Refrigerator Drawer, Shelf, Pan

Front door shelf rail for refrigerator freezer compartments. Holds smaller frozen items on the door for organized storage. Replaces cracked or broken rails.

Front trim bar for full-width refrigerator shelves. Replaces cracked, broken, or missing trim pieces. Restores secure edge to keep items in place.

Clear utility bin for the fresh food section that stores deli items and snacks. Replace a cracked, broken, or missing drawer to restore organized storage.

Right-side rail supports and guides your refrigerator's meat or deli drawer for smooth operation. Replace if cracked, broken, or worn to prevent tipping.

Replace your cracked or worn refrigerator drawer slide rail to restore smooth gliding for crisper and freezer drawers. Installs on the cabinet side.

This replacement crisper pan sits beneath the refrigerator crisper drawer to catch spills and support stored produce, helping keep the drawer area clean and stable. Fits as the OEM service part for compatible Frigidaire units. What it does:

• Supports the crisper drawer and helps keep fruits and vegetables stable.
• Collects spills and juices to prevent them from dripping into the cabinet below.
• Restores proper drawer seating when a cracked or warped pan prevents full engagement.
• Helps maintain a cleaner, more sanitary drawer area.

• Remove stored food and slide the crisper drawer out to access the pan.
• Lift or unclip the old pan per your refrigerator's service instructions and slide the replacement into the same position.
• Handle carefully and inspect mating rails and seals; replace any damaged hardware before reassembly.
• No special tools required for most models; wear gloves if removing a cracked pan.

Replaces a damaged, cracked, or missing front storage basket in your refrigerator. Restores organized compartment storage and keeps items secure.

Center track that supports and guides refrigerator crisper drawers. Replace if cracked, warped, or broken to restore smooth sliding and proper alignment.

Replace your cracked or worn snack drawer track pan to restore smooth sliding and keep food organized in your side-by-side refrigerator compartment.

This door rack mounts to the inside of the refrigerator or freezer door to hold small items securely. Replace a cracked or missing rack to restore door storage and prevent items from falling when the door opens and closes.

• Provides additional storage on the inner door for jars, condiments, and small items
• Helps keep contents organized and stable during door movement
• Common symptoms: broken or missing rack, items falling from the door, reduced storage space
• Restores original fit and function when the existing rack is damaged

• Unplug the appliance before servicing
• Remove items from the affected door area
• Lift or release the old rack from the end supports/slots; seat the new rack fully into the same supports
• Confirm the rack is secure before reloading and avoid overloading to prevent damage

Structural support that holds and aligns shelves or racks in your side-by-side refrigerator. Replace when worn, broken, or missing to restore stability.

The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth. 

Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.

Symptoms of a bad Drawer Glide Gear include:

• Shelves or drawers that stick or fail to slide freely
• Noisy squeaking or grinding noises coming from shelf areas  
• Shelves difficult to properly align or position as needed

As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replacement crisper pan for refrigerator produce drawers. Replaces cracked, stained, or broken pans. Holds fruits and vegetables securely in place.

The Glide is an OEM part for Frigidaire ranges. It ensures smooth movement of the storage drawer, allowing you to easily access and organize your stored items.

A bad glide can be caused by wear and tear, damage, or lack of lubrication. Signs of a faulty glide include a sticky or jammed drawer, uneven sliding, or a drawer that doesn't close properly.

Symptoms of a bad glide can include:

• Difficulty in opening or closing the storage drawer.
• Uneven or jerky sliding motion of the drawer.
• Drawer getting stuck or not fully closing.

Replace your worn-out or damaged glide with this genuine OEM part to restore movement to your range's storage drawer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This drawer assembly replaces a damaged or missing drawer so items stay contained and the drawer slides smoothly again. Also called a bin or pan, it restores everyday storage and organization inside the appliance compartment.

• Holds and organizes contents; rides on existing rails/tracks for smooth operation
• Restores storage capacity when the original drawer is cracked, warped, or missing
• Helps prevent spills and items falling into the compartment
• Typical symptoms: cracked bin, broken corners/tabs, hard to open/close, falls off track

• Power off the appliance before servicing; remove and empty the old drawer
• Clean and inspect the rails/tracks; replace worn supports separately if needed
• Align the drawer with the tracks and slide fully into place
• Check for smooth travel before reloading contents

Removable silverware basket for the dishwasher lower rack that keeps forks, knives and spoons separated and upright during wash cycles, helping prevent items from shifting, nesting, or blocking spray for better cleaning results. What it does:

• Holds cutlery and small utensils securely to improve wash coverage and reduce nesting.
• Keeps sharp items contained to help protect dishes and reduce movement during cycles.
• Replaces cracked, broken, or missing baskets that allow silverware to fall through the rack.
• Easy to clean—simply rinse or place in the dishwasher top rack if needed.

• Typically installs without tools: slide out the lower rack and set the basket into the designated rack area.
• Ensure the basket is oriented correctly and does not obstruct rack travel or spray arms before running a cycle.
• Inspect surrounding rack tines and clips for damage while replacing the basket.
• Refer to the appliance owner's manual or service guide for model-specific instructions and safety information.