Refrigerator Auger, Helix, Crusher

Ice jamming or spilling from cracked bin? This ice bin assembly stores and dispenses cubes smoothly. Easy slide-in installation restores function.

This ice deflector guides ice cubes from the icemaker into the ice bin to help keep ice delivery consistent and reduce cube jams or spills. It's a simple replacement that restores proper ice routing in compatible refrigerators. What it does:

• Directs ice cubes from the icemaker into the ice bin for orderly dispensing
• Helps prevent ice clumping and blockages that can stop ice flow
• Keeps ice moving away from the icemaker assembly and into the bin
• Restores proper alignment and function after a cracked or missing deflector

• Disconnect power to the refrigerator before servicing to avoid electrical or mechanical injury
• Remove the ice bin or access panel per your model's service instructions to reach the deflector
• Part typically snaps or slides into place; reuse existing fasteners unless new hardware is supplied
• After installation, reconnect power and run the icemaker through a cycle; discard any ice made during the repair if contamination is suspected

Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:

• Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
• Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
• Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
• A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.

• Disconnect power to the appliance before starting any repair to avoid electrical shock.
• Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
• Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
• After installation, restore power and run a test harvest cycle to ensure proper cube ejection.

Ice dispenser not working or auger keeps falling off? This coupling connects the motor to the auger. Simple 15-minute DIY fix restores ice dispensing.

Ice bin cracked or warped? This container stores ice from your icemaker and guides cubes to the dispenser. Simple plug-and-play replacement part.

Broken ice enclosure causing ice jams or warm air leaks? Replace this ice path housing. Moderately easy DIY repair—remove one screw and wire harness.

Ice maker not making ice or overfilling? Replace the complete ice maker assembly to restore automatic ice production. Fixes jammed trays and leaking issues.

The Icemaker is an OEM part for Whirlpool refrigerators. It automatically produces batches of ice using a water inlet and freeze cycle.

Causes can be failures in the temperature probe, water valve, ejection mechanism, or freezing compartment. Mineral buildup from hard water reduces efficiency over many harvest cycles as well.

Symptoms of a bad ice maker include:

• No ice production or low ice yields over time
• Ice cubes appearing cloudy or improperly formed
• Leaking or dripping water inside the freezer
• Clicking or grinding noises during operation

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Ice maker not dropping ice or dispenser jammed? This ice guide assembly restores smooth ice flow from maker to dispenser. Easy DIY repair for most models.

If your ice cube tray is broken or missing, this replacement tray forms and holds standard-sized ice cubes in your freezer. Simple installation.

Ice maker jamming or not dispensing? This ice bucket assembly holds and dispenses ice smoothly. Direct replacement takes 15 minutes with basic tools.

Ice dispenser not working or making noise? The auger helix transports ice from bin to chute. DIY repair takes about 10 minutes with video guidance.

Optional flexible ice tray for those that dont have an icemaker

Ice crusher not working or producing inconsistent crushed ice? This rotating crusher blade restores proper ice crushing when worn, bent, or cracked.

This ice container assembly holds and channels cubed ice from the ice maker to the dispenser area, keeping ice contained and ready for use. It replaces a cracked, warped or missing ice bin to restore normal ice storage. What it does

• Collects and stores ice produced by the ice maker to prevent spills and buildup in the cabinet
• Guides ice toward the dispenser/auger area for consistent delivery
• Prevents ice from jamming or falling into other refrigerator compartments
• Helps maintain proper ice flow when the original bin is damaged or warped

• One ice container assembly

• Disconnect power to the refrigerator before removing or installing the ice container
• Remove existing ice and empty the freezer area to avoid spills during replacement
• Align the bin with the guides and slide into place until it seats securely; do not force
• If ice delivery issues persist after installation, check the ice maker/auger and dispenser components

Ice dispenser clogging or container rusting? This refrigerator ice bin catches and stores ice from your icemaker. Direct replacement takes 15 minutes.