Range Burner & Related Parts

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Replaces a cracked, chipped, or missing burner cap on your gas range cooktop. Sits atop the burner to evenly distribute heat across the cooking surface.

Holds and positions the burner orifice above the surface burner on gas ranges. Replace if cracked, broken, or damaged to restore proper burner alignment.

Surface burner cap sits over the burner head to shape the flame. Replace if cracked, chipped, or worn to restore even heating and proper flame distribution.

Converts your gas range between natural gas and LP propane fuel sources. Includes orifices and components needed for safe fuel type conversion.

Converts your gas range to use liquid propane instead of natural gas. Includes orifices, fittings, and hardware for safe fuel conversion.

Controls gas flow to your range burner for proper flame size. Replace if orifice is worn, clogged, or damaged to restore accurate gas metering.

Surface burner head for gas ranges. Sits above the gas burner to distribute flame evenly. Replace if cracked, warped, or clogged from repeated use.

The Surface Burner Head is an OEM replacement part for Whirlpool ranges. This surface burner head sits above the gas burner below and allows for even heating of pots and pans placed on top of it. 

Over time, burner heads can become warped or cracked due to repeated heating and cooling. Thin burners can also wear down more quickly from scrubbing or friction during cleaning.

Symptoms of a bad surface burner head include:

• Uneven or inefficient heating from the burner surface
• Visible warping, cracks or damage to the burner surface 
• Burners that are difficult to clean leaving residue 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

This orifice spud positions the burner orifice for proper gas flow to the burner, helping restore consistent ignition and steady flame performance in gas ranges and ovens. It replaces a worn or damaged spud to help maintain safe burner operation. What it does:

• Secures the burner orifice in the burner tube so gas is delivered correctly to the burner
• Restores consistent flame shape and size when a damaged spud is causing uneven or weak flames
• Helps resolve ignition issues tied to a misaligned or broken orifice spud
• Works with the existing burner assembly and orifice insert to control gas flow

• Turn off the gas supply and electricity to the appliance before starting work
• Use basic hand tools; avoid overtightening fittings to prevent damage
• Check all connections for leaks after installation using a soap solution or approved leak detector

This burner cap replaces a damaged or missing cap on a sealed gas cooktop burner to help protect the burner head and shape the flame for even cooking. Fits the corresponding factory burner head and restores normal flame pattern. What it does:

• Sits on the sealed burner head to direct and stabilize the gas flame
• Protects the burner head from spills and debris that can affect operation
• Helps restore even heating when a cracked, warped, or missing cap causes poor flame shape
• Works with the factory burner assembly to maintain safe burner performance

• One burner cap

• Ensure the range is OFF and the surface and burner are cool before installing
• Lift off the old cap and seat the replacement flat on the burner head; no tools typically required
• Inspect burner ports for clogs and clean gently if needed before installing the new cap

5-piece LP conversion orifice kit for gas range surface burners. Converts your range from natural gas to liquid propane fuel. Replace when switching fuel types.

Saddle-style gas valve for ranges. Controls gas flow to burners. Replace if cracked, leaking, or unable to regulate gas supply to your cooktop.

This bake burner is the oven's gas combustion component that produces the heat for baking and roasting. It restores reliable oven heating so you can cook and bake at the proper temperatures. What it does

• Provides the primary gas flame for the oven's bake function.
• Helps the oven reach and maintain baking temperatures.
• Resolves symptoms like no oven heat, weak or erratic bake flame, or oven not maintaining temperature.
• Works with the oven's ignition system and safety controls to light and sustain the burner.

• One bake burner assembly.

• Turn off gas supply and power to the appliance before beginning any work.
• Inspect ignition and burner ports for debris; clean or replace as needed for proper lighting.
• Follow the oven manufacturer's service instructions and local codes when reconnecting gas lines.

Controls gas flow to your range burner for proper flame size. Replace if cracked, clogged, or missing to restore precise gas metering and safe operation.