Range Heating Element

This oven bake element heats the bottom of the oven cavity to bake and roast foods evenly. Replacing a damaged element restores proper oven heating so your range can reach and hold cooking temperatures. What it does:

• Heats the oven cavity from the bottom to brown and cook foods
• Common fix for ovens that won't heat or take too long to reach temperature
• Replaces elements that are visibly broken, burned through, or no longer glowing
• Helps eliminate uneven baking or cold spots caused by a failed element

• One bake element

• Disconnect power to the appliance at the breaker or unplug before starting any repair
• Handle element carefully; sharp edges and ceramic insulators can break
• Verify terminal connections are secure and avoid touching terminals while energized

This surface heating element replaces a damaged or nonworking stovetop burner to restore even heat for cooking. It fits most compatible electric ranges and gives you a direct replacement for a faulty top burner element. What it does

• Provides the heating element that transfers heat to cookware on the cooktop
• Restores proper burner heat when an element no longer warms or cycles correctly
• Helps eliminate uneven cooking or intermittent on/off heating from a failed element
• Works as a direct replacement for the corresponding top/burner element on compatible ranges

• Disconnect power to the range before removing or installing the element to avoid electrical shock
• Pull the element straight out of the terminal block; avoid bending terminals or damaging the receptacle
• Inspect the burner receptacle for damage and replace if corroded or loose
• After installation, test the element on low and high settings and watch for proper operation

The Element is an OEM component specifically designed for Frigidaire brand electric ranges. Located beneath the cooktop surface, these resistive elements generate heat for cooking.

Prolonged use causes elements to warp, crack, or lose continuity over time due to normal heating/cooling cycles. Element failure limits cooktop functionality.

Causes of a faulty element relate to typical wear expected of high-temperature filament windings. Accidental damage during cleaning can also impact integrity.

Symptoms of a bad element involve:

• One or more cooktop zones not heating properly or at all  
• Burned residue indicating heating dysfunction
• Visible cracks or separations in the resistive coils

Replacing with this OEM Frigidaire assembly restores reliable and consistent zoned heating. Compatibility extends to some Kenmore, Gibson, and Electrolux ranges.

This radiant cooktop element replaces a failed dual-size burner to restore proper heating on compatible glass-ceramic ranges. It provides the inner and outer cooking zones in one dual-ring element for flexible cookware sizing. What it does:

• Heats cookware using the inner or outer cooking ring for small or large pots and pans
• Restores normal cooking when a burner won't heat or heats only on one ring
• Replaces cracked, visibly damaged, or non-responsive radiant elements
• Helps eliminate uneven heating or intermittent power to the cooktop zone

• One radiant cooktop element (dual-size 230/140 mm)

• Disconnect power at the breaker before servicing the cooktop to avoid shock
• Handle the glass-ceramic surface and element carefully to prevent cracking
• After installation, test the burner on low and high settings to confirm operation

This bake element is the oven heating element that produces the lower radiant heat used for baking and roasting, restoring even oven temperatures and consistent cooking results. What it does:

• Heats the oven cavity during bake cycles to cook food evenly
• Replaces a broken or visibly damaged element that won't glow or heats weakly
• Helps correct symptoms like no heat on bake, uneven baking, or error codes tied to heating failures
• Works as the direct replacement heating element assembly in compatible ranges and wall ovens

• One bake element

• Disconnect power to the appliance before starting any repair
• Allow the oven to cool completely and wear gloves to avoid cuts from sharp edges
• Access typically requires removing the oven cavity or rear access panel and disconnecting two terminal connectors
• Verify correct fit and secure electrical connections;

This 230V, 1500W radiant cooktop element replaces a damaged or non-working surface burner to restore even heating for compatible electric glass-ceramic ranges. Durable design for direct terminal connections on most Bosch-style cooktops. What it does:

• Heats cookware through direct radiant energy for stovetop cooking
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps eliminate uneven cooking or zones that won't reach set temperatures
• Matches OEM electrical rating for safe, consistent performance

• One radiant element (230V, 1500W)

• Disconnect power at the breaker before inspecting or replacing the element
• Allow the cooktop to fully cool; element and glass surface can retain heat
• Verify terminal connections and secure mounting per range instructions

Large

This oven bake element replaces the bottom heating element that provides consistent heat for baking and roasting. It restores proper oven temperature so food cooks evenly and helps resolve heating issues. What it does

• Heats the oven cavity during bake cycles to maintain set temperatures
• Restores even baking and roasting when the oven underheats or cooks unevenly
• Can resolve symptoms such as no heat during bake, long preheat times, or inconsistent oven temperatures
• Connects to existing terminal studs and mounts at the rear of the oven cavity

• Disconnect power at the circuit breaker before starting any repair
• Allow the oven to fully cool and remove racks before accessing the element
• Replace using appropriate tools; ensure terminals are tight and insulated to prevent shorting

This surface heating element replaces a failed cooktop coil to restore even, reliable heating for electric ranges. Designed to match original fit and electrical connections for straightforward replacement. What it does:

• Heats cookware when the range control is turned on to provide consistent cooking temperatures.
• Commonly replaces elements that fail to heat, heat intermittently, or do not reach expected temperatures.
• Also used when an element shows visible damage, burning, or breaks at the coil or terminals.
• Works with the range's existing burner receptacle and infinite switch to deliver power to the cooktop.

• Disconnect power at the breaker or unplug the range before starting any repair.
• Allow the cooktop to cool completely to avoid burns; wear gloves to protect hands from sharp edges.
• Remove the old element by gently lifting and pulling it from the terminal block; align and seat the replacement terminals fully.
• Do not overtighten nearby fasteners; verify proper electrical connection and that the element sits flat in the cooktop before restoring power.

This is a range element assembly that's used in select electric ranges. It creates an electromagnetic field to help transfer energy to heat the food. Another name for this piece is an induction coil. If it is not working properly, it could prevent the burner from heating, rendering it useless.Although the range element can last for a long time, it will start to wear out and will break with extended use. Like other parts on the range, it could be damaged if the stove is moved and dropped.Unplug the range before replacing it.This range element assembly fits certain models from Frigidaire, Electrolux, and Kenmore. This piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.