Range / Cooktop / Oven Gas Conv Kit Parts

This assembly combines the spark ignitor that lights the gas burner with the orifice that controls gas flow to create the flame pattern. Located beneath each surface burner on gas ranges, replacement is needed if the burner won't light, has weak ignition, or produces an irregular flame pattern.

This ignitor orifice assembly delivers and meters gas to the oven/range ignitor so burners light reliably. Replace a damaged or clogged assembly to restore consistent ignition and proper burner lighting on compatible gas appliances. What it does:

• Routes and meters gas flow to the ignitor so the burner can light
• Supports consistent ignition timing for oven and range burners
• Commonly used when an oven won't light, has weak or uneven flames, or ignition failures occur
• Helps prevent gas leaks by providing a secure connection when installed correctly

• Disconnect power and shut off the gas supply before starting any work
• Only install on compatible appliances; follow the OEM instructions
• Hand-tighten connections and check for leaks with a soapy-water solution after restoring gas

LP conversion kit for gas ranges and cooktops. Converts natural gas appliances to liquid propane. Includes orifices and hardware for burner conversion.

LP orifice spud directs propane gas flow to the burner on gas cooktops and ranges. Replace if cracked, worn, or missing to restore proper gas metering.

Gas cooktop orifice kit for converting between natural gas and LP propane. Includes color-coded orifices for burners. Replace when switching fuel types.

Three-piece orifice spud kit for converting range burners between natural gas and propane. Replaces worn or incorrect spuds during fuel-type conversion.

Gas orifice spud that meters fuel flow from valve to burner on gas ranges. Replace if clogged, damaged, or converting between LP and natural gas fuel types.

This ignitor orifice assembly replaces the burner gas orifice and ignitor used to light a gas cooktop or range. It restores reliable spark ignition and corrects flame delivery for safer, more consistent burner operation. What it does:

• Provides the ignitor electrode and matched gas orifice to initiate and shape the burner flame
• Helps stop intermittent or no-light conditions caused by a faulty ignitor or clogged orifice
• Can improve weak or uneven flames when the orifice is damaged or misaligned
• Works as a direct replacement assembly for the specified burner configuration

• One ignitor orifice assembly (electrode and orifice preassembled)

• Turn off gas supply and disconnect power before starting any repair
• Use proper tools to remove the burner cap and access the assembly; handle the ignitor electrode carefully to avoid damage
• Verify correct alignment and secure the assembly per manufacturer torque recommendations; test for proper ignition and gas leaks after installation

Replacement gas orifice spud for range burners. Meters gas flow to maintain proper flame height. Install when original is clogged, damaged, or worn.

Burner orifice spud for cooktop or range. Installs in burner assembly to regulate gas flow. Replace if damaged, worn, or converting between fuel types.

Supplies and meters gas to the burner while positioning the ignitor. Replace if assembly is damaged, cracked, or gas flow is obstructed or misaligned.

Directs gas flow into the burner for proper ignition and flame control. Replace if cracked, clogged, or damaged to restore consistent gas flow.

Replace a worn, damaged, or missing burner orifice spud on your cooktop. This small threaded fitting controls gas flow to the burner for proper operation.

The gas range surface burner igniter orifice assembly is a combined component that includes both the igniter electrode and the orifice fitting that meters gas flow to a specific surface burner. Together, these parts control how gas is delivered and ignited at the burner head. Replace this assembly if a burner won't light, the flame is weak or uneven, gas flow to one burner seems restricted, or the igniter electrode is visibly damaged.

This is the center surface burner orifice holder and tube assembly for a gas range. It directs gas flow from the valve to the burner head and meters the correct amount of fuel for proper flame output. Replace this assembly if the center burner produces an uneven flame, won't ignite consistently, or if the orifice is clogged or damaged.

This kit contains the orifices, springs, and hardware needed to convert a natural gas range to operate on liquid propane (LP) gas. It includes all the components required for a safe and complete fuel conversion. Use this kit if you are switching your range's fuel source from natural gas to LP, such as when moving to a location without a natural gas supply.