Refrigerator Door

Color: clear. Measures about 11 inches wide by 7 inches high.

Color: Grey

This replacement guide aligns and supports a moving component so it travels on its intended path without binding. Replacing a worn or broken guide restores smooth operation and helps prevent scraping, jamming, or premature wear of connected parts.

• Keeps the associated rack, drawer, or panel centered and properly aligned during movement
• Provides a track/stop for the mating part to follow
• Reduces friction and noise for smoother sliding
• Typical failure signs: sticking, uneven travel, scraping noises, or visible cracks/broken tabs

• Disconnect power; also shut off water or gas
• Remove the associated assembly to access the guide and note its orientation
• Reuse original screws/clips and tighten securely without overtightening
• Test movement after installation; replace worn mating rails or rollers if needed

This is the vertical flipper mullion assembly that mounts to one fresh-food door and pivots closed to seal the center gap when both refrigerator doors are shut, helping maintain proper temperature and energy efficiency.

• Creates the center seal between French-door refrigerator doors
• Helps prevent warm air infiltration and moisture/condensation in the fresh-food section
• Common failure signs include a loose or broken hinge, mullion not staying aligned, condensation at the door center, or doors not sealing properly
• May also be noted if doors pop open or temperature fluctuates in the refrigerator compartment

• Unplug the refrigerator before servicing
• Remove door bins to access mounting screws/clips
• Transfer any original covers or hardware if not part of the new assembly
• Verify proper hinge engagement so the mullion flips and seals smoothly before restoring power

The Mullion Heater is an OEM part for Bosch refrigerators. It is designed to prevent condensation from forming on the refrigerator door mullion, the vertical divider between the doors. This heater ensures that the mullion stays warm enough to stop moisture from condensing and causing potential water damage or mold growth.

Causes of a bad mullion heater can include electrical failures, wear and tear from continuous use, or manufacturing defects.  

Symptoms of a bad mullion heater include:

• Visible condensation or frost on the door mullion
• Water pooling or dripping around the door area
• Increased humidity inside the refrigerator
• Mold or mildew developing near the door seal

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Color: clear. Measures about 13 inches wide by 5 inches high.

Restore a tight, even seal between your refrigerator's doors. This vertical mullion assembly flips into place to cover the center gap, helping maintain proper temperatures and reduce condensation.

• Bridges the gap between doors to create a continuous sealing surface
• Helps keep cold air in and warm air out for consistent cooling
• Aids proper door alignment and smooth closing
• Common symptoms of a failed mullion: broken or wobbly flipper, doors not closing fully or popping open, moisture/icing at the center, warming in the fresh food section

• Disconnect power before servicing and open the doors
• With the door open, release the retaining screws or tabs and lift the old mullion off the upper and lower pivots
• Position the new assembly on the pivots, secure it, and verify the flipper moves freely and seals evenly against the opposite door
• Restore power and recheck door operation and gasket contact along the full height

The Refrigerator French Door Assembly is designed to seamlessly replace the doors on your Samsung French door refrigerator. Crafted as a genuine OEM part, this assembly ensures a perfect fit and maintains the integrity of your appliance. The durable construction provides reliable performance, helping to keep your food fresh and organized. With its sleek design, the Refrigerator French Door Assembly not only restores the functionality of your fridge but also enhances its overall appearance. Compatible with a variety of Samsung refrigerator models, this assembly allows for easy installation, saving you time and effort. Whether your original doors are damaged, cracked, or worn out, the Refrigerator French Door Assembly offers a straightforward solution to restore your refrigerator to its optimal condition. Invest in this genuine OEM part to ensure long-lasting quality and maintain the efficiency of your Samsung refrigerator, providing you with a dependable and attractive kitchen appliance.

The Refrigerator French Door Guide is essential for maintaining the smooth and stable operation of your French door refrigerator. This genuine OEM part is specifically designed for Samsung refrigerator models, ensuring a perfect fit and optimal compatibility. Crafted from high-quality materials, the guide provides robust support and precise alignment for your refrigerator doors, reducing wear and tear and extending the lifespan of your appliance. Easy to install, this part allows you to restore functionality without the need for professional assistance, saving you time and effort. The Refrigerator French Door Guide helps maintain proper door alignment, which not only enhances the aesthetic appeal of your kitchen but also improves energy efficiency by preventing air leaks and drafts. Additionally, it ensures that the doors open and close effortlessly, enhancing your overall user experience. If your original door guide is damaged, worn, or no longer functioning correctly, this genuine OEM part is the ideal solution to keep your Samsung refrigerator operating smoothly and efficiently. Invest in the Refrigerator French Door Guide to ensure reliable performance and prolong the lifespan of your appliance.

