Range Heating Element

This boiler is the dishwasher water-heating assembly that provides the hot wash and rinse temperatures needed for effective cleaning. Replaces a failed boiler to restore normal heating during dishwasher cycles. What it does:

• Heats water used during wash and rinse cycles so detergent can clean effectively
• Helps maintain proper cycle temperatures for sanitizing performance
• Stops working when the element fails or the boiler leaks or overheats
• Often linked to no-heat cycles, prolonged wash times, or error codes related to water temperature

• Disconnect power and water supply before starting any repairs
• Inspect for leaks and damaged connectors; replace any worn mounting hardware or seals
• Handle electrical connections carefully and follow the appliance's service manual for wiring and testing

The grill heating element is a 230-volt, 1500-watt radiant coil or surface element that generates intense direct heat for grilling or broiling food in your range or cooktop. It glows red-hot to sear and brown food from above or below depending on its position. Replace this element if it no longer heats up, heats unevenly, has visible breaks or burn spots, or causes your circuit to trip when in use.

Oven not heating or baking unevenly? This 27-inch bake element restores proper bottom heat. Moderate DIY repair requiring electrical disconnect.

Fixes uneven baking and E34 error codes. This convection heating element restores proper heat circulation in your oven. Moderate DIY repair.

Large

Oven not heating or baking unevenly? This range bake element restores proper cooking temperatures. Moderately easy DIY repair in 30-45 minutes.

This surface heating element replaces a failed cooktop coil to restore even, reliable heating for electric ranges. Designed to match original fit and electrical connections for straightforward replacement. What it does:

• Heats cookware when the range control is turned on to provide consistent cooking temperatures.
• Commonly replaces elements that fail to heat, heat intermittently, or do not reach expected temperatures.
• Also used when an element shows visible damage, burning, or breaks at the coil or terminals.
• Works with the range's existing burner receptacle and infinite switch to deliver power to the cooktop.

• Disconnect power at the breaker or unplug the range before starting any repair.
• Allow the cooktop to cool completely to avoid burns; wear gloves to protect hands from sharp edges.
• Remove the old element by gently lifting and pulling it from the terminal block; align and seat the replacement terminals fully.
• Do not overtighten nearby fasteners; verify proper electrical connection and that the element sits flat in the cooktop before restoring power.

Oven not heating or baking unevenly? This bake element restores proper cooking temperatures. Moderate DIY difficulty with basic tools required.

Oven not heating or broiling unevenly? This broil element restores proper top heating in your electric range. Common fix for uneven browning.

Broil element provides the oven's upper heating for broiling and surface browning. Replacing a failed broil element restores broil performance so foods brown evenly and the oven properly completes broil cycles. What it does:

• Produces the high, direct heat used for broiling and top-surface browning.
• Restores heat in the oven's upper cavity when the broil setting is selected.
• Common fix when food doesn't brown, the element doesn't glow, or the broil cycle delivers little heat.
• Works with the oven's broil control and thermostat to achieve required broiling temperatures.

• Disconnect power to the appliance at the breaker before starting any repair.
• Remove oven racks and access the element mounting screws or rear terminal cover as required by your model.
• Handle the element carefully and avoid touching terminals; ensure connections are tight and insulated.
• Replace damaged mounting hardware or connectors before re-energizing the oven.

Oven not heating during bake cycle? This lower bake element restores consistent heating for normal baking and roasting in your electric range.

This broil shield is the oven's rear cavity panel that protects the oven back and nearby components from direct broiler heat. It helps channel heat for safer broiling and prevents heat damage to internal parts. What it does:

• Deflects direct broiler heat away from the oven back wall and components
• Helps maintain proper broiling performance by directing heat toward food
• Reduces risk of heat-related damage, discoloration, or premature wear on internal oven parts
• Limits grease and debris contact with sensitive rear components

• Disconnect power (and gas supply on gas ovens) before servicing the oven
• Remove oven racks and, if required, the broil element to access the shield
• Handle edges carefully—metal parts can be sharp
• Keep hardware removed during disassembly; screw locations for reassembly

This surface cooktop element provides the heating source for electric ranges and replaces a damaged or non-working burner to restore normal cooking heat. Designed to match OEM fit and function for compatible Whirlpool ranges. What it does:

• Heats cookware for stovetop cooking when the burner control is turned on
• Replaces a burned-out or broken surface element that no longer heats
• Can resolve symptoms like no heat from the burner, intermittent heating, or visible damage to the element
• Restores even heating when the original element has hot spots or partial failure

• Disconnect power at the breaker or unplug the range before servicing to avoid shock
• Allow the element and cooktop to cool completely before removing or installing
• Remove the old element by unplugging the connector or detaching mounting hardware, then connect the new element securely

Oven not heating or baking unevenly? This range bake element restores proper heating. Common DIY repair that takes about 30 minutes with basic tools.

Oven not heating or baking unevenly? This bake heating element restores proper temperature for cooking and browning. Moderate DIY repair.