Poulan Parts

This is a genuine OEM clutch assembly sourced directly from the manufacturer; it is used in lawn mowers and lawn tractors to engage the blades. When the gear lever is pulled, the clutch engages. This causes the pulley wheel to spring out and tighten the blades against the turning drive shaft pulley, which then causes the blades to spin. If the clutch assembly is not working correctly, the blades will not move to cut the lawn. If the blades will not engage or if they are stuck and won't disengage, the clutch assembly should be replaced. This can occur if the clutch assembly overheats. Excessive use and normal wear and tear can also be the cause of a bad clutch. Before working on the clutch assembly, make sure the engine has had time to cool off to prevent burns. Remove the fuel from the fuel tank and fuel lines. Remove the spark plug to prevent accidental engine starting. Park the machine on a flat surface and chock the wheels to prevent rolling. Remove and replace the clutch assembly, then reinstall all parts and fuel. Check the clutch after replacement to ensure it is working properly.This clutch assembly is sold as an individual unit. It is compatible with lawn tractors and tractors manufactured by Craftsman, Husqvarna, and Poulan.

This harness light assembly is a genuine Husqvarna part, sold individually. This harness light assembly can be used as a replacement part in a lawn mower.The harness light assembly in a lawn mower might have to be replaced if the lights on the wire harness are damaged to a point that is beyond repair. If the lights are cracked, chipped, dented, punctured, eroded, warped, or otherwise damaged beyond functionality, this harness light assembly should be ordered as a genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM from the manufacturer. It is sold individually. This harness light assembly is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This genuine replacement part is a 8 x 1.75 inch radial MTD wheel. This radial wheel has 5 spokes, and is for use with lawn mowers. This part is the front wheel of the mower, and attaches to the front shaft of the mower to allow for good grip and smooth rolling, even on uneven ground. Over time, the wheels on a lawn mower can wear out or become damaged, reducing traction or affect the alignment of the mower. This OEM replacement part is made of high quality plastic, and is sourced directly from the manufacturer. This part is sold individually. Please shut off the engine of the mower before replacing this part. Allow the engine to cool before installing this part. Disconnect the spark plug to prevent the mower from accidentally starting. A wrench set is needed to install this part.This part is compatible with a variety of Craftsman, Husqvarna, AYP, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, and Weed Eater lawn mowers. Please note: original part numbers 1936166, 532435280, 532442640, 532447993, 583717501 are now obsolete, and the manufacturer has replaced the original part numbers with this part.

This replacement part is an ignition harness. It is a genuine replacement part made by Husqvarna. This ignition harness aids in helping the user start and stop the engine using the ignition. This part helps different parts connect so that the engine is able to start and stop effectively and smoothly during use.A new ignition harness might be needed if the current harness is becoming disconnected from certain parts or if the wires are stripped. It is common that this happens after years of normal wear and tear. If this is the case it is recommended that the user replace this part before it affects the engine in any way. This is a genuine OEM replacement part. This ignition harness is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This part is a clutch assembly that is used for riding lawnmowers and lawn tractors. A clutch is a safety device that stops the blade from spinning while the engine is still running. This part is manufactured out of a heavy-duty metal material.A new clutch assembly may be needed if the lawn tractor or riding lawn mower is stalling. Over time, the clutch may become worn or damaged and need to be replaced as part of normal wear and tear on the product. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This clutch assembly is a genuine Husqvarna part. It is sold individually. This particular clutch assembly is compatible with riding lawnmowers and lawn tractors that are manufactured by the Poulan, Husqvarna, and Jonsered brands.

This replacement part is a seat switch. It allows the user to control the settings on the seat in many kinds of lawn tractors. This ensures a comfortable user experience during any job. A new seat switch might be needed if the user is no longer able to control or adjust the seat on the lawn mower. This can be due to normal wear and tear, and it is not unusual for this part to wear out after years of use.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This replacement part is a return spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A return spring is an essential part of many different engines. This type of spring is able to stretch and allow two different parts to work together and ensure that the machine is running smoothly. A new return spring might be needed if there are unusual noises coming from the inside of the device. It is possible that the return spring is malfunctioning or out of place. It is common that this type of spring can become stripped and snap over time. Be sure the engine is cooled down prior to attempting this repair. This spring is sold individually and is sourced from the manufacturer to ensure a proper fit in many devices. This is also a genuine OEM replacement part.

