Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Burner & Related Parts

Best Seller
Dryer Gas Valve Coil Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279834

The Dryer Gas Valve Coil Kit is an OEM replacement part for Whirlpool dryers, as well as Kenmore and Samsung dryers. It is a set of coils that control the flow of gas fuel to the burner. The gas valve regulates the precise amount of gas needed to properly combust and generate heat for drying clothes. 

Causes of a bad gas valve coil can be wear and tear from regular use, lime or mineral buildup on the coils over time, or physical damage to the coils.

Symptoms of a bad gas valve coil kit include:

  • Inconsistent or incomplete drying  
  • Slow or intermittent drying
  • Burning smell from the gas dryer
  • Improper burner ignition or non-ignition

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Timer will not advance
  • No heat or not enough heat
  • Shuts off too soon
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Flame to dry clothes would go out after about a minute and wouldn't reignite   Wendell M. • Brown Deer , WI • June 19, 2014

I'm starting with a quick background on my dryer. About 18 months ago the belt on the dryer started slipping and squealing. I had a can of belt dressing spray so I popped the top open and sprayed the belt. It actually worked for about a year before it started squealing again. For the next 6 months I had to spray it more and more often. Then the clothes stopped drying. Obviously, at this point, I had to get off my lazy ass and fix the dryer. Searched my dryer's model number on the internet and... Read more

More
$27.21
Compare At:
$32.11
You Save:
$4.90

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Burner Cap Assembly
Genuine Ge part
By: Ge
Part Number: WB28K10222

The Burner Cap Assembly is an OEM part for GE cooktops and ranges. It is designed to cover the burner head, ensuring even flame distribution for efficient and effective cooking. The cap also protects the burner head from spills and debris, which can interfere with burner performance and cause clogs.

You should replace the burner cap assembly if it becomes damaged or worn out. Causes of a bad burner cap assembly can include regular exposure to high heat, food residue buildup, or accidental impacts that cause cracks or warping. A compromised burner cap can lead to uneven flames and inefficient cooking.

Symptoms of a bad burner cap assembly include:

  • Uneven or yellow flames
  • Difficulty igniting the burner
  • Visible cracks, chips, or warping in the burner cap
  • Poor cooking performance with hotspots on cookware

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You My mom's burner caps were cracked   Marlena H. • Chicago , IL • October 27, 2015

I ORDERED NEW CAPS AND PUT THEM ON. Read more

More
$28.95
Compare At:
$34.45
You Save:
$5.50

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Burner Cap (Med)
Genuine Ge part
By: Ge
Part Number: WB29K10023

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the gas burner to help distribute the flame evenly for better cooking performance. This cap is crucial for achieving precise temperature control and consistent heating, ensuring that food cooks evenly across the cookware.

Symptoms of a bad Burner Cap Assembly include:

  • Uneven flame distribution, leading to uneven cooking or heating.
  • Difficulty igniting the burner, or the flame going out unexpectedly.
  • Visible signs of wear, such as warping, discoloration, or chipping of the burner cap.

Causes of a bad burner cap can include accumulation of food particles or cleaning products that clog the ports, physical damage from impact or dropping, or general deterioration from regular exposure to high temperatures.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Largest burner taking too long to light up on my ge model jgp933sek1ss   Gary D. • Louisville , KY • February 23, 2015

Replacing head burner d solved the problem. The 8 year old original developed a mild warp, replacing it was the solution. GE gas cook top Model JGP933SEK1SS. I replaced the other burner caps for a cosmetic renewal. Read more

More
$19.51
Compare At:
$23.41
You Save:
$3.90

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Gas Valve Coil Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303931775

The Dryer Gas Valve Coil Kit is an OEM part for Frigidaire dryers. This kit includes solenoid coils necessary for the opening and closing of the gas valve during the drying cycle. These coils are vital for controlling the flow of gas into the burner, enabling the ignition and maintaining the flame required to dry clothes effectively. 

Symptoms of a bad Dryer Gas Valve Coil Kit include:

  • No heat or insufficient heat in the dryer.
  • The dryer stops heating partway through the cycle.
  • A "clicking" noise when the dryer attempts to ignite the gas flame but fails.
  • Gas smell from the dryer, indicating incomplete combustion.