This ice compartment door closes off the ice storage area inside the freezer, helping contain cold air and keep ice clean. Replace a cracked or warped door to restore a proper seal and easy access to the bin.

• Covers the ice compartment opening to help maintain temperature around the ice bin
• Hinged panel provides convenient access to the ice container
• Helps minimize frost and moisture at the compartment opening
• Common signs it's needed: cracked/missing door, broken hinge tabs, won't stay closed, frost buildup, or ice clumping near the opening

• Disconnect power to the refrigerator before servicing
• Remove screws, pins, or clips securing the old door; note hinge orientation
• Transfer any reusable hinge pins, latches, or trim from the original if required
• Install and align the new door; confirm smooth operation and a tight closure

Color: clear. It measures about 12 inches wide by 6-1/2 inches high.

This mullion articulation assembly mounts on the fresh food door and flips out to form the center seal between French doors, helping the refrigerator close properly while reducing air leaks and moisture at the door gap.

• Flips between doors to create the center mullion seal in the fresh food compartment
• Helps maintain proper door alignment and smooth closing
• Damage or wear may cause poor sealing, condensation or frost at the center, or temperature issues
• Common clues include a broken hinge/pivot, warped or loose rail, or a flipper that sticks

• Disconnect power before servicing
• Remove door bins/shelves for access, then take out the screws or clips securing the old mullion; note orientation
• Position the new assembly, transfer any caps/fasteners if needed, and tighten securely
• Close both doors to ensure the flipper moves freely and the center seal is even

The Refrigerator French Door Assembly is designed to restore the functionality and sleek appearance of your Samsung refrigerator. This genuine OEM part ensures a perfect fit, maintaining the integrity and performance of your appliance. Crafted with high-quality materials, the assembly includes durable doors and essential hardware that provide reliable operation and enhance the overall user experience. Installing the Refrigerator French Door Assembly not only revitalizes the look of your fridge but also ensures efficient organization and optimal food preservation. Compatible with a wide range of Samsung refrigerator models, this assembly is easy to install, allowing you to quickly restore your appliance without hassle. Whether your original French door assembly is damaged, worn, or no longer functioning properly, this genuine OEM part is the ideal solution to bring your refrigerator back to peak performance. Trust in this reliable component to deliver long-lasting results and improve the everyday use of your Samsung refrigerator.

The Mullion is an OEM part for Frigidaire refrigerators. It is situated between the freezer and refrigerator doors to separate the two compartments. The mullion provides structure, sealing the doors against air and temperature leakage.

Causes of a bad mullion can include wear and tear over time, damage from frequent door opening and closing, or impact damage.

Symptoms of a bad mullion include:

• Air and temperature leakage between compartments
• Difficulty closing one or both doors securely
• Gaps or cracks seen around the mullion frame
• Scratches, dents or other physical damage

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This door shelf trim is the front retainer bar that snaps across a refrigerator door bin to keep items in place. Replace a cracked or missing trim to restore secure storage on the door and prevent spills.

• Holds items within the door bin by providing the front retaining edge
• Common failure signs: cracked/broken bar, won't snap or stay in place, items sliding out of the bin
• Restores proper fit and appearance of the door shelf area

• Unplug the refrigerator before beginning any repair
• Lift off the affected door bin to access the trim
• Align the trim tabs with the bin slots and snap into place without forcing
• Verify the bin is seated securely on the door before use

This door trim is the decorative/protective molding that finishes the edge of the appliance door. Replacing damaged trim restores a clean appearance and a snug fit, helping reduce vibration noise and protecting exposed edges.

• Provides a finished, protective edge around the door
• Conceals fasteners and seams for a clean look
• Helps minimize rattles when properly secured
• Replace if cracked, warped, loose, discolored, or missing

• Disconnect power before servicing
• Open the door and note screw/clip locations; protect nearby surfaces with tape
• Carefully remove the old trim; transfer any clips/brackets from the original if applicable
• Align and secure the new trim; do not overtighten fasteners