Poulan Parts

This blade is a genuine Husqvarna part that fits various Husqvarna models. This blade can be used as a replacement part for lawn edgers, which are used to edge the areas of a lawn that are surrounded by or touching pavement.If the blade has made contact with the sidewalk, driveway, patio, garden, or other surface by which the lawn edger is passing, there is a chance that the blade will need to be replaced. Look for damage on the surfaces with which the lawn edger blades have made contact. Additionally, use the lawn edger and check if it its trimming and edging ability has declined or if there is a strange sensation in the feel and experience of trimming, such as a vibration coming from the equipment. If this is the case, the blade might have to be individually replaced. The appliance should not be used again until this replacement has occurred. Remember to always wear gloves when handling, repairing, and operating outdoor equipment such as lawn edgers.This blade is compatible with the brands Husqvarna, Weed Eater, and Poulan.

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

This air filter cover is a genuine Husqvarna part, sold individually. This air filter cover can be used as a replacement part for chainsaws. The purpose of an air filter cover is to prevent damage to the air filter; the air filter blocks the motor from taking in harmful external materials such as dirt, debris, and pebbles. Air filter covers are often replaced within the lifespan of a chainsaw as they can be subject to general wear and tear over time. If there are visible punctures, rips, or signs of erosion to the material, the air filter cover should be removed immediately and replaced with this genuine OEM replacement part. A broken air filter cover could cause further damage to the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air filter cover is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This throttle assembly cable is manufactured by Craftsman, but also used by Poulan, to regulate the flow of fuel to certain small gasoline-powered engines. This assembly houses the throttle trigger that is used by almost a dozen different machines, including not only trimmers, but also pole saws and other small gasoline-powered tools. Apart from the cutting edges of the pole saws and trimmers, the parts of these devices that sees the most wear and tear, and is most likely to fail, are the throttle assemblies. Whether banged about because of proximity to the throttle trigger or simply because it's the only part protruding from the mid-body of the typical weed cutter, the throttle assembly housing and cable are susceptible to failure. Most often, failure of the cable is the result of one of the buds, attached at the ends to clasp securely, having broken off. In this case, the gasoline engine may start, but will not rev or only does so sporadically. Replacing the cable is a matter of removing the throttle housing and trigger as well as detaching the cable from the carburetor. When replacing the cable, be sure to use one like this, which is a genuine OEM replacement part, manufactured to replicate the specs of the original.

This OEMspark arrestor kit includes all the parts needed to replace the spark arrestor. The spark arrestor is a device that prevents the emission of hot exhaust, hot particles, and hot debris (that could be flammable) from being expelled from an internal combustion engine.The spark arrestor contains a screen that may become clogged through normal use. Common signs that the spark arrestor screen may be clogged are a lack of power during use, poor acceleration, and engine misfires. Carbon may build up on the screen, which causes these problems. The operator may be tempted to try cleaning the screen, but it is not recommended; the failed part needs to be replaced.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on other Husqvarna produced hedge trimmers, weed whackers, lawnmowers, chainsaws, snow throwers, power cutters, and leaf blowers manufactured by Craftsman, Poulan, Poulan Pro, Weedeater, AYP, Jonsered, McCulloch, and RedMax.

This replacement piston kit is designed to be used with many different types of handheld lawn and garden equipment. The pistons are important parts of the engine. The crankshaft powers the pistons, so they move up and down within the cylinder. The purpose of the pistons is to transfer the gas that expands within the cylinder. The pistons can begin to wear out over time, which means that they could fail, which will cause serious problems for engine performance. If there are issues with the piston, a replacement piston kit is essential to get the machine back up and running. When a piston goes bad, it will cause the engine power to decrease. In some cases, the engine might lose all power. Replacement will require pliers, a set of wrenches, and a screwdriver to complete. This high-quality piston kit replacement is a genuine OEM part. It is sold individually. The part can be used for pole pruners, edgers, leaf blowers, string trimmers, and hedge trimmers. Compatible brands include Weed Eater, Poulan, Poulan Pro, Husqvarna, and Craftsman.

This bolt is a genuine OEM replacement part sourced directly from the manufacturer. It is designed for use with outdoor power equipment like lawnmowers and snowblowers. This bolt is a hex thread rolling bolt with the nut included. This type of bolt is designed to go into pre-drilled holes, such as on an engine. The hex threads on the bolt push the material through the hole, and the nut is then applied to secure the bolt. Bolts should be inspected as part of routine maintenance to ensure the nut is tightly secured and that the bolt has not rusted or come out. If a rusted bolt is discovered or a bolt is missing from the equipment, this replacement bolt can be used. Before replacing or installing a part on the equipment, allow it to cool and then remove the spark plug from the unit. Gloves should be worn when working with the unit. Install the new bolt and tighten the included nut. This bolt is a hex threaded, 3/8-16 x 1-1/8 bolt made of durable black metal and includes the nut. It is compatible with lawnmowers, snow blowers, trimmers, and lawn tractors manufactured by Husqvarna, Poulan, Weed Eater, Murray, and Craftsman.

This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.