Causes of a bad coil kit can include electrical failure within the coils, mechanical wear from repeated use, or overheating that damages the coil's integrity.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Our dryer didn't heat   Larry L. • Poway , CA • November 10, 2014

Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more

More
$23.95
Compare At:
$34.51
You Save:
$10.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Burner Cap (Lg)
Genuine Ge part
By: Ge
Part Number: WB29K10024

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the burner head and serves to distribute the flame evenly across the surface, enhancing cooking efficiency and consistency.

Symptoms of a faulty burner cap assembly include:

  • Uneven flame distribution or a yellow or orange flame.
  • Difficulty igniting the burner.
  • Excessive soot or unburned gas smell, indicating incomplete combustion.

The common causes of issues with the burner cap assembly include misalignment, food spillage clogging the ports, or wear and tear from regular use. These can affect the flow of gas and air, leading to inefficient combustion and poor cooking performance.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Largest burner taking too long to light up on my ge model jgp933sek1ss   Gary D. • Louisville , KY • February 23, 2015

Replacing head burner d solved the problem. The 8 year old original developed a mild warp, replacing it was the solution. GE gas cook top Model JGP933SEK1SS. I replaced the other burner caps for a cosmetic renewal. Read more

More
$18.70
Compare At:
$22.25
You Save:
$3.55

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Lp Conversion Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: GRLP4

The LP Conversion Kit is an OEM part for Frigidaire gas ranges. This kit allows for the conversion of the range's fuel type from natural gas to LP (liquefied petroleum) gas. It ensures the safe and efficient operation of the gas range when using LP gas as the fuel source.

Causes of a bad LP conversion kit can include incorrect installation, missing components, or damaged parts.

Symptoms of an improper fuel conversion or a bad LP conversion kit may include:

  • Uneven flame
  • Improper heating
  • Unusual gas smells

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Natural gas to propane conversion on kitchen stove   Ronald C. • Cumberland Foreside , ME • June 12, 2014

Finding the proper conversion kit was a snap. I just plugged in the model number and Appliance Parts Pros sent the proper conversion kit. Read more

More
$55.24
Compare At:
$65.18
You Save:
$9.94

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Burner Cap
Genuine Ge part
By: Ge
Part Number: WB29K10022

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It is designed to sit atop the burner base, helping to distribute the flame evenly across the cooking surface. The cap also serves to protect the burner head from spills and debris, which can clog the gas outlets.

Symptoms of a bad Burner Cap Assembly include:

  • Uneven flame distribution, which can cause uneven cooking or take longer to heat food.
  • Difficulty lighting the burner, or the flame going out unexpectedly.
  • Visible signs of wear like chipping, warping, or discoloration.

Causes of a bad burner cap can include accumulation of spilled foods or cleaning chemicals, which might block the gas flow, and normal wear and tear from high-temperature exposure that can alter the shape or integrity of the cap.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Largest burner taking too long to light up on my ge model jgp933sek1ss   Gary D. • Louisville , KY • February 23, 2015

Replacing head burner d solved the problem. The 8 year old original developed a mild warp, replacing it was the solution. GE gas cook top Model JGP933SEK1SS. I replaced the other burner caps for a cosmetic renewal. Read more

More
$11.78
Compare At:
$14.02
You Save:
$2.24

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dual Coil
Genuine Ge part
By: Ge
Part Number: WE4X692

The Dual Coil is an OEM part for GE dryers. This is often referred to as the “M” coil. If you need to replace both the main coil and dual coil, it is recommended to order the kit 279834, which includes both coils for a comprehensive replacement.

Causes of a faulty dual coil can include wear and tear over time, electrical component failure, or damage due to overheating or excessive usage. These factors can result in insufficient heat production, inconsistent drying, or no heat at all.

Symptoms of a bad dual coil may include:

  • Insufficient heat or no heat during the drying cycle
  • Inconsistent drying results
  • Extended drying times

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Do-It-Yourself Stories from Customers like You Gas dryer would run but no heat   Roger M. • Fabius , NY • September 03, 2016

I checked out a few youtube videos on trouble shooting a gas dryer that would not heat, like this one https://www.youtube.com/watch?v=Q8j6fQM3P34. Eliminated all the sensors as possible problems, leaving only the coils or more advanced problems. Took the chance it was one of the coils. I ordered both, replaced them both, put the dryer back together and fortunately that was the problem and it lit up and is running as good as new. Read more

More
$33.95
Compare At:
$40.06
You Save:
$6.11

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Burner Base
Genuine Ge part
By: Ge
Part Number: WB16T10046

The Burner Base is an OEM part for GE ranges and cooktops, designed to securely hold the burner and distribute gas evenly for cooking. This part serves as the foundation for the gas burner, ensuring a stable and consistent flame that can be adjusted for precise cooking temperatures. 