This is a shield deflector, or a grass deflector, that is used on certain models of lawn tractors and walk-behind lawn mowers. The shield deflector is designed to ensure that the debris that expels from the mower deck is not projected upward or toward the person that is mowing. When it is cracked or missing, the clippings and debris could fly out in any direction and cause injury or damage. The shield deflector is made of durable plastic but it is also subject to constant vibrations and ground impact, which can lead to damage. Replacing a broken shield deflector will ensure that the mower is safe to use and that debris is not flying in all directions. This part will require a wrench or socket, as there are two screws or bolts holding it in place. This genuine OEM deflector is manufactured by Husqvarna and can be used with select machines from the brand, as well as certain models from Craftsman, Poulan, and Jonsered. It is sold as an individual part and the hardware to secure the deflector is sold separately.

This is a genuine OEM mulching blade sourced directly from the manufacturer; it is used on push mowers and riding lawn mowers. A mulching blade is used in place of a regular cutting blade to cut grass clippings finer so that the grass falls back onto the lawn and decomposes. Mulching is beneficial to lawns in many ways. It keeps the soil cooler and reduces water evaporation, meaning the lawn needs less water to stay green. Grass clippings can contain over 70 percent water. Mulching also provides added nutrients to the soil. Mulching blades are also time savers. There are no grass clippings to rake and dispose of after mowing the lawn.A wrench is needed to remove the cutting blade and install the mulching blade. The mower should be on a flat surface with wheel chocks to prevent rolling. Lift the mower deck with a jack to access the cutting blades. Wear gloves to protect the hands. Remove the cutting blade. Install the mulching blade. Lower the mower and remove the chocks. This 46-inch mulching blade is made of metal and sold as an individual unit. It is compatible with push lawn mowers and riding lawn mowers manufactured by Craftsman, Husqvarna, and Poulan

The snowblower is designed to remove snow from the surface over which it is run, but no snowblower is designed to totally eliminate all of the materials beneath it. Most leave a small skim coating that ensures the augers don't scrape along the ground and damage a walkway or drive. However, many are also equipped with a scraper bar that removes even more of the snow than the skid plates allow. If the scraper is damaged or bent, it will mean a less satisfactory performance by the blower. This is an OEM part that is very easy to install with little more than a properly sized screwdriver and a socket or wrench set. This replacement scraper bar is designed to fit many different snowblowers made by Husqvarna and Poulan, and works with more than 100 models. It ships individually with mounting hardware.

This is a replacement lawn tractor shield-deflector. The shield-deflector, or grass chute, is made from strong, high-quality plastic and attaches to the lawn tractor deck's side. Its purpose is to direct grass clippings and other debris away from the rider while mowing. Over time, the original shield-deflector can become worn and damaged, allowing debris to blow up onto the lawn tractor driver. Debris expelled from the lawn tractor can cause property damage, injury, or even death. Ensure the area is always clear of bystanders while mowing and consult the operator's manual to ensure proper installation of all replacement parts.This shield-deflector is designed to be a replacement for original worn or damaged shield-deflectors on AYP, Jonsered, Redmax, Craftsman, Poulan, Husqvarna, Poulan Pro, Weed Eater, and McCulloch 46-inch lawn tractor decks. This replacement shield-deflector is an OEM part that is sourced directly from the manufacturer. The shield-deflector is sold individually and does not come with hardware included. Tools needed for replacement may consist of; 1/2 inch socket, 7/16 inch socket, vise-grip pliers, a large flat-head screwdriver, and a hammer.

This part is a clean-out mounting clamp that is used on snowblowers. The purpose of the clean-out mounting clamp is to hold the clean-out tool. This component attaches to the auger housing and is manufactured out of a heavy-duty black metal material.A new clean-out mounting clamp may be needed if the original is cracked, broken, or damaged in any way. If the clean-out mounting clamp is missing from the snowblower, the operator may wish to replace this part out of convenience, although this part is not essential to the operation of the snowblower. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clean-out mounting clamp is a genuine Husqvarna part. It is sold individually. This specific clean-out mounting clamp is compatible with snow blowers that are manufactured by the Husqvarna, Poulan, and Jonsered brands.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.