Scott December 31, 2018 for Model Number PT956SR2SS This is a double oven. The top oven control panel and surrounding area gets hot and condensation accumulates in the control panel when cooking above 300. This just started happening. I replaced the door seal, same problem. I'm wondering if it's the cooling fan or some sensor causing that failed causing the cooling fan not to run? Any help would be appreciated. Thanks, Scott
1 Answer Scott, check the main control, J6-5 pin, grey wire, should send out 120 volts to the blower motors when the oven is turned on. If no voltage, you would need to replace the main control. Read More...
Ranny April 24, 2018 for Model Number PT916SM1SS The self cleaning cycle works for about 3 hr, then shuts off with error code F9. Have tried shutting off power but still not working the door is locked how can I test the cooling fan?
1 Answer Ranny, To test the cooling fan you would want to test at the control board for 120 vac. If there is 120 vac then check to see if the fan is getting 120 vac to it. If there is 120 vac at the fan then the fan is faulty. If there is not then check the limit switch to see if it has continuity at 150 degrees. This would be the most likely cause. Read More...
Sean Mclawhorn March 10, 2018 for Model Number GE Profile wall oven My oven was running for sometime, I saw a flash and heard a pop in between the microwave and oven. Microwave works fine including control panel. Oven light works, but nothing else, including control panel. Would a limit switch or thermal fuse flash when they blow? No evidence of wire shorts anywhere. Yes I flipped breaker/ unplugged. Nothing.
1 Answer Sean, A thermal fuse or limit switch will not flash when they blow and this issue sounds like it would have been the control board that is faulty. Read More...
Aaron November 20, 2017 for Model Number Jt965sok3ss Neither bake or broil are working on my wall oven. I reset the breaker but same deal. I think it probably needs a thermal switch please advise part number and location. Thanks
1 Answer Hello Aaron. Test the limit in the top of the unit and make sure it is good. If so, then the control WB27T10566 will need to be replaced if you have 240 coming to the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
1 Answer Hello John. You will need to raise the cooktop to access the thermostat DG47-00010B on the unit. Read More...
Amy October 26, 2015 for Model Number JTP20C0F3CC The self cleaning cycle works for about 20 mins, then shuts off with error code F9. Have tried shutting off power for the 30 seconds and more, still not working. Has always worked fine in past. Had oven for over 10 years. Still bakes and broils accurately. I have a bisque color oven also and the control panel has become quite discolored, is there a replacement for this also?
1 Answer Amy, This issue would most likely caused by a stalled cooling fan. You will want to check to make sure that the cooling fan is getting power to it. If it is not then check the thermal fuse for the fan to make sure that it is good. If there is power to the fan then the fan would need to be replaced. Read More...
Junior August 06, 2015 for Model Number JTP55DP2BB I'm having heating issues with my oven. When I try to bake the oven wont get hotter then 314 degrees and that's after letting it sit for like 2 hours. So far I have replaced Bake Element WB44T10110,Broil Unit WB44T10106,Hi-Limit Switch WB24T10081,Limit Switch Bake (tco) WB24T10175, and now I've just ordered Limit Switch WB24T10060. If this doesn't do it i don't know what else to do. FYI im a son trying to help a father out who loves to bake and i tested the elements prior to replacing for continuity and they were fine and was told replace them anyway...LOL
1 Answer Hello Junior. It sounds like the control WB27T11438 is bad and will need to be replaced on the unit if the voltage is good. Read More...
Brady November 15, 2014 for Model Number GE JK915SK4SS We were using our oven. After warming up and baking food, the oven completed shut down. All lights on the front & clock are dark. The inside light does not turn on. The touch pad is not responsive. I have tested both limit switches with a multi-meter and both test good. Is there another test I should do? Is the problem the computer?
1 Answer Brady, if the thermal fuse test ok you'll need to replace the board WB27T10606. Thanks. Read More...
Bob July 19, 2014 for Model Number JTP20BF3BB Both the bake and boiler elements will not work(heat}. Control panel works. Clock, oven light, keyboard control up an down heat. I press the bake button set to 400 and fan comes on but no heat just stays at 100. I do hear a click like it trying to raise the heat. So I tried the boiler and it would not heat. Thanks
1 Answer Hello Bob, The first thing to do is flip the breaker off then back on and re-try the unit. Since it is a 240Vac unit, 120Vac rides on the elements at all times. When the unit is turned on, the other 120Vac leg is connected to the circuit and 240Vac is applied. If one side of the breaker opens, the unit will not have to proper voltage to operate properly. If this is not the issue, you will either have a bad element WB44T10018 bake WB44T10043 broil, a bad limit switch WB24T10076 lower WB24T10060 upper, or a bad control WB27T10411. Read More...
Doug December 31, 2013 for Model Number JSP42SK5SS The oven is not cooking even. I adjusted the thermostat 25 degrees and it still seems to run 15 degrees hot. The user says that sometimes it works perfectly and others, it will cook the top of the food and not the bottom. Other times it will cook the bottom and not top. I am not familiar with this model of oven and was hoping you may have an idea as to what I can do to fix this. Thank you for your time. Doug S
1 Answer Hello Doug. If the calibration did not work, you will need to make sure the sensor WB23T10015 is good and if so, replace the control WB27T10416. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...