Causes of a bad Burner Base can include corrosion, clogging from spilled foods or liquids, and general wear and tear over time. A damaged or deteriorated burner base can affect the flame's quality, leading to uneven cooking or, in some cases, posing a safety hazard.

Symptoms of a bad Burner Base include:

  • Uneven flame or poor heat distribution
  • Difficulty igniting the burner
  • A yellow or orange flame instead of blue
  • Gas leakage smell when the burner is on

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The cooktop left two switches not activating module (no ticking) intermittent back/ front burner not lighting.   Erik E. • Upland , CA • November 30, 2022

Cleaned/ soaked all burners in Ammonia and scraped off the remaining with a pumice stone. Oiled all screws. Replaced (4) ignitors or electrodes and module kit/ right front burner/ burner switch harness. Although this was the third order of switches from 3 different places including the local supplier due to the switches being manufactured upside down and lit on low on the first attempt. (Since I was going to have to open it up again to either repair or remove and return the upside-down harness... Read more

More
$33.95
Compare At:
$40.40
You Save:
$6.45

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Surface Burner Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508441

The Surface Burner Cap is an OEM part for Frigidaire gas ranges. It sits atop the surface burner and helps to distribute the gas flame evenly for consistent cooking performance. The cap also protects the burner head from spills and debris.

You should replace this surface burner cap if it becomes damaged or worn out. Signs of damage include chipping, cracking, or discoloration due to prolonged exposure to high temperatures or cleaning agents.

Symptoms of a bad surface burner cap include:

  • Uneven or unstable flame
  • Difficulty in igniting the burner
  • Visible cracks or chips on the cap
  • Food cooking unevenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Missing burner caps and grates   Riley H. • Reno , NV • September 05, 2016

Ordered replacement parts Read more

More
$37.95
Compare At:
$45.16
You Save:
$7.21

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Burner
Genuine Ge part
By: Ge
Part Number: WB16X24722

The Range Burner is an OEM replacement part for GE ranges. It is responsible for safely producing gas flames to heat the range surface. Whether baking, broiling, or simmering, the range burner must provide precise flame control and heat distribution.

Causes of a bad range burner can include cracked or rusted burner heads that improperly direct the flame, clogged or restricted gas ports that disrupt fuel flow or wear to ignition components that affect lighting.

Symptoms of a bad range burner include:

  • Irregular or uneven heating of the range surface
  • Difficulty controlling burner flame heights
  • Burners that will not light or stay lit
  • Singed, scorched, or burnt foods
  • Gas leaks around burners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Burner & cap   Raymond R. • Kingman , AZ • December 19, 2021

Needed replacement , the original was detroyed . Read more

More
$37.95
Compare At:
$45.16
You Save:
$7.21

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Medium Surface Burner
Genuine Ge part
By: Ge
Part Number: WB16K10055

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

  • Inconsistent flame size or failure to ignite
  • Uneven heating or hot spots on the cookware
  • Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Needed to replace ordered parts   Craig J. • Liverpool , NY • July 24, 2015

Took off old, replaced with new. Cross reference worked well, all GE parts. Saved a lot of money compared to local supplier. Read more

More
$45.95
Compare At:
$55.14
You Save:
$9.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Main Coil
Genuine Ge part
By: Ge
Part Number: WE4X693

The Main Coil is an OEM part for GE dryers. It is a crucial component of the gas valve assembly, responsible for opening the gas valve to allow gas flow to the burner, enabling the dryer to produce heat.

Causes of a bad main coil can include electrical faults such as short circuits or open circuits within the coil, wear and tear from prolonged use, or damage due to overheating. Over time, the coil's ability to control the gas flow can diminish, affecting the dryer's performance.

