Range Gas Conv Kit Parts

Pilot assembly for gas ranges that provides the standing flame to ignite the main oven burner. Replace if your pilot flame is out, weak, or extinguished.

Burner orifice spud for gas range conversion between natural gas and LP. Replace broken, missing, or incorrect size orifices when converting fuel type.

LP gas orifice for gas range burners. Replace this brass fitting if cracked, clogged, or when converting fuel type. Ensures proper gas flow rate.

Gas burner orifice jets meter fuel flow to range and oven burners. Replace when damaged, worn, or missing to restore proper flame size and heat control.

Converts your gas range between natural gas and LP propane fuel types. Includes orifices and components for safe fuel changeover. Order when switching gas.

Precision gas fitting that meters fuel flow to a single burner. Replace if cracked, clogged, or incorrectly sized for your fuel type or BTU rating.

Orifice spud for gas range burners. Threads into the manifold to regulate gas flow. Replace if cracked, stripped, or missing during fuel conversion.

Burner orifice spud for gas ranges. Installs on burner assembly to control gas flow. Replace if cracked, damaged, or when converting between LP and natural gas.

Orifice hood directs natural gas flow from the orifice to the burner. Replace if cracked, damaged, or missing to restore proper gas delivery and flame.

Burner orifice spud for gas ranges. Installs in burner assembly to regulate gas flow. Replace if damaged, worn, or when converting between natural gas and LP.

Orifice tube connects gas supply to burners on your range. Replace if cracked, damaged, or leaking to restore proper gas flow and safe operation.

Main venturi front for gas range burners. Installs between the gas valve and burner to direct gas flow. Replace if cracked, damaged, or corroded.

Converts your gas range from natural gas to liquid propane fuel. Includes all orifices and instructions. Needed when switching fuel types or missing parts.

The LP Conversion Kit is an OEM part for GE ranges. This kit allows the range to run on either liquid propane (LP) gas or natural gas and includes all necessary components for conversion.   

The LP Conversion Kit contains burner tubes, valves, and seals to adapt the range safely to run on liquid propane. Installation involves replacing components and adjusting gas pressure and burner flames accordingly.

Causes of a bad conversion can include worn burner tubes, seals, or valves that no longer properly regulate gas flow. 

Symptoms of an improperly converted or failing kit include:

• Incomplete ignition of burners   
• Unstable burner flames
• Gas leaks around valves or tubes
• Abnormal sounds or smells from the gas system

Replacing with this genuine OEM GE part ensures safe, reliable operation whether using natural gas or liquid propane. This conversion kit is also compatible with some Hotpoint, KitchenAid, and Kenmore ranges.
 

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.