2015
After finding the part no. and price on the Samsung website and I checked with Appliance Parts Pros and the part and shipping was considerably less. I ordered it from Appliance Parts Pros on a Monday and expected it to arrive in 5 to 6 days. I was thrilled to have it arrive in 2 days. My husband pushed the cap back on the hub of the drum.
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Samsung part
By: Samsung
Part Number: DC61-10673A
If water pools under your washer or drains slowly, a damaged drain cap may be the cause. This cap prevents leaks and controls water flow during cycles.
Do-It-Yourself Stories from Customers like You
He unit would shake like it was off balance Bernard M. • Lebanon , OR • November 24, 2015
At first I thought it was the bearing, but when I got it apart I found the main shaft had corroded from possibly the soap powder and bleach combo build up on the part.
After I cleaned it all up I found one of the three mounting braces was cracked and causing the unit to shake during the spin cycle.
Once I replaced that part and replaced a few missing parts I lost all found on your store the unit went together just as it came apart and works excellent.
Read more
More
$5.50
- Compare At:
-
$6.54
- You Save:
-
$1.04
Genuine Samsung part
By: Samsung
Part Number: 6002-000520
Self-tapping screw for appliance assembly and repairs. Secures handles, bins, shelves, and components. Replace missing or stripped screws during moves or repairs.
Do-It-Yourself Stories from Customers like You
Pieces to the oven handle broke Kathy M. • Lacey , WA • December 24, 2015
Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days.
Read more
More
$6.41
- Compare At:
-
$7.69
- You Save:
-
$1.28
Genuine Samsung part
By: Samsung
Part Number: DC60-60011B
This is a wave-shaped washer - a small, wavy metal disc used in the washing machine's mechanical assembly to provide spring tension and maintain proper spacing between components. It helps absorb vibration and keep parts securely in place during the spin and agitation cycles. Replace this part if you notice excessive vibration, looseness in moving components, or if the original washer is worn flat, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Wrong nut listed for this washing machine! Samsung washing machine had to remove tub from clutch/motor and ruin nut holding tub to clutch Timothy M. • Louisville , KY • October 06, 2018
For Samsung Washing clothes machine WA50F9A7DSP/A2
The large (about 1 inch) nut at the bottom of the tub that holds the tub onto the clutch/motor is NOT Appliance Parts Pros 6021-001573, described as NUT-HEXAGON M26 OD44 ZNDC1. This nut has a 24 mm internal diameter. It is marked ZNDC-1 MT26 70H on top of the nut and is left hand or reverse thread. It is slightly too small to thread onto the clutch shaft.
THE CORRECT NUT has a 26 mm internal diameter. That is Appliance Parts Pros...
Read more
More
$7.78
- Compare At:
-
$8.56
- You Save:
-
$0.78