Symptoms of a bad main coil include:

  • The dryer not heating up
  • Intermittent heating during a drying cycle
  • The dryer taking longer than usual to dry clothes
  • A clicking sound without the ignition of the burner

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Gas dryer would run but no heat   Roger M. • Fabius , NY • September 03, 2016

I checked out a few youtube videos on trouble shooting a gas dryer that would not heat, like this one https://www.youtube.com/watch?v=Q8j6fQM3P34. Eliminated all the sensors as possible problems, leaving only the coils or more advanced problems. Took the chance it was one of the coils. I ordered both, replaced them both, put the dryer back together and fortunately that was the problem and it lit up and is running as good as new. Read more

More
$26.32
Compare At:
$33.09
You Save:
$6.77

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Burner Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508442

The Burner Cap is an OEM part for Frigidaire cooktops and ranges. It is designed to cover the burner head, ensuring an even distribution of the flame for efficient cooking. The burner cap also protects the burner head from spills and debris, which can affect performance.

You should replace the burner cap if it becomes damaged or worn out. Causes of a bad burner cap can include exposure to high heat, buildup of food residue, or accidental impacts. A compromised burner cap can lead to uneven flames, inefficient cooking, or difficulty in lighting the burner.

Symptoms of a bad burner cap include:

  • Uneven or yellow flames
  • Difficulty in igniting the burner
  • The burner cap being cracked, chipped, or discolored
  • Poor cooking performance or hotspots on cookware

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Missing burner caps and grates   Riley H. • Reno , NV • September 05, 2016

Ordered replacement parts Read more

More
$33.95
Compare At:
$40.06
You Save:
$6.11

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Valve Lf/Lr/Center
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10206288

The Valve is an OEM part for Whirlpool gas ranges. It plays an important safety role in controlling the flow of gas fuel to the range's burners.

Causes of a bad gas valve can include wear and tear over extended use, mineral deposits clogging the valve's small passages, or physical damage affecting its precision-controlled mechanisms.

Symptoms of a faulty gas valve include:

  • Burners that will not light or that light unpredictably
  • Inability to adjust burner flames properly
  • Gas odors detecting around the range

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas models. 

Do-It-Yourself Stories from Customers like You 3 burner knobs would not turn frozen   Jackie S. • Springfield , IL • July 01, 2016

Ordered correct replacement parts (your online form helped to identify correct valves 2 had black dot on inside stem for back small burner 1 had red dot for larger front burner). locked stove, turned off gas, unplugged cord. removed knobs, 5 screws and front plate also removed L shaped plate below knobs for better access to comp. fittings. pulled off ignitior controls loosened compression fittings (hard to get wrench on nut but doable), removed screw holding valve to manifold. reversed order... Read more

More
$77.95
Compare At:
$93.54
You Save:
$15.59

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Conversion Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: GRLP3

The LP Conversion Kit is an OEM part for Frigidaire gas appliances. This kit includes all necessary parts to convert a gas appliance from natural gas to liquid propane (LP), ensuring proper and safe operation with the desired fuel type.

Over time, or when changing fuel sources, a conversion kit is essential. Causes for needing a conversion kit include moving to a location with a different gas supply, upgrading the appliance, or ensuring compatibility with available fuel types. Using the wrong type of gas without conversion can lead to inefficient performance or safety hazards.

Symptoms indicating the need for a conversion kit include:

  • Poor burner performance
  • Yellow or inconsistent flames
  • Difficulty igniting burners
  • Incorrect appliance function for the current gas type

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You We needed to convert a natural gas stove to propane   Joanne and Greg A. • Escanaba , MI • October 06, 2014

We ordered the parts we needed, and received it with-in a week. My husband was able to covert the stove in one evening. Read more

More
$51.30
Compare At:
$61.05
You Save:
$9.75

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Burner & related replacement parts are essential for keeping your cooking appliances in top-notch condition. Imagine the comfort and ease they bring to your daily life, allowing you to whip up family meals without a hitch. These parts play a crucial role in maintaining the efficiency and safety of your stoves and ovens.

Your burner & related parts ensure that your appliance works smoothly, providing consistent heat and reliable performance. From igniters to burner caps, each component has a significant impact on the overall functionality. Investing in OEM replacement parts guarantees you're getting high-quality, compatible parts designed specifically for your appliance. This means a seamless fit and long-lasting durability.

When it comes to these replacement parts, availability is never an issue. You can easily find the exact parts you need to keep your appliance running efficiently. Reliable burner & related parts are essential for ensuring you can continue creating delicious meals for your family without any unexpected interruptions. So, whether you're replacing a worn-out burner or simply stocking up on essentials, rest easy knowing high-quality parts are just a click away.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store