Hunter July 15, 2024 for Model Number PFSS2MIYCSS Hi, my temperature control board in the refrigerator is out. The fridge workss fine, except the water dispenser shuts off after a few seconds of dispensing. That problem arose about the same time the display went black and became non-functional, so I assume they are related. Not sure what needs to be replaced; can't find an obvious part.
1 Answer Hello Hunter, thank you for contacting APP,If he unit is operating correctly other than the Temperature Control Board WR55X10684 and the water dispenser cutting off after a few seconds I would suspect that the Temperature Control Board has failed or an issue with the Main Control WR55X10996C. To check this I would disconnect the unit from power, access the Temperature Control, plug the unit back in and check DC Voltage at the J3 connector with a multimeter if you are comfortable doing so. J3 will have Black, Red, and Blue wires, and you will need to check Blue to Red wires which should have about 13VDC.If this voltage is present replace the Temperature Control Board, if not present replace the Main Control Board. Read More...
Pablo June 18, 2024 for Model Number LPUS2686LF0 Need a control panel and main board but want to make sure I'm looking at the correct ones.
1 Answer Hello Pablo, thank you for contacting APP,The Dispenser Control Board is 241973711 and the Switch-Membrane or Keypad is 242166910, the Main Power Control Board is 5304499076. Read More...
Thoersch June 17, 2023 for Model Number FGHC2342LF2 My wife washed the fridge, now no lights come on and nothing works. I replaced the main circuit board and it is still the same. Do I need to replace the control board also?
1 Answer Thoersch, This issue would most likely be caused by a faulty dispenser control board. Read More...
Dee June 18, 2022 for Model Number GFSS6KKYCSS My control dispenser does not work. Where can i get aa replacement part or one compatible
1 Answer Dee,Unfortunately, this part is no longer available and no satisfactory replacement has been provided by the manufacturer. Read More...
Jack July 13, 2021 for Model Number FFSC2323LECA What model is this (1, 2, 3, 4, or 5) ? My problem is the front panel acts like it is locked, I can't change temperature, won't beep when I depress buttons and I can't change from water to ice. The fridge is working fine, just can't change anything on the front panel, it does show the temp of the refrig and freezer. I did unplug it and plug back in after one minute - no joy. most likely the dispenser control board or the main control board or is there some other reset I can try first? THANKS!! Jack
1 Answer Jack, if the control lock is illuminated and will not change when the button is pressed and held, or if it is not on at all, the failure would most likely be in the display control 241973711 as there is no response at all. However, it would be recommended that the touchpad 242167025 ribbon harnesses are inspected for any indicators of a loose connection or damaged ribbon. Read More...
Tim June 15, 2021 for Model Number FGHB28441F5 Refrigerator not working, compressor won"t run, no fans working. Completely dead. Replaced inverter board same thing. Could the board on the front be bad? No codes ever came up. Is there something else to look for and check?
1 Answer Hello Tim, This is most like a failed main control board 242115239 if the model number is actually FGHB2844LF5. Read More...
Dmc May 23, 2021 for Model Number FPHS2687KF0 No lights are showing on control display but refrigerator is still running
1 Answer DMC, This issue would most likely be a faulty dispenser control board which will need to be replaced. Read More...
Julie June 06, 2020 for Model Number FGHS2631PF4A The control lock function will not unlock. Can not dispense ice or water. Tried holding it for 3 seconds and nothing. Tried unplugging it for 45 min and nothing when I plugged it back in. It’s like stuck in the locked mode. What part controls this. Also we lost power before it started malfunctioning.
1 Answer Julie, For this issue, the user interface 5304527931 would be the cause of the unit unlocking. Read More...
1 Answer Lena, Check to make sure that the control lock is not on and if it is not then the membrane switch 242167017 would be the most likely cause for this issue. Read More...
Lawanda April 04, 2020 Frigidaire Professionals Refrigerator (French doors) is cooling and freezing properly but the user control is shows 38 and 0. It will not allow me to change any settings. In addition to constantly beeping.
1 Answer LaWanda, With the display not responding you will want to check to make sure that the control lock is not on and if it is not then this would be a faulty dispenser control board. Read More...