Poulan Lawn Mower Parts

This is an auger shaft bearing that is used on many snowblowers created by Husqvarna. The auger shaft bearing connects to the auger plate. A bearing helps the shaft rotate easily inside of a snowblower. Through use or time, the auger shaft bearing can become damaged or break and will need to be replaced. If the bearing is damaghed, it can cause vibrating, wobbling, or binding and may prevent the shaft from rotating. Failed bearings also sometimes create a squealing sound coming from the snowblower.If any of these things are occurring with a snowblower, the auger bearing will need to be replaced. Place the blower on a flat, stable surface and disconnect the spark plug wire before beginning. The belt cover and auger belt will need to be removed along with the roller bracket. Remove the auger housing to get access to the auger shaft bearing to replace it. Reassemble the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual unit. The auger shaft bearing is made to be used with several snowblowers manufactured by Husqvarna.

This replacement part is a cable control. It is a genuine replacement part made by Husqvarna. This part is typically found in lawnmowers and allows the user to control the settings of the appliance by using the cable. This is attached to the engine and allows different settings and powers to be selected.A new control cable might be needed if the current one is damaged or missing. If the control cable is stripped from regular use over time, it is recommended that it be replaced. If the user is unable to control the appliance from the control cable, it can be due to a faulty cable. Be sure the engine is powered off completely before replacing it.This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

This replacement part is a cable assembly. This is a genuine replacement part made by Husqvarna. Cable assemblies are found in many types of machinery and are important to the overall use of the appliance. A new cable assembly might be needed if the current one is missing or damaged in any way. This can be due to normal wear and tear over time. The wires in cable assemblies are often worn down due to the nature of wires in general. Be sure the engine is completely turned off and work gloves are worn during this repair. This part is sold individually and is sourced directly from the manufacturer. This cable assembly is a genuine OEM replacement part to ensure proper fit.

This is a genuine replacement for the oil drain valve on select Husqvarna engines. The oil drain valve is connected to the oil pan and the drain, assisting with draining oil from the engine. As the oil passes through the drain valve, it can cause residue to build up over time. This is a metal part, but it can become damaged in many ways. The valve seals could become worn or faulty, creating leaks. In the event that it is no longer functioning, a replacement valve may be required. This OEM part will provide an exact fit for compatible engines. This genuine oil drain valve is manufactured by Husqvarna to exact standards and is compatible with many engines made by the brand. These engines are found in lawn tractors from brands like RYOBI, Weed Eater, Poulan, and Jonsered, as well. Allow the engine to cool completely and disable the spark plug(s) before beginning any engine repairs. This durable metal replacement part is sold as an individual unit and additional hardware and accessories are not included.

This is a manual cable clutch for use on many different kinds of lawn tractors and riding mowers. It is the part that connects the transmission lever to the idler arm on the deck of the mower. The sole purpose of this component is to engage and then to disengage the blades. It is for a machine with a manual clutch and includes the full assembly. This means it features the spring hook, connector clips with cable sheath, and the cabling itself. It is relatively simple to replace this item and requires an appropriately sized socket set. Made of rubber, metal, and wire, it is a genuine OEM part that ships individually as an assembly. It will work with brands like Poulan, Jonsered, Weed Eater, and Husqvarna, among others.

This part is a replacement auger paddle. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken or defective auger paddle in several varying models of snow blowers.The auger paddle rotates inside the snow blower housing and scoops snow up so it can be expelled in the desired direction. Because this part has regular contact with the ground, it can become worn down easily, thus requiring replacement. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this auger paddle, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This auger paddle can be used with snow blower models that have been manufactured by Husqvarna and Poulan. Sold individually.

This replacement part is a torsion spring. This is a genuine replacement part made by Husqvarna. This part works within a machine to provide torque to different parts so that the machine can run smoothly and properly. A new torsion spring might be needed if the current one is missing or damaged in any way including being dented or bent. Because of the nature of the spring, this part could snap under pressure and need to be replaced. Work gloves are recommended during this repair as springs can be dangerous if handled improperly. Be sure the engine is off before starting this repair as running parts may affect the installation.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part for long-lasting use.

This replacement part is a brake arm. It is a genuine replacement part made by Husqvarna. This brake arm is commonly found in different types of lawnmowers and allows the user to control the brake settings. This is an extremely important part of the lawnmower.A new brake arm might be needed if the current one is no longer connected to the machine. If the brake arm is damaged in any way, it might be difficult to operate the machine appropriately. If this is the case, it is recommended that the current part be replaced immediately. Be sure to wear working gloves during this repair. This part is sourced directly from the manufacturer and is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is meant to fit different lawnmowers.

This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

The chainsaw isolator kit is a spring mechanism that is designed to help reduce vibrations in the equipment while it is being used. Reducing vibrations makes the equipment more enjoyable to use and protects it from additional damage that could occur. This assembly can become worn over time, which will lead to increased vibrations and less stable use of the chainsaw. Replacing the isolator with this kit can alleviate the issues and provide a solution for many common issues. This genuine OEM isolator kit is manufactured by Poulan to exact standards so that it provides an exact fit for compatible models of chainsaws. It can be used with hundreds of chainsaws from Poulan, Jonsered, and Husqvarna. Refer to model diagrams for appropriate installation, placement, and part compatibility information. This is an individual part that is sold as a single unit. This isolator assembly includes all the parts needed for a full replacement: one bolt, two springs, and one isolator with a bar that includes two bolts for mounting. No additional parts or hardware will be required to go with this part replacement.

The carburetor is responsible for mixing the air and fuel before it enters the engine. It consists of intake and outflow valves, as well as a float and needle to monitor and manage the flow of fuel and air coming into and leaving the carburetor body. The fuel mixes with oil in the smallest part of the body and is then pushed through a butterfly valve into the engine. Adjusting the valve will adjust how much of the fuel mixture gets into the engine. In the event that an engine is not running or keeps stalling, the carburetor may need of repair or replacement. This kit is designed to assist with the repair or refurbishment of several carburetors in various chainsaws. It is a full carburetor, not a rebuild kit. Installation will require a screwdriver to replace the carburetor. This OEM carburetor assembly kit is compatible with a number of chainsaws from Husqvarna. The kite includes the carburetor body, along with the float, needle, gaskets, and seals that are all made to manufacturer standards, offering an exact fit for compatible models.

A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.

This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.